Wheels are bowing inward HELP!!

[416expowerman]

when i stand and look at my quad fron the front view it looks like my wheels are bowing inward. what could be wrong. is it the alignment or is sonething bent???can i adjust it to be straight???

thx

[Jersey450R]

type of quad? type or arms? ball joints? heim joints? +1, +2, +3? stock? aftermarket?

cmon dude...

[quader400]

inward like this / \ or like \ / stock or aftermarket arms? need more info

[416expowerman]

it bows in like this \ / from a top view and every thing on the front suspension is stock right now. idk if its effecting anything or not.

[josiah400ex]

im not a pro, but I think its supposed to be that way, a little...

[bansheemorphine]

yah i think it is suposed be like \/ a little bit but not a whole lot

[300exOH]

Your front tires should toe in about 1/4" total. You can measure the distance at the back of the front tires and compare it to the front. They should be 1/4" closer at the front.

[416expowerman]

ok i will try that, but will the tie rod adjuster change the way it is if i adjust it.

[44oEX]

yep...you can set the toe in or out with the tie rods...just make sure to be equal on both sides

[416expowerman]

ok thanx