how to remove stripped carb screw

[engle_andrew]

i got 3 loose which suckesd one wont come out its badly stripped please help. i guess my floats are stuck we changed frames and my carb steadily leaks gas out of overflow now. pleaseeeeeeeeeeeeee help me..

[400exbirdy]

take a punch, the one with the flat end, make a notch on your striped bolts head, then turn your punch like it was a screwdriver.
you'l have to buy a new bolt after.

good luck:blah:

[brad_400ex]

Id try that, or else i have used a small needle nose vis-grip to break if feel. It worked for me, but the hard part was getting it to grip on the screw because its so small

[jak1389]

i used a dremmel on mine and just used a flat head screw driver to take it off. you make need to cut the head off, take off the cover, and use pliers to unscrew the bolt.

[prepracing]

take dremel or file and make a cut across the screw head so that you can use a flat head screw driver to take it out. Or get one of those craftsman tools that is designed to take out screws with stripped heads

[Eddiesanders250]

hack saw

[FoxRacing81]

needle nose vice grips

[engle_andrew]

im tired of this quad i put 8 gs in it and cant ride it cause floats im going to fix it with some tnt tonight .

[KILLER EX]

use an impact driver

[lonestar13r]

Ah , I went through the same chit, Vice Grips and then replace all of them philips with allen heads ;) -Ethan

[ride_red666]

ya use needle nose vise grips

[needayfz]

jack hammer hahah jk needle nose thats wut i did