Need ALOT of 400ex parts...

[400exbiggun]

Need ALOT of parts to finish this ex. Prefer you to be kinda local in PA, NJ, NJ, CT, etc becasue shipping might be a ******.
Really only going to be interested if you have pretty much everything i need.
Here is all I need

-bearing carrier
-STOCK front shocks
-STOCK rear shock
-sprocket hub
-airbox


Need all of these parts, please only reply if you can get me a decent number of parts. Really want to guy everything from one person to get it all done with.

[brandon34r]

I have stock front shocks,offer me a price I need to get rid of them

[CTmxyfz]

This is what I have.

-STOCK front shocks
-STOCk rear shock
full Tie rods
motor mounts _ Chrome looking
I have 2 douglas 190 front rims.

Let me know if you are interested.

[Rafikie]

Originally posted by 400exbiggun
Need ALOT of parts to finish this ex. Prefer you to be kinda local in PA, NJ, NJ, CT, etc becasue shipping might be a ******.
Really only going to be interested if you have pretty much everything i need.
Here is all I need
-motor(either full good, blown, spun, frozen, just jug, just head whatever)
-steering stem
-tie rod ENDS
-gas tankgot it
-seat (dont care about cover)
-bearing carrier
-STOCK front shocks
-STOCk rear shock
-complete front braking system I think Ihave all of it
-complete rear braking system
-sprocket hub
-front hubs with bearings and rotors I have brand new front hubs with bearings no rotors
-rear BEADLOCKS ONLYI have 8x8 Douglas beadlocks painted black need touch up or some elbow grease to polish
-front rims, prefer reinforced at least
-motor mountsgot it
-carbgot a stocker w/ extra jets
-airbox


Need all of these parts, please only reply if you can get me a decent number of parts. Really want to guy everything from one person to get it all done with.

[400exbiggun]

Originally posted by CTmxyfz
This is what I have.

-STOCK front shocks
-STOCk rear shock
full Tie rods
motor mounts _ Chrome looking
I have 2 douglas 190 front rims.

Let me know if you are interested.
how much? for all?

[400exbiggun]

Originally posted by Rafikie

how much for all?

[Chino886]

have a cylinder....on stock bore, scratches on sleeve.....$150

also have valve cover, stock piston, stock cam, stock cam chain

[atvsuperfly]

I am in Pa i have a whole quad that you can buy and use it for parts if need to be 1500.00 with title runs

[partyboy300ex]

I have a 426ex motor with 8 hours or porting and polishing JE 11:1 piston Hot Cams stage 2 Hardend Rockers Titiamium Valves and springs Barnett Clutch and it come with a stock carb all wiring and oil tank and what not

I have a custom alluminum airbox for a 400ex with a battery your battery celinode and fuses go in the airbox with the filter. Comes with a UNI air filter also.

The motor runs very very strong pulled 440ex's and a 265r out of corners on flat track and 450 up a hill on motocross.

Only has 5 races on the motor 3 flat track and 2 motocross probley 15 total hours on the motor.

I would like somewhere around 1050 For the motor and everything with it. Over 1200 invested in motor.

let me know

[CTmxyfz]

Originally posted by 400exbiggun
how much? for all?

$150.00 for all plus shipping. I am located in CT. If interested let me know.

[K_Fulk]

Originally posted by 400exbiggun
Need ALOT of parts to finish this ex. Prefer you to be kinda local in PA, NJ, NJ, CT, etc becasue shipping might be a ******.
Really only going to be interested if you have pretty much everything i need.
Here is all I need
-motor(either full good, blown, spun, frozen, just jug, just head whatever)
-steering stem
-tie rod ENDS
-gas tank
-seat (dont care about cover)
-bearing carrier
-STOCK front shocks
-STOCk rear shock
-complete front braking system
-complete rear braking system
-sprocket hub
-front hubs with bearings and rotors
-rear BEADLOCKS ONLY
-front rims, prefer reinforced at least
-motor mounts
-carb
-airbox


Need all of these parts, please only reply if you can get me a decent number of parts. Really want to guy everything from one person to get it all done with.

I have tie rod ends and the locknuts
Front hubs w/ rotors
seat with quadtech cover(2 small tears) and prp seat latch
Front and rear braking system.
Gas Tank
250 shipped for the above stuff.

I also have som itp reinforced wheels, the edges have some bends but they dont cause any vibration while there moving, ill throw in for another $30.

Keep in mind it will cost 50-75 to ship all that stuff together.

[Honda5]

lonestar carrier in very good shape $75
stock carb (your choice of jetting) $65
edelbrock eichner440 carb (like new)$275
gas tank $20
baja rear rims (good shape) $125

[TCRACING425EX]

i have front shocks and carrier. pm me a offer.

[400exbiggun]

Originally posted by Chino886
have a cylinder....on stock bore, scratches on sleeve.....$150

also have valve cover, stock piston, stock cam, stock cam chain
ill get back to you

[400exbiggun]

Originally posted by atvsuperfly
I am in Pa i have a whole quad that you can buy and use it for parts if need to be 1500.00 with title runs
PM me some info, kinda interested but i only have about 800-900 currently, sorry.

[400exbiggun]

Originally posted by partyboy300ex
I have a 426ex motor with 8 hours or porting and polishing JE 11:1 piston Hot Cams stage 2 Hardend Rockers Titiamium Valves and springs Barnett Clutch and it come with a stock carb all wiring and oil tank and what not

I have a custom alluminum airbox for a 400ex with a battery your battery celinode and fuses go in the airbox with the filter. Comes with a UNI air filter also.

The motor runs very very strong pulled 440ex's and a 265r out of corners on flat track and 450 up a hill on motocross.

Only has 5 races on the motor 3 flat track and 2 motocross probley 15 total hours on the motor.

I would like somewhere around 1050 For the motor and everything with it. Over 1200 invested in motor.

let me know
already have a built 465 stroker, looking for a cheap motor, sorry too expensive.

[atvsuperfly]

pro cirut slip on pipe , kenda klaw rear tires , cracked plastic in the front , rear caliper needs rebuild ,

[400exbiggun]

what part of PA, got pics?

[markk]

Check out these items i found looking for myself some of them are great deals.

http://www.exriders.com/vbb/showthread.php?s=&threadid=208511

http://www.exriders.com/vbb/showthread.php?s=&threadid=205493

http://www.exriders.com/vbb/showthread.php?s=&threadid=207774

[400exbiggun]

Got everything, thats still whats left that i need....

[brandon34r]

Originally posted by 400exbiggun
what part of PA, got pics?

central PA,I can get pics of whatever you need

[coryatver]

I have 400ex front shocks. Make an offer
shocks pic (http://www.paatving.com/forums/attachments/FrontShocks%2EJPG)