Dial-A-Jet

[bman9]

Used this also for about a year. Worked good for tuning without opening the carb up. Very easy to install. Take out a screw in your carb bowl, put their screw in. Make hole with included hole maker thing in your intake boot. Then add a zip tie to the bottom of the DAJ and screw it in. Then take the long screw, also the thing that injects the fuel and screw that down through the DAJ and into the intake boot hole you made. Now just attach the hose from the DAJ to the screw in the float bowl. Adjust to where wanted. Add Snorkel to it.

Also there is another way of attaching it directly to the carb, but i didnt do that one.

Included in this is: 1.) The Dial-A-Jet and parts to go along with it. 2.) Modified snorkel (I cut the top where the tube would go and then added the foam to the inside.) 3.) The manual and some info on the DAJ.

$43 and it is yours




http://img.photobucket.com/albums/v612/bman9/Predator/Picture008.jpg



http://img.photobucket.com/albums/v612/bman9/Predator/Picture007.jpg



http://img.photobucket.com/albums/v612/bman9/Predator/Picture006.jpg



http://img.photobucket.com/albums/v612/bman9/Predator/Picture003d.jpg

[bman9]

ttt

[bman9]

bump

[bman9]

to
the
top