March Quad of the Month entry thread, 200-350cc sport quads

[TheFontMaster]

Alright everyone, this month the Quad of the Month is for just sport class quads. Any quad between 200, and 350cc's will be alowed. You have one week to enter your quads.

Here is the rules,
http://www.exriders.com/vbb/showthread.php?s=&threadid=146713

And the mods list that needs to be copied, filled out and posted with your quad.
http://www.exriders.com/vbb/showthread.php?s=&threadid=162941

[BlasterEaten250]

I would if I had a chance. Maybe if there is a cleanest looking quad one:o

[Honda TRX250ex]

I'll give it a try.


Chassis | Suspension | Controls:

Frame: Stock
A Arms: Stock
Swingarm: Stock
Steering Stem: Stock
Stbilizer: none
Axle: Stock
Carrier: HellBound racing
Locknut: HellBound Racing
Hubs F|R: Stock
Bars: Renthal Aluminum
Throttle/Clutch Lever: Sunline Clutch Leve
Grips: Factory 909
Nerfs: Tusk Comp Series
Bumper: AC Mudscreen Bumper
Grab Bar: DG
Front Shocks: Stock
Rear Shock: Stock
Brake Lines: Stock fronts 350x rears
Rotors F|R: Stock
Rims F|R: Douglas .125 Aluminum Fronts Douglas .190 Rears Aluminum
Tires F|R: Front Kenda Klaws Rear Maxxis Razr



Body:

Plastic: Maier Race Cut
Graphics|Seat Cover: Sponsor Stickers Ceet Flame Seat cover
Number Backgrounds: Attack Graphic
Handguards: None
Bar Pad: Fox Racing
Fuel Tank: Stock



Engine|Drive System:

Cylinder|Head: Wiseco Piston and Rings
Bore & Stroke: .40
Displacement: 246
Carburetor: Stock
Air Filter|Box: UNI Air Fliter
Pipe|Silencer: FMF MegaMax Full System
Clutch|Plates: EBC Clutch Kit
Gearing F|R: 13/36
CDI|Killswitch: Pro Design ATV Tether Kill Switch
Cooling: Air
Other:




<a href="http://photobucket.com" target="_blank"><img src="http://i13.photobucket.com/albums/a265/NacsRacingHonda/Allthequads124.jpg" border="0" alt="Image hosting by Photobucket"></a>


<a href="http://photobucket.com" target="_blank"><img src="http://i13.photobucket.com/albums/a265/NacsRacingHonda/Allthequads122.jpg" border="0" alt="Image hosting by Photobucket"></a>


<a href="http://photobucket.com" target="_blank"><img src="http://i13.photobucket.com/albums/a265/NacsRacingHonda/Allthequads171.jpg" border="0" alt="Image hosting by Photobucket"></a>


<a href="http://photobucket.com" target="_blank"><img src="http://i13.photobucket.com/albums/a265/NacsRacingHonda/Allthequads125.jpg" border="0" alt="Image hosting by Photobucket"></a>


<a href="http://photobucket.com" target="_blank"><img src="http://i13.photobucket.com/albums/a265/NacsRacingHonda/Allthequads141.jpg" border="0" alt="Image hosting by Photobucket"></a>


<a href="http://photobucket.com" target="_blank"><img src="http://i13.photobucket.com/albums/a265/NacsRacingHonda/Allthequads126.jpg" border="0" alt="Image hosting by Photobucket"></a>


<a href="http://photobucket.com" target="_blank"><img src="http://i13.photobucket.com/albums/a265/NacsRacingHonda/Allthequads158.jpg" border="0" alt="Image hosting by Photobucket"></a>


<a href="http://photobucket.com" target="_blank"><img src="http://i13.photobucket.com/albums/a265/NacsRacingHonda/Allthequads155.jpg" border="0" alt="Image hosting by Photobucket"></a>


<a href="http://photobucket.com" target="_blank"><img src="http://i13.photobucket.com/albums/a265/NacsRacingHonda/Allthequads131.jpg" border="0" alt="Image hosting by Photobucket"></a>

[250ex13]

Worth a try

Chassis | Suspension | Controls:

Frame:Stock
A Arms:Stock
Swingarm:Stock
Steering Stem:Stock
Stbilizer:Stock
Axle:Stock
Carrier:Stock
Locknut:Stock
Hubs F|R:Stock
Bars:Pro taper se
Throttle/Clutch Lever:Stock
Grips:scott
Nerfs:None
Bumper:Ac racing
Grab Bar:Ac racing
Front Shocks:Stock
Rear Shock:Stock
Brake Lines:Stock
Rotors F|R:Stock
Rims F|R:dougle's .190 (polished)
Tires F|R:Razors



Body:

Plastic:Stock
Graphics|Seat Cover:Stock
Number Backgrounds:One Industries
Handguards: Acreibis rally pro
Bar Pad: pro taper
Fuel Tank:Stock



Engine|Drive System:

Cylinder|Head:stock
Bore & Stroke:.40
Displacement:249
Carburetor:Stock
Air Filter|Box:Uni
Pipe|Silencer:HMF sport series
Clutch|Plates:EBC
Gearing F|R:Stock
CDI|Killswitch:
Cooling:
Other:

http://i31.photobucket.com/albums/c395/redrder53/IMAG0093.jpg:macho:devil:

[250ex13]

http://i31.photobucket.com/albums/c395/redrder53/IMAG0092.jpg

[250ex13]

..

[Ripitupfilms]

I try with my quad



Chassis | Suspension | Controls:

Frame: Laegers 250r frame made special for 300ex/250x/350x engines
A Arms: + 2 + 1
Swingarm: Laeger’s stock length
Steering Stem: Laeger’s stock length
Stbilizer: Denton
Axle: RPM
Carrier: RPM
Locknut: RPM
Hubs F|R: stock
Bars: Azonic / with Atv Addiction bar pad
Throttle/Clutch Lever: P.E.P. clutch lever and warrior throttle
Grips: Oury
Nerfs: AC racing
Bumper: IMS
Grab Bar: AC
Front Shocks: Elka triple rate
Rear Shock: Elka SSD dual rate
Brake Lines: Galfier
Rotors F|R: fronts stock / rear wavy rotor
Rims F|R: ITP
Tires F|R: Holeshot/ groove radials



Body:

Plastic: Maier race cut
Graphics|Seat Cover: Legacy Atv
Number Backgrounds: Legacy atv
Handguards: None
Bar Pad: Atv Addiction
Fuel Tank: stock with black tank cover



Engine|Drive System:

Cylinder|Head: Stock with different jug
Bore & Stroke: 273cc stock stroke
Displacement: 273cc
Carburetor: lectron
Air Filter|Box: UNI/ Stock box
Pipe|Silencer: TC racing
Clutch|Plates: stock
Gearing F|R: 14/38
CDI|Killswitch: Curtis Sparks / Pro design
Cooling: Nothing
Other:

[01blaster5415]

Chassis | Suspension | Controls:

Frame: 2000 Blaster
A Arms: Burgard +3 +1
Swingarm: +3 Banshee swingarm shop
Steering Stem: stock
Stbilizer: none
Axle: TEAM Firestick
Carrier: stock
Locknut: none
Hubs F|R: raptor fronts team rears
Bars: FLY
Throttle/Clutch Lever: stock
Grips: renthal
Nerfs: tusk
Bumper: dg classic
Grab Bar: stock
Front Shocks: ELKA
Rear Shock: Stock
Brake Lines: steel braided
Rotors F|R: front raptor Rear stock
Rims F|R: douglas .190
Tires F|R: Maxxis razr mx



Body:

Plastic: stock blue
Graphics|Seat Cover: stock
Number Backgrounds: nasus
Handguards: none
Bar Pad: Fly
Fuel Tank: none



Engine|Drive System:

Cylinder|Head: Vitos Big Bore
Bore & Stroke: 240 NA
Displacement: 240
Carburetor: 28mm
Air Filter|Box: Moose stock
Pipe|Silencer: FMF fatty Power core 2
Clutch|Plates: stock
Gearing F|R: 14 stock
CDI|Killswitch: gunnar
Cooling: air
http://i17.photobucket.com/albums/b94/livetoride154/Flying%20Dutchment%209-4-05/My%20Quad/PICT0008.jpg

http://i17.photobucket.com/albums/b94/livetoride154/Flying%20Dutchment%209-4-05/My%20Quad/PICT0005.jpg

http://i17.photobucket.com/albums/b94/livetoride154/Flying%20Dutchment%209-4-05/My%20Quad/PICT0004.jpg

http://i17.photobucket.com/albums/b94/livetoride154/Flying%20Dutchment%209-4-05/My%20Quad/DSCN1396.jpg

[Ripitupfilms]

sorry i dont know how to post more than one pic on a post

[atvfrk10]

Frame:
A Arms: Stock with widening kit
Swingarm: stock
Steering Stem: stock
Stbilizer: none
Axle: Durablue
Carrier: stock
Locknut: stock
Hubs F|R: stock
Bars: Renthal
Throttle/Clutch Lever: stock
Grips: Scott
Nerfs: DG
Bumper: Dirt Screen
Grab Bar: stock
Front Shocks: works; Z400
Rear Shock: stock
Brake Lines: stock
Rotors F|R: stock
Rims F|R: ITP
Tires F|R: Kenda Klaws



Body:

Plastic: Stock; Race cut
Graphics|Seat Cover: stock
Number Backgrounds: none
Handguards: Acerbis
Bar Pad: Renthal
Fuel Tank: Stock



Engine|Drive System:

Cylinder|Head: Stock
Bore & Stroke: stock 68.5mm x 62.2mm
Displacement: 229cc
Carburetor: Stock
Air Filter|Box: K&N/ Stock
Pipe|Silencer: Pro Circuit
Clutch|Plates: Stock
Gearing F|R: Stock
CDI|Killswitch: Pro Design
Cooling: Air
Other:

[Sjorge450R]

when do i have to get the pictures posted. All I have are some outdated ones and need to get some new ones?

[bradley300]

Frame: Stock 2003 blaster, yamaha blue pc,mod for YFZ front bumper
A Arms: Snyder Motorsports +3+1 LT
Swingarm: Snyder Motorsports +1
Steering Stem: Snyder Motorsports +2 extended stocker
Stbilizer: none
Axle: LSR +4
Carrier: LSR
Locknut: Stock
Hubs F|R: Stock/yfz450 gyt-r
Bars: Tag T-2
Throttle/Clutch Lever: Stock/ASV
Grips: Spider
Nerfs: none
Bumper: PRM Summit (from YFZ)
Grab Bar: PRM desert
Front Shocks: Elka tripple rate/full adjust, GThunder revalves
Rear Shock: Elka Dual rate/full adjust, GThunder revalve
Brake Lines: Stramline
Rotors F|R: stock
Rims F|R: Hiper
Tires F|R: ITP holeshot



Body:

Plastic: white/stock, blue/maier,project blaster
Graphics|Seat Cover: custom by mxprographx/stock
Number Backgrounds: mxprograpx
Handguards: maier (in pic, cycra pro bend now)
Bar Pad: tag (when on)
Fuel Tank: clarke 3.5 gallon modded by gthunder for dry brake



Engine|Drive System:

Cylinder|Head: stock, ported by Snyder Motorsports/stock modded by Snyder motorsports

Bore & Stroke: stock/plus 4mm stroke (hot rods crank and rod)
Displacement: 209cc
Carburetor: 30mm Oko
Air Filter|Box: white brothers/stock
Pipe|Silencer: LRD rfx
Clutch|Plates: HD springs (dont kow brand) stock plates
Gearing F|R: stock 13/40
CDI|Killswitch: stock/pro design
Cooling: air baby!
Other:yellow number plate pics are gncc, white are from the 12 hours. The "laegers" swingarm has been replaced with a Snyder Motorsports since pics were taken


__________________

[bradley300]

http://i14.photobucket.com/albums/a308/bradley300/fourwheeler/brad012.jpg
http://i14.photobucket.com/albums/a308/bradley300/fourwheeler/brad011.jpg
http://i14.photobucket.com/albums/a308/bradley300/fourwheeler/12hr.jpg
http://i14.photobucket.com/albums/a308/bradley300/fourwheeler/brad010.jpg

[Tri-valleyracin]

Chassis | Suspension | Controls:

Frame:stock
A Arms:laegar +2
Swingarm:350x
Steering Stem:stock
Stbilizer:none
Axle:stock +4 spacers
Carrier:stock/not for long
Locknut:stock
Hubs F|R:250x/stock
Bars:fly bars but getting factory 909
Throttle/Clutch Lever:stock not for long
Grips:scott
Nerfs:dg
Bumper:dg
Grab Bar:dg
Front Shocks: works triple rate,400ex
Rear Shock:350x
Brake Lines:stock
Rotors F|R:stock
Rims F|R:itp / itp
Tires F|R:holshot/mxr4



Body:

Plastic:stock
Graphics|SeatCover:tri-valleyracing/stock
Number Backgrounds:not shure brand
Handguards: not shure brand
Bar Pad:fly
Fuel Tank:stock



Engine|Drive System:

Cylinder|Head:stock
Bore & Stroke:stock
Displacement:282
Carburetor:stock
Air Filter|Box:k&n/stock
Pipe|Silencer:Sotck right now/pro circuit t4
Clutch|Plates:stock
Gearing F|R:14/36
CDI|Killswitch:stock/pro design
Cooling:air /soon to have custom air scoops
Other:ims pegs/shock relocation/full body skid plat/ o ring chain

http://tri-valleyracing.com/tri-valleyracing/video/tjsouth0924.wmv

[Tri-valleyracin]

1

[Tri-valleyracin]

i dont have pics of the 400ex shocks on it cusei did it after the season ended and its kind of in peaces right now. 2

[Tri-valleyracin]

3http://tri-valleyracing.com/jolly4.jpg

[Tri-valleyracin]

4

[Tri-valleyracin]

5 l this is the quad a rear agohttp://tri-valleyracing.com/tri-valleyracing/graphics/the-ride.jpg

[Tri-valleyracin]

http://tri-valleyracing.com/tri-valleyracing/graphics/southwicktjgline.jpg

[Tri-valleyracin]

http://tri-valleyracing.com/graphics/images/tjprac.jpg

[Tri-valleyracin]

last one
http://tri-valleyracing.com/graphics/images/JOLLYW.jpg

[killen them all]

Chassis | Suspension | Controls:

Frame: stock
A Arms: +2
Swingarm: stock
Steering Stem: +1
Stbilizer: stock
Axle: banshee
Carrier: lsr
Locknut: lsr
Hubs F|R: blaster front banshee rear
Bars: renthal
Throttle/Clutch Lever: billet
Grips: scott
Nerfs: dg
Bumper: ac
Grab Bar: ac
Front Shocks:banshee
Rear Shock: banshee
Brake Lines: +2
Rotors F|R: stock front banshee rear
Rims F|R: douuglas
Tires F|R: stock front fast treckers /sand shark in rear



Body:

Plastic: 2004
Graphics|Seat Cover: stock
Number Backgrounds: white
Handguards: dnone
Bar Pad: msr
Fuel Tank: custom



Engine|Drive System:

Cylinder|Head: ported
Bore & Stroke: vito's 240 kit
Displacement:
Carburetor: keihen 35mm flat side
Air Filter|Box: K&N
Pipe|Silencer: fmf fatt power core2
Clutch|Plates: burnet
Gearing F|R: 14 / 42
CDI|Killswitch: vito's
Cooling: air
Other:

[killen them all]

pic of it in my back yard you can see the lake good fishing there

[killen them all]

last pic i have more if you need them here it has rear cut fenders

[trX250eXmXr28]

Chassis | Suspension | Controls:

Frame:stock
A Arms:stock
Swingarm:stock
Steering Stem:stock
Stbilizer:stock
Axle:stock
Carrier:stock
Locknut:stock
Hubs F|R:stock
Bars:stock
Throttle/Clutch Lever:modified stock
Grips:stock
Nerfs:DG
Bumper:stock
Grab Bar:stock
Front Shocks:stock
Rear Shock:stock
Brake Lines:stock
Rotors F|R:stock
Rims F|R:T-9, douglous .190
Tires F|R:holeshot Xcr's and Kenda claw Mxr



Body:

Plastic:stock
Graphics|Seat Cover:stock
Number Backgrounds:none
Handguards: none
Bar Pad:none
Fuel Tank:stock



Engine|Drive System:

Cylinder|Head:stock
Bore & Stroke:stock
Displacement:282cc
Carburetor:stock
Air Filter|Box:stock
Pipe|Silencer:Pro Circuit T-4
Clutch|Plates:stock
Gearing F|R:stock
CDI|Killswitch:MPS
Cooling:air
Other:shock covers , tusk PB block off


http://image64.webshots.com/64/0/21/87/543202187uLsfYD_ph.jpg
http://image54.webshots.com/54/0/24/57/543202457jAoAEL_ph.jpg
http://image61.webshots.com/61/0/22/67/543202267tSPgGf_ph.jpg
http://image64.webshots.com/64/0/24/67/543202467JUSwYc_ph.jpg
http://image56.webshots.com/56/0/20/12/543202012brjYOT_ph.jpg
http://image57.webshots.com/57/0/21/9/543202109BSDivf_ph.jpg
http://image62.webshots.com/62/0/27/58/543202758SRaBmB_ph.jpg

[rollie]

I'll give it a try.


Chassis | Suspension | Controls:

Frame: Stock
A Arms: Burgaurd +2+1
Swingarm: Stock
Steering Stem: Stock
Stbilizer: none
Axle: LSR +4
Carrier: LSR
Locknut: Stock
Hubs F|R: Stock
Bars: Renthal Fatbars
Throttle/Clutch Lever:stock/stock
Grips: Renthal medium
Nerfs: AC
Bumper: AC Mudscreen
Grab Bar: stock
Front Shocks: Elka
Rear Shock: Stock
Brake Lines: Stock
Rotors F|R: EBC
Rims F|R:Douglas .190 fronts, Douglas .190 conv center beadlocks rear
Tires F|R: Front Kenda Klaws Rear ITP holeshot MXR-4



Body:

Plastic: Stock, Cut
Graphics|Seat Cover: none
Number Backgrounds: K&K ATV
Handguards: Cycra stealth
Bar Pad: TAG metals
Fuel Tank: Stock



Engine|Drive System:

Cylinder|Head: stock/bored
Bore & Stroke: .80
Displacement: 298
Carburetor: Stock/jetted
Air Filter|Box: K&N air filter
Pipe|Silencer: Big gun full system
Clutch|Plates: Barrent Clutch
Gearing F|R: 14/36
CDI|Killswitch: Pro Design ATV Tether Kill Switch
Cooling: Air
Other:

[ridered54]

Chassis | Suspension | Controls:

Frame: Stock
A Arms: Stock
Swingarm: Stock
Steering Stem: Brand New Stock
Stbilizer: none
Axle: 2003 300ex
Carrier: dual row aluminum
Locknut: stock
Hubs F|R: stock/400ex
Bars: tag t2
Throttle/Clutch Lever: stock
Grips: scott hurricane
Nerfs: none
Bumper: dg modified to hold headlight
Grab Bar: stock painted silver
Front Shocks: '92 250x
Rear Shock: '92 250x
Brake Lines: stock rear, 2002 300ex complete front brake system
Rotors F|R: stock
Rims F|R: douglas red lables
Tires F|R: bandit/ spider trac



Body:

Plastic: Maier
Graphics|Seat Cover: DMP Graphics
Number Backgrounds: none
Handguards: Powermadd
Bar Pad: Tag T2
Fuel Tank: stock



Engine|Drive System:

Cylinder|Head: stock
Bore & Stroke: .20 over
Displacement: stock
Carburetor: 300ex
Air Filter|Box: k and n/stock
Pipe|Silencer: fmf megamax full system
Clutch|Plates: stock
Gearing F|R: 12/38
CDI|Killswitch: stock
Cooling: stock
Other: full skids, did chain, other upgrades to new or newer 300ex parts that arent mentioned

[rollie]

another

[rollie]

After a day of riding

[honda_racer_713]

Chassis | Suspension | Controls:

Frame: Stock w/gussets
A Arms: Burgard +3 +1
Swingarm: Burgard +2
Steering Stem: Stock
Stbilizer:
Axle: Durablue
Carrier: Lonestar
Locknut: Durablue Antifade
Hubs F|R: Stock / Cannondale
Bars: Tag
Throttle/Clutch Lever: RTC
Grips: Renthal
Nerfs: AC
Bumper: AC
Grab Bar: stock
Front Shocks: Elka dual rate w/ rezzies
Rear Shock: Elka SSD w/ rezzie
Brake Lines: Galfer
Rotors F|R: Stock
Rims F|R: ITP/Douglas
Tires F|R: Kenda Klaws



Body:

Plastic: Fullbore
Graphics|Seat Cover: K&K
Number Backgrounds: K&K
Handguards: Powermadd
Bar Pad: Tag
Fuel Tank: Stock



Engine|Drive System:

Cylinder|Head: stock
Bore & Stroke: stock
Displacement: 282
Carburetor: jetted
Air Filter|Box: Uni/Stock
Pipe|Silencer: FMF custom shorty
Clutch|Plates: stock
Gearing F|R: 14/36
CDI|Killswitch: Sunstar Racing/Pro Design
Cooling: stock
Other: Higher shock mounts to accept longer shocks


<a href="http://photobucket.com" target="_blank"><img src="http://i28.photobucket.com/albums/c241/honda713/276737f2.jpg" border="0" alt="Image hosting by Photobucket"></a>

<a href="http://photobucket.com" target="_blank"><img src="http://i28.photobucket.com/albums/c241/honda713/a4688778.jpg" border="0" alt="Image hosting by Photobucket"></a>

<a href="http://photobucket.com" target="_blank"><img src="http://i28.photobucket.com/albums/c241/honda713/3553ceea.jpg" border="0" alt="Image hosting by Photobucket"></a>

<a href="http://photobucket.com" target="_blank"><img src="http://i28.photobucket.com/albums/c241/honda713/3ba60c83.jpg" border="0" alt="Image hosting by Photobucket"></a>

<a href="http://photobucket.com" target="_blank"><img src="http://i28.photobucket.com/albums/c241/honda713/100b5e22.jpg" border="0" alt="Image hosting by Photobucket"></a>
and one of me at southwick
<a href="http://photobucket.com" target="_blank"><img src="http://i28.photobucket.com/albums/c241/honda713/48989b8f.jpg" border="0" alt="Image hosting by Photobucket"></a>

[rollie]

another dont mind the YFZ ( the brigth thing is my registration plate)

[honda_racer_713]

oh yeah im in the process of putting it back together thats why the rezzies are not mounted yet.

[rollie]

rear end

[rollie]

hey kyle i can play the southwick game....lol

me at the wick, the fence got in the way though

[yamablaster24]

Frame:stock Snyder motorsports Gusseted
A Arms:Snyder Motorsports
Swingarm:Phragle Rox suspension
Steering Stem:Stock
Stbilizer:
Axle:Durable +4
Carrier:stock modifed
Locknut:stock
Hubs F|R:Honda 400ex rear, stock front
Bars:Renthal
Throttle/Clutch Lever:Stock
Grips:Spiders won from Good Grades Program
Nerfs:AC racing
Bumper:GYTR
Grab Bar:AC Racing
Front Shocks:Works with Revalve by Phrgale Rox Suspension
Rear Shock:Internals with Custom Spring/valving, and body
Brake Lines:Warrior rear, stock front
Rotors F|R:warrior rear, stock front
Rims F|R:Douglas .190 front, ITP beadlock rear
Tires F|R:Grooved radials front, Holeshot rear



Body:

Plastic:Stock 2005
Graphics|Seat Cover:Ebay Special
Number Backgrounds:
Handguards: d
Bar Pad:Renthal
Fuel Tank:Stock



Engine|Drive System:

Cylinder|Head:Rechambered By SMS
Bore & Stroke:Classified
Displacement:203cc
Carburetor:30mm Keihin
Air Filter|Box:KN, stock
Pipe|Silencer:FMF shortened
Clutch|Plates:Dirt Digger
Gearing F|R:14 front, 40 rear
CDI|Killswitch:Pro Design
Cooling:
Other:Lightened Flywheel, Hot rod crank, Wiseco Pro-lite, head rechambered, MX port/polish, Rear end has over 13" of real travel, 7" of sag.

http://img.photobucket.com/albums/v634/yamablastermx/blaster2-27-05007.jpg

http://img.photobucket.com/albums/v634/yamablastermx/blaster2-27-05008.jpg

http://img.photobucket.com/albums/v634/yamablastermx/blaster2-27-05009.jpg

http://img.photobucket.com/albums/v634/yamablastermx/blaster2-27-05010.jpg

http://img.photobucket.com/albums/v634/yamablastermx/blaster2-27-05011.jpg

[Cody_300ex]

Not to much eye candy but she makes up for it inside....


Chassis | Suspension | Controls:

Frame: Stock
A Arms: GDH Racing +3 Long Travel
Swingarm: Stock
Steering Stem: Stock
Stabilizer: N/a
Axle: Stock
Carrier: Stock
Locknut: Stock
Hubs F|R: Stock
Bars: Factory 909
Throttle/Clutch Lever: Stock PCed\ Moose Racing
Grips: Scott
Nerfs: AC Racing Standard
Bumper: DG Standard
Grab Bar: Stock
Front Shocks: Polished YFZ Stockers
Rear Shock: Custom Axis single rate, Comp & Preload adj.
Brake Lines: Stainless steel
Rotors F|R: Stock
Rims F|R: ITP T-9\ Painted stock for MX\ Douglas .190’s for TT
Tires F|R: Fast Trekker fronts\ Kenda Knarly for MX \ American Racers For TT



Body:

Plastic: Cut OEM 250r White Fronts/ Ufo Red Rears
Graphics|Seat Cover: Ripped Stock
Number Backgrounds: N/A
Handguards: N/A
Bar Pad: Factory 909
Fuel Tank: Stock



Engine|Drive System:

Cylinder|Head: Weisco 11:1 Compression| TC Porting/Polishing, Oversized Valves, 5 angle valve job/ Kibble White H/d Valve springs
Bore & Stroke: 76mm & 65.5mm
Displacement: 298cc
Camshaft: Webcam Stage 3
Carburetor: Modded stock
Air Filter|Box: UNI | Modded Stock
Pipe|Silencer: WB S-bend | HMF Sport
Clutch|Plates: Stock|Stock
Gearing F|R: 15|38
CDI|Killswitch: Ricks | Pro design
Cooling: Air cooled
Other:

[Cody_300ex]

One

[Cody_300ex]

two

[Cody_300ex]

Three

[Cody_300ex]

four- set up for TT

[Cody_300ex]

Five - TT

No way I'll win but I'll try anyway..


2001 Kawasaki Lakota sport
Chassis | Suspension | Controls:

Frame:stock
A Arms:stock
Swingarm:stock
Steering Stem:stock
Stbilizer:stock
Axle:stock
Carrier:stock
Locknut:stock
Hubs F|R:stock
Bars:MOOSE ATV Bend
Throttle/Clutch Lever:modified stock
Grips:Walmart
Nerfs- Kawasaki
Bumper:stock
Grab Bar:stock
Front Shocks:stock
Rear Shock:stock
Brake Lines:stock
Rotors F|R:stock
Rims F|R:ITP Steel
Tires F|R:22"s Dirtdevils



Body:

Plastic:Maier Green Race cut
Graphics|Seat Cover:none
Number Backgrounds:none
Handguards: none
Bar Pad:Moose
Fuel Tank:stock



Engine|Drive System:

Cylinder|Head:stock
Bore & Stroke:stock
Displacement:290cc
Carburetor:stock
Air Filter|Box:Twin Air
Pipe|Silencer:SuperTrapp IDS2
Clutch|Plates: DP Clutches
Gearing F|R:13T front 43 Rear
CDI|Killswitch:stock
Cooling:air
Other:Moose shock covers (not Pictured)

Pics http://www.imagestation.com/picture/sraid166/p647bd29d26c54bbc55aac272b009e31d/f453dcd7.jpg
http://www.imagestation.com/picture/sraid166/pb09163acb079215b2e57724a1ccde659/f453dcd2.jpg
http://www.imagestation.com/picture/sraid187/p53f630aa39496fef5efe20e3d526760d/f23b3960.jpg :macho

[Cody_300ex]

Last TT

[Cody_300ex]

Most Recent Pic (bad one)

[ZeroLogic]

Hell no chance but oh well.

Chassis | Suspension | Controls:

Frame: Stock
A Arms: Stock
Swingarm: Stock
Steering Stem:
Stbilizer: None
Axle: Stock
Carrier: LSR
Locknut: Stock
Hubs F|R: Stock
Bars: Renthal
Throttle/Clutch Lever: Stock
Grips: Oury
Nerfs: Ac racing
Bumper: Dg
Grab Bar: Ac racing
Front Shocks: Stock
Rear Shock: Stock
Brake Lines: Stock
Rotors F|R: Stock
Rims F|R: .190 (not sure what brand)
Tires F|R: .190 (not sure what brand)



Body:

Plastic: Maier Racecuts
Graphics|Seat Cover: Stock
Number Backgrounds: None
Handguards: Aceribs
Bar Pad: Renthal
Fuel Tank: Stock



Engine|Drive System:

Cylinder|Head: All stock but the Wiseco pistion and rings.
Bore & Stroke: .020 (74.5mm) Wiseco pistion.
Displacement: 286cc
Carburetor: Stock
Air Filter|Box: UNI filter Stock airbox
Pipe|Silencer: Curtis Sparks X4
Clutch|Plates: EBC clutch
Gearing F|R: Stock
CDI|Killswitch: Comstum killswich Stock CDI
Cooling: Stock
Other: Pictres are old have different rear tires. A big ol headlight also.
http://i15.photobucket.com/albums/a357/zerologic/front.jpg
http://i15.photobucket.com/albums/a357/zerologic/frontangel.jpg
http://i15.photobucket.com/albums/a357/zerologic/exaustside.jpg
http://i15.photobucket.com/albums/a357/zerologic/assend.jpg
http://i15.photobucket.com/albums/a357/zerologic/exaust1.jpg
http://i15.photobucket.com/albums/a357/zerologic/exaust2.jpg

[bknight]

Chassis | Suspension | Controls:

Frame: Stock pc'ed black
A Arms: stock
Swingarm: Stock pc'ed red +3 longer
Steering Stem: stock
Stbilizer: n/a
Axle: stock
Carrier: stock
Locknut: stock
Hubs F|R: stock
Bars: Fly Racing
Throttle/Clutch Lever: Stock
Grips: Fly Racing
Nerfs: n/a
Bumper: PRM
Grab Bar: PRM
Front Shocks: Works Duel Rates
Rear Shock: Stock
Brake Lines: Motion Pro
Rotors F|R: stock drums
Rims F|R: Douglas
Tires F|R: Skat-Trak



Body:

Plastic: Maier
Graphics|Seat Cover: No Graphics Blaster 2001 Seat Cover
Number Backgrounds: n/a
Handguards: None
Bar Pad: Fly Raceing
Fuel Tank: stock with red tank cover



Engine|Drive System:

Cylinder|Head: HWD Ported Head, and Cylinder, with lightend flywheel
Bore & Stroke: stock
Displacement: 197cc
Carburetor: 34mm carb off a 250r
Air Filter|Box: K&N, stock box
Pipe|Silencer: LRD
Clutch|Plates: SuperK Kevlar Clutch
Gearing F|R: 14 front Stock rear
CDI|Killswitch: stock / none
Cooling: Nothing
Other:

http://bikepics.com/pics/pics/yamaha-blaster-90-bikepics-163154.jpg
http://bikepics.com/pics/pics/yamaha-blaster-90-bikepics-163551.jpg
http://bikepics.com/pics/pics/yamaha-blaster-90-bikepics-163552.jpg
--Alittle Newer--
http://bikepics.com/pics/pics/yamaha-blaster-90-bikepics-431634.jpg

[Livin4Real]

how about anything below 350cc so us miniquad guys can get in on it :D

[TheFontMaster]

Originally posted by Livin4Real
how about anything below 350cc so us miniquad guys can get in on it :D

There was a mini QOTM last year, and I plan on doing another one this year too.

[Sjorge450R]

Originally posted by TheFontMaster
There was a mini QOTM last year, and I plan on doing another one this year too.

how long do i have to get some pictures? I have a bunch of stuff coming in monday and need to get it on.

[TheFontMaster]

Originally posted by Sjorge300EX
how long do i have to get some pictures? I have a bunch of stuff coming in monday and need to get it on.


You have plenty of time. This year's mini QOTM probably won't be untill summer.

[Sjorge450R]

Originally posted by TheFontMaster
You have plenty of time. This year's mini QOTM probably won't be untill summer.

no, I am talking about this contest.

[TheFontMaster]

Originally posted by Sjorge300EX
no, I am talking about this contest.

You have untill the afternoon of Tuesday the 21st.

[BrandonBlackmon]

Here's PBlackmon's warrior..

[Scro]

Wow, I would have already expected the orange Mojave to be in this one.

[BlasterEaten250]

Originally posted by bama450r
Wow, I would have already expected the orange Mojave to be in this one. thats the one i was waiting for, maybe he doesnt come on much:confused:

[BlasterEaten250]

i think there should be a reminder in the sport quads under 350cc section so more people enter.

[kyleschonert]

Chassis | Suspension | Controls:

Frame:Stock
A Arms: Burgard +2+1
Swingarm: Laeger's +2
Steering Stem: Stock with Trail Tech Big Bar adapter. (Billet BABY!)
Stbilizer: Gibson 7-Way Rebuildable
Axle: Lonestart +4
Carrier: RAD H-7
Locknut: RAD LOC
Hubs F|R: Stock
Bars: Pro Taper Contour CR Hi's
Throttle/Clutch Lever: Stock. Magnum Easypull
Grips: Renthal
Nerfs: DG Fat Series
Bumper: DG V-Pro
Grab Bar: DG Fat Series
Front Shocks: Elka Piggyback With Compression Adj.
Rear Shock: PEPs with compression and rebound adj.
Brake Lines: Stock
Rotors F|R: Stock
Rims F|R: Stock, ITP T-9 Baja
Tires F|R: ITP Holeshot MX's, ITP Holeshot MXR4's



Body:

Plastic: Stock Honda Yellow custom race cut
Graphics|Seat Cover: Factory Effex
Number Backgrounds: None
Handguards: None
Bar Pad: Pro Taper
Fuel Tank: Stock



Engine|Drive System:

Cylinder|Head: Port and Polish. (Joe's Offroad Repair of Sumner, Illinois
Bore & Stroke: not sure
Displacement: 330
Carburetor: Stock
Air Filter|Box: K&N, stock
Pipe|Silencer: Curtis Sparks x-4
Clutch|Plates: Stock
Gearing F|R: 14/39
CDI|Killswitch: Unlimited rev box of EBAY. Pro Design
Cooling: None
Other: None

[kyleschonert]

new pictures coming tom. May be dirty though.

[kyleschonert]

last one. Pictures not lookin likely. Gonna be COLD:eek2:

[Elka83]

My Blaster

Chassis | Suspension | Controls:

Frame: Stock, w/ jrd gussets
A Arms: snyder motorsports
Swingarm: storm racing
Steering Stem: lsr
Stbilizer: denton
Axle: rpm
Carrier: lsr
Locknut: rpm
Hubs F|R: lsr banshee hubs
Bars:pro taper
Throttle/Clutch Lever: moose and magura hydro clutch
Grips: spider
Nerfs: propeg
Bumper: dg
Grab Bar: genuine yamaha
Front Shocks: elka
Rear Shock: elka
Brake Lines: streamline
Rotors F|R: stock
Rims F|R: hipers
Tires F|R: maxxis raZr



Body:

Plastic: maier
Graphics|Seat Cover: hbombs
Number Backgrounds: nacs
Handguards: acerbis
Bar Pad:none
Fuel Tank: stock



Engine|Drive System:

Cylinder|Head: PB phANTOM
Bore & Stroke: 200cc
Displacement: 200cc
Carburetor: 30mm
Air Filter|Box: pb box uni
Pipe|Silencer: lrd
Clutch|Plates: 250r
Gearing F|R: stock
CDI|Killswitch: prodesign
Cooling: ...
Other:fasttt


http://i5.photobucket.com/albums/y179/Elka83/CIMG1492.jpg
http://i5.photobucket.com/albums/y179/Elka83/CIMG1491.jpg
http://i5.photobucket.com/albums/y179/Elka83/CIMG1489.jpg
http://i5.photobucket.com/albums/y179/Elka83/CIMG1487.jpg
http://i5.photobucket.com/albums/y179/Elka83/ModifiedTurn2.jpg

[trX250eXmXr28]

post up the nats 300 u got bobby

[yellow400ex05]

I'll give this a shot! Come on guys and girls vote! :macho

Chassis | Suspension | Controls:

Frame: stock
A Arms: stock
Swingarm: stock
Steering Stem: stock
Stabilizer: stock
Axle: stock
Carrier: stock
Locknut: stock
Hubs F|R: stock
Bars: stock
Throttle/Clutch Lever: stock
Grips:stock
Nerfs: stock
Bumper: stock
Grab Bar: stock
Front Shocks: stock
Rear Shock:
Brake Lines: stock
Rotors F|R:stock
Rims F|R: stock
Tires F|R: Maxxis Razr 20 inch.



Body:

Plastic: stock
Graphics|Seat Cover: stock
Number Backgrounds: stock
Handguards: d stock
Bar Pad: stock
Fuel Tank: stock



Engine|Drive System:

Cylinder|Head: stock
Bore & Stroke: stock
Displacement: 229cc
Carburetor: stock
Air Filter|Box: K&N airfilter with outerwears
Pipe|Silencer: HMF polished full system
Clutch|Plates: stock
Gearing F|R: stock
CDI|Killswitch: stock
Cooling: stock
Other:


http://www.imagestation.com/picture/sraid198/p77e4a8aceaa87366b7ad528f8a783951/f0d21a21.jpg

http://www.imagestation.com/picture/sraid198/p8c9f60bbd341afe32018f8e712fee555/f0d219aa.jpg

http://www.imagestation.com/picture/sraid198/pcaf82c665c0aa76b040ee68317933430/f0d2191e.jpg

http://www.imagestation.com/picture/sraid198/p0ca286d5d55b8e77de3929ecef1e3879/f0d217ed.jpg

http://www.imagestation.com/picture/sraid198/p2267365f6899ca50d967f4ae985467f9/f0d218b5.jpg

The tires on back are just my maxxis snow tires but my other tires a 20 inch maxxis Razrs.

[blasteracer24]

Chassis | Suspension | Controls:

Frame: stock
A Arms: asr
Swingarm: stock
Steering Stem: stock
Stbilizer: n/a
Axle: durablue
Carrier: stock
Locknut: durablue
Hubs F|R: stock
Bars: protaper
Throttle/Clutch Lever: motion pro
Grips: renthal
Nerfs: DG
Bumper: DG
Grab Bar: DG
Front Shocks: elka
Rear Shock: 400ex
Brake Lines: Terry cable
Rotors F|R: drums?
Rims F|R: itp
Tires F|R: itp holeshot mxr4's/ mx fortns



Body:

Plastic: maier
Graphics|Seat Cover: projectblaster
Number Backgrounds: nacs
Handguards: acerbis
Bar Pad: taper
Fuel Tank: stock



Engine|Drive System:

Cylinder|Head: Ecp
Bore & Stroke: bigegr
Displacement: less than 200cc's
Carburetor:kaihn
Air Filter|Box: pb aluminum
Pipe|Silencer: phantom
Clutch|Plates: ebc
Gearing F|R: 14/8
CDI|Killswitch:pro design
Cooling: air?
Other: stickers


as it stands
http://i22.photobucket.com/albums/b349/djroofus/PatsPictures.jpg

http://i22.photobucket.com/albums/b349/djroofus/PatsPictures028.jpg

[Lurch]

When is the deadline? I'll have finsihed pics of hte Mojave tomorrow. Is that too late??

[Elka83]

Originally posted by trX250eXmXr28
post up the nats 300 u got bobby

im gonna put the new gfx onm and enter it in the big quad qotm

[drifterx]

Originally posted by Lurch
When is the deadline? I'll have finsihed pics of hte Mojave tomorrow. Is that too late??


Originally posted by TheFontMaster
You have untill the afternoon of Tuesday the 21st.

Go for it Lurch! :)

[countypark]

Here is my 300EX. I have developed this quad over a number of years. It has a custom front and rear suspension that provides nearly 10 inches of wheel travel. Last season I took second overall in the GNCC Sport Class with one win at the John Penton.

This year I will be running the same quad with a few minor modifications. I will be adding Flexx bars and I have coated the engine a cool black color. I'm probably going to get new style Maier plastics after Steele Creek.

Chassis | Suspension | Controls:

Frame: Stock, powder coated, reinforced
A Arms: Action Racing +2 +1 caster and camber adjustable
Swingarm: Stock lengthened 2 inches and powder coated
Steering Stem: Stock and powder coated
Stbilizer: Denton
Axle: Stock
Carrier: Billet Dual Row
Locknut: Stock
Hubs F|R: Stock and powder coated
Bars: Renthal now, Flexx for 2006 season
Throttle/Clutch Lever: Stock
Grips: Renthal medium
Nerfs: AC Racing
Bumper: AC Racing
Grab Bar: AC Racing
Front Shocks: ELKA triple rate with piggybacks
Rear Shock: Custom WP GT Thunder fully adjustable
Brake Lines: SS
Rotors F|R: Stock
Rims F|R: Douglas 4x1 front and Ultimate Beadlock rears
Tires F|R: Maxxis Razor 2

Body:

Plastic: Maier
Graphics|Seat Cover: Gripper
Number Backgrounds: Baldwin
Handguards: Moose
Bar Pad: Renthal
Fuel Tank: stock

Engine|Drive System:

Cylinder|Head: Stock
Bore & Stroke: 90mm Bore stock stroke
Displacement: 330 cc
Carburetor: Stock
Air Filter|Box: Uni
Pipe|Silencer: Supertrapp header MBRP silencer
Clutch|Plates: Stock Honda
Gearing F|R: 14/38
CDI|Killswitch: TC Racing CDI/Pro-Design Kill switch
Cooling: Custom Oil cooler
Other: CPR custom shock mount

[countypark]

Here is a shot from Yadkinville

[countypark]

Here is a shot with the engine painted.

[Lurch]

Chassis | Suspension | Controls:

Frame: 2000 Kawasaki Mojave - Modified
A Arms: Cycle Works Racing (http://www.cycleworksracing.net) +3”+1”
Swingarm: Green Streak Racing +3”
Steering Stem: Pro Performance AntiVibe +1”
Stbilizer: N/A
Axle: Durablue Eliminator +6”
Carrier: Stock
Locknut: Durablue Posi-Lock
Hubs F|R: Stock/Durablue 4x110
Bars: Renthal Fat Bars – CR Hi Bend
Throttle/Clutch Lever: YZ250F Twist / MSR Raptor Pro
Grips: Renthal Medium Compound
Nerfs: AC Racing - Modified
Bumper: AC Racing Stadium – Honda 450R
Grab Bar: AC Racing
Front Shocks: Elka Fully Adjustable
Rear Shock: Stadium Suspension
Brake Lines: Cycle Works Racing (http://www.cycleworksracing.net)
Rotors F|R: Stock
Rims F|R: Douglas .190 / Douglas Ultimate Billet Beadlocks
Tires F|R: Maxxis Razor MX 20x6x10 / 18x10x8

Body:
Plastic: Full Maier Race Plastics – Zest Orange
Graphics|Seat Cover: Ceet Racing Custom
Number Backgrounds: Custom Carbon Fiber Pattern
Handguards: PowerMadd
Bar Pad: None
Fuel Tank: Stock

Engine|Drive System:
Cylinder|Head: Four Stroke Tech (http://www.fourstroketech.net) Port & Flow
Bore & Stroke: No sure
Displacement: 359cc
Carburetor: 2001 YZ250F w/ hot start
Air Filter|Box: K&N Pod / None
Pipe|Silencer: Big Gun / Big Gun
Clutch|Plates: Stock
Gearing F|R: 13/38 or 13/35
CDI|Killswitch: KLR250 / Pro Design
Cooling: Stock Radiator / Engine Ice coolant
Other:

Please ignore the tires. They're still dirty and the new ones haven't arrived yet. Here is the Mojave!

http://www.racewebcreations.com/images/quadrebuild/finished006.jpg
http://www.racewebcreations.com/images/quadrebuild/finished002.jpg
http://www.racewebcreations.com/images/quadrebuild/finished003.jpg
http://www.racewebcreations.com/images/quadrebuild/finished004.jpg
http://www.racewebcreations.com/images/quadrebuild/finished005.jpg

[countypark]

Killer quad.

[racerdude56]

This is my 300ex. I powder coated it myself.

Chassis | Suspension | Controls:

Frame: stock with black powder coat
A Arms: Viper 400ex +2 powder coated black lower and candy apple red upper
Swingarm: stock powder coated candy apple red
Steering Stem: Lonestar chrome stem and candy apple red powder coated anti-vibe clamp
Stbilizer: none
Axle: Lonestar +4
Carrier: Lonestar billet
Locknut: stock
Hubs F|R: 400ex fronts stock rear
Bars: Tag
Throttle/Clutch Lever: stock
Grips: Renthal
Nerfs: DG fat series powder coated black
Bumper: AC powder coated candy apple red
Grab Bar: DG pro series powder coated candy apple red
Front Shocks: Custom length Elka triple rate with rez
Rear Shock: Elka with rez
Brake Lines: Gafler braided front and stock rear
Rotors F|R: stock
Rims F|R: Douglas bead locks front and OMF bead locks rear. All are powder coated black with candy apple red rings.
Tires F|R: Holeshot MX front and MXR4 rear

Body:

Plastic: Maier race cut white
Graphics|Seat Cover: graphics - custom from Goforitgraphics.com and CEET seat cover
Number Backgrounds: Maier
Handguards: none
Bar Pad: none
Fuel Tank: stock

Engine|Drive System:

Cylinder|Head: stock with head porting
Bore & Stroke: 76.0mm X 65.5mm
Displacement: 289cc
Carburetor: 400ex
Air Filter|Box: Twin air foam clamp on with no air box
Pipe|Silencer: FMF Power Core 4
Clutch|Plates: KG
Gearing F|R: 14/38
CDI|Killswitch: +1000 rev CDI and Pro Design killswitch
Cooling: Jag oil cooler
Other: custom grind cam

http://www.jandjracing.com/Dsc_3932.jpg

http://www.jandjracing.com/Dsc_3924.jpg

http://www.jandjracing.com/Dsc_3930.jpg

http://www.jandjracing.com/Dsc_2954.jpg

[zeppelin]

lurch killed it. lmao

[HiperEX]

theres alot of nice quads on here guys good luck to everyone

[holister]

Chassis | Suspension | Controls:

Frame: 1998 stock gusseted
A Arms: burgard +2
Swingarm: burgard +2
Steering Stem: burgard +2
Stbilizer: PEP
Axle: lonstar +2/+4
Carrier: burgard
Locknut: lsr antifade
Hubs F|R: stock
Bars: moose
Throttle/Clutch Lever: fly racing
Grips: oury
Nerfs: ac racing
Bumper: ac racing
Grab Bar: ac racing
Front Shocks: elka dual rate remote rezzies
Rear Shock: works w/ eibach springs
Brake Lines: galfer
Rotors F|R: galfer
Rims F|R: front itp rear itp beadlock
Tires F|R: front holeshots rear turf tamers

Body:

Plastic: maier race cut
Graphics|Seat Cover: verde powersports
Number Backgrounds: none
Handguards: none
Bar Pad: fly racing
Fuel Tank: clarke

Engine|Drive System:

Cylinder|Head: ported polished
Bore & Stroke: .80
Displacement: 289cc
Carburetor: 400ex
Air Filter|Box: K&n outerwaer
Pipe|Silencer: tc racing (supertrapp)
Clutch|Plates: tusk heavy duty
Gearing F|R: 14/34
CDI|Killswitch: rick's motorsports pro design
Cooling: oil cooler
Other: extended footpegs, motor built by norman racing, race cam

[holister]

dont know how to post pics could some one tell me how

[TheFontMaster]

Originally posted by holister
dont know how to post pics could some one tell me how


You can email the pictures to me at thefontmaster06@aol.com Make shure that you email the pics in a file, it makes it easier for me. It might be a couple days untill I can post them, I have been without power since friday morning, and I am at my aunt's house right now on an aincient computer.

[blasteracer24]

Here are some pics of it more together but sitll no pipe.
http://i22.photobucket.com/albums/b349/djroofus/PAts011.jpg

http://i22.photobucket.com/albums/b349/djroofus/PAts008.jpg

http://i22.photobucket.com/albums/b349/djroofus/PAts009.jpg

[Lurch]

Originally posted by zeppelin
lurch killed it. lmao

:D

[rollie]

Better pictures of mine

[rollie]

another

[rollie]

last one

[Rayne]

Chassis | Suspension | Controls:

Frame: stock, modified
A Arms: Diamond Racing
Swingarm: Snyder Motorsports
Steering Stem: Custom modified banshee (comes out to +1)
Stabilizer: Denton (not in pictures)
Axle: Lonestar Racing
Carrier: Lonestar Racing
Locknut: Lonestar Racing
Hubs F|R: Front - Banshee (not in pictures) Rear - stock
Bars: Pro Taper (Renthal’s showen in pictures)
Throttle/Clutch Lever: Throttle - stock, MSR lever
Grips: Spider
Nerfs: DG Propegs (only showen in last picture)
Bumper: Newage
Grab Bar: Stock
Front Shocks: Elka Elite PB36CR
Rear Shock: Elka Elite RR46CR/SSD
Brake Lines: Snyder Motorsports steel braded (not showen in pictures)
Rotors F|R: Stock
Rims F|R: Stock in pictures
Tires F|R: Front Holeshot MX, Rear Holeshot MXR’s



Body:

Plastic: Project Blaster Taurus V2 Front, Project Blaster L.E. Green Plastic
Graphics|Seat Cover: Project Blaster Special Forces graphics
Number Backgrounds: Nac’s Racing
Handguards: n/a
Bar Pad: ProTaper (not in pictures)
Fuel Tank: stock



Engine|Drive System:

Cylinder|Head: Diamond Racing 240cc National Cylinder
Bore & Stroke: 72.5mm x 61mm
Displacement: 252.823cc's (someone correct me if I’m wrong)
Carburetor: Keihin 30mm
Air Filter|Box: Project Blaster Aluminum air box - K&N or UNI Filter
Pipe|Silencer: Project Blaster Phantom
Clutch|Plates: Barnett
Gearing F|R: 14/38
CDI|Killswitch: Pro Design
Cooling: n/a
Other: Nology HotWire & Coil, Project Blaster Hologram Aluminum Air Scoops, Snyder Motorsports Intake Manifold, Pro Design Adjustable Timing plate, VCATV Shock Covers



http://www.vcatv.com/PBpictures/PBblasterpics/rayne05blaster1.jpg
http://www.vcatv.com/PBpictures/PBblasterpics/rayne05blaster10.jpg
http://www.vcatv.com/PBpictures/PBblasterpics/rayne05blaster8.jpg
http://www.motocrosshq.com/DSCF0002.JPG

[xrxmxcx]

yamaha warrior

Chassis | Suspension | Controls:

Frame:stock
A Arms:wicked products +3
Swingarm:stock
Steering Stem:lsr anti-vibe
Stbilizer:gibson
Axle:g-force
Carrier:durablue
Locknut:g-force
Hubs F|R:stock,hiper intergrated
Bars:moose
Throttle/Clutch Lever:rtc
Grips: pro grip
Nerfs:dg
Bumper:dg
Grab Bar:dg
Front Shocks:elka elite's
Rear Shock:raptor
Brake Lines:galfer
Rotors F|R:stock
Rims F|R:front douglas, rear hiper w/intergrated hubs
Tires F|R:holeshot xcr rear, dunlop front



Body:

Plastic:maier custom warrior w/ hood
Graphics|Seat Cover:k&k, cascade
Number Backgrounds:n/a
Handguards:acerbis
Bar Pad:moose
Fuel Tank:stock



Engine|Drive System:

Cylinder|Head:stock
Bore & Stroke:stock
Displacement:348
Carburetor:keihn
Air Filter|Box:stock w/ prodesign setup
Pipe|Silencer:dg, dg
Clutch|Plates:barnett
Gearing F|R:13, 40
CDI|Killswitch:stock
Cooling:n/a
Other:other small mods..

[xrxmxcx]

2

[blaster99]

Chassis | Suspension | Controls:

Frame: stock w/ Megabnlasters gussets
A Arms: sms long travel
Swingarm: Megablasters
Steering Stem: stock
Stbilizer: pep
Axle: lsr axcaliber
Carrier: stock
Locknut: stock
Hubs F|R: stock
Bars: pro taper se
Throttle/Clutch Lever: stock
Grips: renthal
Nerfs: concept 1 customs
Bumper: prm
Grab Bar: ac
Front Shocks: elka tripple rate long travel w/remote rezzys
Rear Shock: daul rate w/ remote rezzys w/ compression adjust and rebound adjust
Brake Lines: stock
Rotors F|R: stock
Rims F|R: itp
Tires F|R: maxxis razor mx



Body:

Plastic: Maier w/ pb front vented z400 hood
Graphics|Seat Cover: verdi seat cover
Number Backgrounds: standard black backrounds
Handguards: none
Bar Pad: pro taper
Fuel Tank: stock



Engine|Drive System:

Cylinder|Head: R.E.P. race porting, R.E.P. race head 14:1 compression
Bore & Stroke: .020 stock stroke
Displacement: 195
Carburetor: R.E.P. race 28 mil. race carb
Air Filter|Box: stock
Pipe|Silencer: fmf fatty w/ power core 2
Clutch|Plates: stock
Gearing F|R: sun star/pbi 14:38
CDI|Killswitch: pro designe
Cooling: stock
Other: small other things


http://img.photobucket.com/albums/v703/blaster99/IMG_0777.jpg
http://img.photobucket.com/albums/v703/blaster99/IMG_0776.jpg

[watts16]

Chassis | Suspension | Controls:

Frame: Stock
A Arms: Stock
Swingarm:Stock
Steering Stem:Stock
Stabilizer:Stock
Axle: Durablue
Carrier: LSR
Locknut: Stock
Hubs F|R: Stock
Bars: Stock
Throttle/Clutch Lever: Stock
Grips: Scott
Nerfs: Homemade :p
Bumper: Sotck
Grab Bar: Stock
Front Shocks: Works w/ rezzies
Rear Shock: Stock
Brake Lines: Stock
Rotors F|R: Stock
Rims F|R: Stock, ITP
Tires F|R: Stock, Holeshot XCTs



Body:

Plastic: Maier Red
Graphics|Seat Cover: Stock
Number Backgrounds: none
Handguards: Maier
Bar Pad: None
Fuel Tank: Stock



Engine|Drive System:

Cylinder|Head: Stock
Bore & Stroke: Stock
Displacement: Stock
Carburetor: Stock
Air Filter|Box: K&N
Pipe|Silencer: Pro circuit T-4
Clutch|Plates: Stock
Gearing F|R: Stock
CDI|Killswitch: Gunnar kill switch

[watts16]

Another

[stivi]

EDIT, TheFontMaster,

Sorry 250r's don't count. This is for the sport class quads, 250ex, 300ex, blaster, warior, etc.

[BaD04WarrioR]

Ok...some guys talked me into it so here ya go...
Chassis | Suspension | Controls:

Frame: Stock(for now)
A Arms: Wicked +2+1
Swingarm: Lonestar
Steering Stem: Roll Design w/ anti-vibe mounts
Stbilizer: N/A (for now)
Axle: Durablue Eliminator 2+2
Carrier: Lonestar
Locknut: Lonestar
Hubs F|R: Stock
Bars: TAG
Throttle/Clutch Lever: Stock(polished or painted)
Grips: SCOTT
Nerfs: AC
Bumper: Pro Elite
Grab Bar: PRM Products
Front Shocks: Works duals w/ rezzies
Rear Shock: Works dual w/ rezzy
Brake Lines: Steel braided
Rotors F|R: SRP
Rims F|R: ITP Bajas(custom powdercoat)/ITP C Series
Tires F|R: ITP HD's/Kenda Bearclaws



Body:

Plastic: Stock(some minor shaving)
Graphics|Seat Cover: Custom
Number Backgrounds: N/A
Handguards: Acerbis
Bar Pad: Roll Design
Fuel Tank: Stock



Engine|Drive System:

Cylinder|Head: Wiseco High-comp piston/rings
Bore & Stroke: .020 over with Alba 400 stroker kit
Displacement: A little over 400(lol)
Carburetor: Edelbrock
Air Filter|Box: UM Aluminum box w/ K&N filter
Pipe|Silencer: WB
Clutch|Plates: Kibblewhite springs/not sure on plates
Gearing F|R: Stock renthals for now(13f 40r)have some others
CDI|Killswitch: SRP CDI(DYNATEK when it's released) Kill switch coming
Cooling: The good ol' Big Bear setup Perma Cool Oil cooler
Other: Lots of polished and painted parts
http://bikepics.com/pics/pics/yamaha-warrior-04-bikepics-456227.jpg
http://bikepics.com/pics/pics/yamaha-warrior-04-bikepics-453325.jpg
http://bikepics.com/pics/pics/yamaha-warrior-04-bikepics-453318.jpg
http://bikepics.com/pics/pics/yamaha-warrior-04-bikepics-440740.jpg
http://bikepics.com/pics/pics/yamaha-warrior-04-bikepics-453323.jpg
http://bikepics.com/pics/pics/yamaha-warrior-04-bikepics-412720.jpg
http://bikepics.com/pics/pics/yamaha-warrior-04-bikepics-412676.jpg

[BlasterEaten250]

Originally posted by BaD04WarrioR
Ok...some guys talked me into it so here ya go...
:o

[TheFontMaster]

I am closing this thread now, no more entries for this month. I won't be around tomorow to set up the poll, and won't have the time to go through all the quads, pick which ones go into the poll, and set up the poll thread. So the poll will be up within the hour.

[TheFontMaster]

A late entry



http://img346.imageshack.us/my.php?image=pict13517uz.jpg

http://img346.imageshack.us/my.php?image=pict13538ks.jpg


http://img331.imageshack.us/my.php?image=pict13480jn.jpg

http://img331.imageshack.us/my.php?image=pict13505hx.jpg

mod list

Chassis | Suspension | Controls:

Frame: 300ex
A Arms: GDH Racing
Swingarm: Stock
Steering Stem: Stock
Stbilizer: none
Axle: lonestar axcalibur
Carrier: lonestar
Locknut: stock
Hubs F|R: stock
Bars: pro taper
Throttle/Clutch Lever: stock
Grips: tag
Nerfs: ac racing
Bumper: ac racing
Grab Bar: ac racing
Front Shocks: elka elite triple rates
Rear Shock: elka elite dual rate
Brake Lines: stock
Rotors F|R: stock
Rims F|R: itp t9 baja
Tires F|R: itp t9 baja



Body:

Plastic: maier
Graphics|Seat Cover: Spastic Designs
Number Backgrounds: Spastic Designs
Handguards: none
Bar Pad: pro taper
Fuel Tank: stock



Engine|Drive System:

Cylinder|Head:
Bore & Stroke:
Displacement: 300cc
Carburetor: Duncan Racing
Air Filter|Box: stock
Pipe|Silencer: TC racing
Clutch|Plates: dirt digger
Gearing F|R: 14 36
CDI|Killswitch: pro armor
Cooling: air cooled
Other: curtis spakrs CDI box, Mxxis Razr MX tires