Parting 2004 XC Raptor... RPM, Houser, Works and Much More!

[Bronson90]

*** ADDED FRONT, REAR HIPERS & TIRES ***

*** REDUCED & UPDATED LIST ***

Parting out a complete 2004 Yamaha Raptor 660 with less than 50 original hours on it. Everything listed below is forsale. If it isn't listed please ask about availability. Have confidence as I have 100% perfect feedback on eBay as Bronson90 as well immaculate feedback on all of the forums. Personal references are also available upon request. If you have any questions please feel free to email directly or call... Prices DO NOT include shipping, Paypal and certified funds are welcomed...

CONTACT INFO:

Jonathan Wulf - jonathanwulf@yahoo.com - (936) 591-2960 cel. (Owner)
Bronson Blackson - bronson@blackson.net - (214) 533-5358 cel. (Builder)

PARTS AVAILABLE:

2004 Frame - Texas Clean Title, Original PC in Good Condition, No Bends, Cracks, or Repairs - $800
Subframe - $175
Complete '04 Motor - Wiseco 11:1 Standard Bore Piston, Stage 1 Hotcams, Magnetic Drain Plug, No Starter or Waterpump (>50 Hours on Motor & >5 Hours Topend) - $1650
10x5 Hiper Wheels w/ Single Blue Rings, Yamaha 4/156 Pattern, 4+1 Offset (>5 hr. use, Pair) - $275
10x10 Hiper Wheels w/ Dual Blue Rings, Yamaha 4/115 Pattern, 4+6 Offset (>1 hr. use, Pair) - $325
23x7x10 ITP XCT Tires (>5 hr. use, 95+% Tread, Pair) - $80
22x11x10 ITP XCT Tires (>1 hr. use, 95+% Tread, Pair) - $120
Tag +2 Chrome Steering Stem w/ 1 1/8" Anti-Vibe Clamp - $225
Works Performance Pro Series Triple Rate Front Piggyback w/ Rebound & Compression (190-210# MX) - $500
Works Performance Ultracross Dual Rate Rear Remote Reservoir w/ Rebound & Compression (190-210# MX, Blue Billet Clamps) - $500
RK 520 X-Ring Chain w/ Master Link - $50
KKM 520 Blue O-Ring Chain w/ Master Link - $35
Sunstar 12T Steel Counter Sprocket - $10
MSR Clutch Lever & Perch w/ Motion Pro OEM Clutch Cable - $25
Streamline +2 SS Rear Brake Line - $30
Custom Finned Billet Liquid Filled Temp Gauge - $60
AC Racing Chassis Skid - $40
Stock Thumb Throttle w/ Stock Throttle Cable - $65
Stock Gas Tank w/ Polsihed Pingel Petcock ( No Reserve - $50
Stock Harness w/o Starter Relay - $40
Stock CDI - $20
Stock Front Calipers - $40 ea.
Stock Rear Caliper w/ E-Brake Block Off - $50
Stock Rear Master Cylinder - $40
Stock Rear Linkage - $25
Stock Coolant Overflow Tank - $10
Stock Rear Rotor - $20
Magura Hydraulic Jack 10.5mm Complete Master Cylinder w/ Lever – BRAND NEW - $75

ALREADY SOLD:

Curtis Sparks X-6 Ceramic Coated Exhaust
CFM Perfomrance Oversized Oil Tank
Seat w/ Custom Stitched Cover & Pad
AC Racing Pro Pegs
AC Racing Bumper
AC Racing Grab Bar
AC Racing 250R Swingarm Skid
Edelbrock Carburetor
Insane Performance Aluminum High Flow Air Box w/ K&N Air Filter & Outerwear (Red)
Stock Radiator
Stock Front Rotors
Stock Spindles
Stock Blue Plastics w/ K&K Blue Tribal Flame Graphics
Stock Starter
Stock Complete Front Master Cylinder w/ Lever & ASV Blue Rotator Clamp
Tag T2 Blue Handlebars (1009 Bend) w/ Tag Medium Blue Grips * Blue Bar Pad
RPM Tapered Bearing Front Hubs (Yamaha)
Streamline +2 SS Front Brake Lines (Dual Line)
Complete Houser +2 Standard Travel Front End - Blue A-Arms, Chrome Uppers, Chrome Tie Rods w/ Tie Rod Ends
Pro Design Case Saver
GYTR Billet Starter Cover (RARE)
Magura Hydraulic Clutch w/ ASV C5 Lever, ASV Rotator Clamp & Magura Bleed Kit (9.5mm Piston)
Pro Design Black Kill Switch
Pro Design Super Cooler
RPM +1.25 Fully Adjustable Round House Swingarm (Blue Vein)
RPM Dominator +1/+4 250R Axle
RPM Millennium Honda 250R Carrier w/ Tapered Bearings
RPM 250R Antifade w/ Yamaha Bolt Pattern
RPM 250R Rear Hubs
Sunstar 42T Steel 250R Rear Sprocket


PICS:

http://www.blackson.net/atv/raptor_handlebars.JPG
http://www.blackson.net/atv/raptor_left_front.JPG
http://www.blackson.net/atv/raptor_motor_left.JPG
http://www.blackson.net/atv/raptor_motor_right.JPG
http://www.blackson.net/atv/raptor_front.JPG
http://www.blackson.net/atv/raptor_front_top.JPG
http://www.blackson.net/atv/raptor_front_close.JPG
http://www.blackson.net/atv/raptor_top_rear.JPG
http://www.blackson.net/atv/raptor_air_box.JPG
http://www.blackson.net/atv/houser_left_1.JPG
http://www.blackson.net/atv/houser_right_1.JPG

[freerider]

do you know if yfz shocks will fit on these arms without cutting anything?

[mdidonne]

tried calling you guys, no answer this morning.

PM you,

[Bronson90]

btt, updated list...

[Bronson90]

freerider: the frontend has been sold. the front shocks are still available. i am not sure, houser could surely answer that question...

mdidonne: i have returned both of your pm's.

[mdidonne]

pm again

[Bronson90]

reply sent.

[Bronson90]

updated...

[croegt350]

hey...do you have a clutch cover for sale by any chance?

[Bronson90]

no unfortunately I don't, the motor is going complete. check ebay and you will find one...

[mdidonne]

you were suppose to get back to me on the stem

[Bronson90]

i remember talking to someone about the stem on my cel monday evening but i am not sure that was you. please pm me again to fresh my memory. sorry for the delay. i am getting about 50 pm's a day on each of the 14 forums i have this posted as well as atleast 20 direct emails and even a few calls on my cel. this is occupying quite a bit more time than i thought it would so please bear with me... thanks for your patienece.

[Bronson90]

i found your pm. yeah what we discussed is okay. tell me what info i need from the owner to give you. get back to me asap.

[killen them all]

what do you want for the oil tank and can you get a better pic of the oil tank

[Bronson90]

sold long ago...

[killen them all]

clutch lever and cable