The Right way to put on graphics?

[ryeguy]

hey all Im considering getting these graphics and i just wanted to know any hints on how to properly put on the graphics and the seat? I know its probably simple but any experienced advice would help. Thanks a bunch. http://cgi.ebay.com/ebaymotors/Yamaha-RAPTOR-660-Graphics-Seat-Cover-ATV-QUAD-GD3-AZB_W0QQcmdZViewItemQQcategoryZ43975QQitemZ4616011 090QQrdZ1

[tater_kamik]

it is very simple, make sure the surface is clean. use a cleaner on your plastic to get all of the stuff you cannot see off. i like to line everything up to see how it will fit first to get an idea of how it will fit and where i need to start. then, i work slowly to apply it making sure that i work out any bubbles. i have heard of people putting water or something like that on the plastic to make it easier to put on and work any probs out, then using a heat gun but i havent ever used that method

[DieselBoy]

i was also wondering how this is done without any errors... anyone else have ideas?

[ECATV Raptor]

I just recently put some graphics on my raptor and the directions said not to use cleaner. Just hose it down and let it dry. Then let it sit for 48 hrs. (according to GYTR directions.)

[Robin Hood]

Clean the surface off and just apply regularly. You'll probably get some bubbles, so what I did is I got another friend to help me heat up the graphics with a heat gun and just rubbed the bubbles out.

[DieselBoy]

bump,,,,,,,,,,,,,,,,,

[Racing Rice]

Here is a nice how-to for anyone looking for directions.

http://www.raptortranny.com/phpBB2/viewtopic.php?t=1282