hiper front wheel question

[walty]

can someone post a pics of the hiper whell front in a 4=1 patern
because a bought a set (use) and the guy told me 4=1...but it does look like 3+2 and i feel it is too wide for my ltr-450

can i change a part in my hiper so the wheel become a 4+1???

[bradley300]

just measure it. kinda hard to tell just looking sometimes. anyway, here are 4-1's on my blaster
http://i14.photobucket.com/albums/a308/bradley300/fourwheeler/12hr.jpg

[2000_mx_banshee]

These are 4+1, the rears are 4+5
http://www.bikepics.com/pics/pics/yamaha-banshee-00-bikepics-471125.jpg

http://www.bikepics.com/pics/pics/yamaha-banshee-00-bikepics-471128.jpg

[bradley300]

thats a sweet looking banshee man!

[2000_mx_banshee]

Thanks

[Sjorge450R]

Originally posted by bradley300
just measure it. kinda hard to tell just looking sometimes. anyway, here are 4-1's on my blaster
http://i14.photobucket.com/albums/a308/bradley300/fourwheeler/12hr.jpg


hey bradley, how are those klaws for GNCC type racing. Right now im in a toss up between those and the XCR's. I know that you have run them both on a blaster and these will be on a 300ex so it should be the same. But which ones did you like better?

[JDiablo]

1

[bradley300]

Originally posted by Sjorge300EX
hey bradley, how are those klaws for GNCC type racing. Right now im in a toss up between those and the XCR's. I know that you have run them both on a blaster and these will be on a 300ex so it should be the same. But which ones did you like better?

i like the normal holeshot XC's bette than both. the xcr's dont have quite enuff ground clearance, and i couldnt get the knarly xcrs to spin easy enuff to keep me in the power band. (i was running tireballs at the 12 hours so i had more traction than w/o them, could have been the problem) for fronts, i have runt the razr 2's, klaws and holeshot xc's. for a genearl track, the xc's and klaws felt nearly identical to me, both did well. i think the razr 2's slide too much on hardpack, but in a muddy race, they are the best turning tire i have run

[450Rchaser]

Will Hi per wheels hold up against rock hittin them. There web site says they don't bend like aluminum. If they don't bend they must break.

Originally posted by 450Rchaser
Will Hi per wheels hold up against rock hittin them. There web site says they don't bend like aluminum. If they don't bend they must break.

ya they hold up perfectly, they are the strongest wheel on the market, good luck trying to break one, mine have been through around 20 XC races and a ton of riding, nothing has gone wrong yet