PDA

View Full Version : 250r parts on a 400EX


Moses440EX
02-12-2006, 10:50 PM
Hello Everybody
I have a sweet deal on some LSR 250r parts which Iam hoping will fit on my ex...does anyone know if the following parts can be used on a 99 ex
Front Elka Triple Rates
A arms
Steering Stem
AC nerfs
Axle
please let me know ASAP boyz
PismoLocal
02-13-2006, 11:30 AM
The shocks and axle will work for sure
underpowered
02-13-2006, 12:16 PM
shocks and axle are easy but axle requires 250r brake parts. the a-arms will fit with some modification. not sure on the other 2 though.
02-13-2006, 01:35 PM
is this from a suzuki 250r? if it is, they might not work as readily as previously mentioned
underpowered
02-13-2006, 01:37 PM
Originally posted by speedyquad
is this from a suzuki 250r? if it is, they might not work as readily as previously mentioned

i would guess it is some Lonestar racing (LSR) parts for a honda 250r, not an LT
hondaboy400ex55
02-13-2006, 05:54 PM
if its a honda 250R then the nerfs should fit

because dont 250r and 400ex have almost the same frame
02-13-2006, 08:02 PM
Originally posted by underpowered
i would guess it is some Lonestar racing (LSR) parts for a honda 250r, not an LT

that was my first thought, then i remembered some of the other questions that are on here...
prepracing
02-13-2006, 08:07 PM
Originally posted by hondaboy400ex55
if its a honda 250R then the nerfs should fit

because dont 250r and 400ex have almost the same frame

No they don't
Moses440EX
02-13-2006, 10:16 PM
The parts iam looking at are honda 250r parts...not sure what year exactly they are...
has anyone ever experimented in trying to put honda 250r parts on a EX>??
and what conclussions have we came too>
the front shocks should work>?>?
the axle should work as long as i have the brake parts off the R>?
the ac nerfs should work because the frames are similar>?
the a arms should mount up with little modifications??
and no conclussion on the steering stem?
any other ideas?
curious george
02-14-2006, 01:55 PM
the stering stem will not fight. it is not worth playing with becuase you have to close up the bottom tierod/stem plate mount. the 400ex mount plate is bigger then the R's so if you get the parts deal you should sell the stem on line and make your money back.