KEVIN-SKI#14
02-19-2006, 11:07 AM
Im selling a full JRD CRF 450 quad. Almost everything on the quad is new or rebuilt. Every product on the atv is top of the line (the best, best quality, atc...). new blue, yellow and black powdercoating job on all componets, and tripple dipped chrome +4 +2 JRD lower A-arms. the JRD Frame can fit one of 5 different motors, by only changing motor-mounts, (crf450, yz450f, 400ex, yz426and trx250r).
The motor was also just rebuilt by JRD. It is a 2002 honda CRF 450 dirtbike motor, with all up dated parts, and a new 2005 crf piston. The motor was origionaly buit by Pete Payne, it is ported and pollished, and has a stage1 hot cam. the motor runs very well, and was one of the fastest ones at ATV mx national races in the A-class. I usually got top 5 holeshot at all nationals i went to.
This ATV is ment for Serious ATV MX racing and is built to withstand national A-class, and Pro-Am racing. im asking 14,000 for the complete atv.
Some JRD parts on the ATV are...
Full JRD frame
JRD mx a-arms
JRD short swingarm.
aluminum radiator and shrowds,
pollished aluminum radiator over-flow,
adjustable steering stem, front bumper,
spindles, and aluminum front brake line holders,
front and rear billet hubs,
rear aluminum grab-bar
all motormounts, pollished aluminum airbox
rear - fliptop fender and seat assembly
front - quick remove fender assembly
rear aluminum twin taper bearing carrier.
and more.
other parts and componets....
ITP- black powdercoated bead-lock rear rims
ITP powdercoated black rolled front rims
ITP mxr4 front and rear holeshots.
Motion Pro cables,
Braking rotors and pads,
top of the line axis suspension f/b
Dirtfirst aluminum handle bar clamp
Lonestar pollished aluminum steering stem clamp,
Denton 7 way adj steering damper,
Hinson clutch
Works adj cllutch lever and perch
aluminum rear brake master cilinder guard
stage one hot cam
AC pro-peg nerf bars, and soo much more...
I have a ton of extra parts, various gaskets, seals, honda engine componets, nuts, bolts, etc....
there are a few finishing touches i have to make on it, the exhaust will be ready to put on soon, and will most likely be a DG Bullit set-up.
Check out the pictures, and e-mail me for a bunch of pictures, or if you have any questions.
Kevin Nowakowski
rnowakowski1@adelphia.net
The motor was also just rebuilt by JRD. It is a 2002 honda CRF 450 dirtbike motor, with all up dated parts, and a new 2005 crf piston. The motor was origionaly buit by Pete Payne, it is ported and pollished, and has a stage1 hot cam. the motor runs very well, and was one of the fastest ones at ATV mx national races in the A-class. I usually got top 5 holeshot at all nationals i went to.
This ATV is ment for Serious ATV MX racing and is built to withstand national A-class, and Pro-Am racing. im asking 14,000 for the complete atv.
Some JRD parts on the ATV are...
Full JRD frame
JRD mx a-arms
JRD short swingarm.
aluminum radiator and shrowds,
pollished aluminum radiator over-flow,
adjustable steering stem, front bumper,
spindles, and aluminum front brake line holders,
front and rear billet hubs,
rear aluminum grab-bar
all motormounts, pollished aluminum airbox
rear - fliptop fender and seat assembly
front - quick remove fender assembly
rear aluminum twin taper bearing carrier.
and more.
other parts and componets....
ITP- black powdercoated bead-lock rear rims
ITP powdercoated black rolled front rims
ITP mxr4 front and rear holeshots.
Motion Pro cables,
Braking rotors and pads,
top of the line axis suspension f/b
Dirtfirst aluminum handle bar clamp
Lonestar pollished aluminum steering stem clamp,
Denton 7 way adj steering damper,
Hinson clutch
Works adj cllutch lever and perch
aluminum rear brake master cilinder guard
stage one hot cam
AC pro-peg nerf bars, and soo much more...
I have a ton of extra parts, various gaskets, seals, honda engine componets, nuts, bolts, etc....
there are a few finishing touches i have to make on it, the exhaust will be ready to put on soon, and will most likely be a DG Bullit set-up.
Check out the pictures, and e-mail me for a bunch of pictures, or if you have any questions.
Kevin Nowakowski
rnowakowski1@adelphia.net