setting the rear shock preload?

[crash83]

does anyone know what the rear sag or pre load should be set at for a 02 rappy?i bought mine and the guy before me took out all the preload adjustment so it would sit lower[for tt]and im coming off of bike and know how to set it just not sure of the numbers[is it 100 mm like a banshee?]

[Cevans18]

Standard length is 254mm (9.96 in)
Minimum 245mm (9.65 in)
Maximum 260 mm (10.24 in)

Rebound
Standard 10 clicks out from fully turned-in postion
minimum 3 clicks out
maximum 20 clicks out

Compression
standard 7 clicks in from fully turned-out postion
minimum 1 click in
maximum 12 clicks in

[crash83]

at what points were these measurements taken...from the ground to the fender?

[Cevans18]

This is the total length of your spring from end to end. Make sure when you measure that the rear wheels are elevated off the ground by placing a stand under the frame(but not on the swingarm). First you loosen the locknut then turn the adjusting ring counter clockwise to increase preload or counter clockwise to decrease preload. The length of the spring changes 1.5mm (0.06 in ) per turn of the adjuster.

[crash83]

at what points were these measurements taken...from the ground to the fender?