header question?

[jmc400ex02]

What other skip ons besides pro-curuit will work with a pro-curcuit header?

[jmc400ex02]

anybody

[NCexRider]

It's slip on, and I don't think anything other than a pro cicuit silencer will work with it.

[Wandell]

I don't know if this helps, but I have a stock header with a Pro Circut slip on. I would think any of them would work.:confused:

[NacsMXer]

Originally posted by jmc400ex02
What other skip ons besides pro-curuit will work with a pro-curcuit header?

That all depends. Tell me this... does your pro circuit header fit the stock slip on silencer? I am asking because I do not know if it is a stock diameter header or an oversized one made to work as a "full system"

Slip-on silencers will only work with the stock header or a stock-sized aftermarket header.

"Full system" exhausts tend to have oversized header pipes and an oversized inlet on the silencer to accept a larger header.

So to answer your question: If your pro circuit header is stock-sized, then any slip-on will fit. If it is not the stock diameter, then most likely a pro circuit full-system silencer would only fit.

[wolffie]

call up Pro Circuit, or a company that sells PC like rockymountain!