yamiraptor
02-23-2006, 06:51 PM
I was wondering if anyone has had a problem with the sprocket hub on the raptor? It seems that the splines have a small amount of play in it. So i backed the locking nut off and tighten the inside nut up more. It then apears that it's tight but soon as i go for a short ride it has slop again. All the ones i check at the dealer doesn't do it. The bearings are wiped out but i don't think that the new ones i'm going to put back in are going to make a difference. The problem seems to be slopy splines. I'd say about 1/32-1/16 Should be none. Thanks for any help.
YAMIRAPTOR:confused:
YAMIRAPTOR:confused: