PDA

View Full Version : Heel Guards


400excaleb
02-11-2006, 05:59 PM
I have ac racing standard nerf bars, they don,t have heel guards.
i would like to buy some. i looked at ims ones but it says to buy the pegs to, and they are expensive.
procircuit406ex
02-11-2006, 06:55 PM
and...
400exMO
02-11-2006, 09:54 PM
Do you have stock pegs? If so and you have the ac standard nerfs and want the heel guards as well? If that's the case buy the heelguards mount them up, get longer bolts and busings and mount them up. Later you can get the pegs, believe me good investment.
rummerd
02-11-2006, 09:58 PM
I have the heel guards for AC racings standard nerfs. 40 shipped if you want them.
jason43050
02-12-2006, 05:36 AM
Originally posted by 400excaleb
I have ac racing standard nerf bars, they don,t have heel guards.
i would like to buy some. i looked at ims ones but it says to buy the pegs to, and they are expensive. here is a link to a set of ac pro peg racing knerf bars, the answer to your question has arrived lol
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1,1&item=4612095727&sspagename=STRK%3AMEWA%3AIT
procircuit406ex
02-12-2006, 09:16 AM
if you want to switch nerfs i would go with the dg race pro peg they have heelgaurds and mount to your stock foot peg but yea there kinda expensive......$300
450Rchaser
02-13-2006, 06:19 AM
IMS Roll Design Pegs and heelguards
NacsMXer
02-13-2006, 08:19 AM
Originally posted by 400excaleb
I have ac racing standard nerf bars, they don,t have heel guards.
i would like to buy some. i looked at ims ones but it says to buy the pegs to, and they are expensive.

I'm in the same boat as you. AC standard nerfs that i've been running for years without heelguards... I don't have the IMS pegs, but i'm going to buy the IMS heelguards anyways. There will be a slight gap between the peg and the heelguard so i'm just going to make some spacers for a simple fix. Plus I have 450R footpegs which are a bit wider and come even closer to the heelguard than stock 400EX pegs. You can make the IMS ones fit, just need a little tweaking like anything else.
450Rchaser
02-13-2006, 12:06 PM
yEAH THAT SHOULD WORK. pRO aRMOR MAKES A PEG THAT WILL BOLT ON TO FACTORY FOR ABOUT 30 A POP i THINK
MOTOSPORT.COM