NV300ex
01-27-2006, 04:07 PM
ok i'd searched and searched but nothing coudl help me out in my issue.. i'd taken the big headlight off my 300ex and went to walmart and got the two 55 watt 3" lights to mount.. well everything went well except for the wiring.. i'd ground the ground wire but the other one, i tried it with the high beam, and i pop a fuse.. so i put a new fuse and rewire the wire to low beam instead of high beam.. nothing.. well i'd kept on n on and finally it was burnin my wires inside the lights and everything else.
i dont know if i'd gotten a bad set of lights or if im doing a wiring problem. so i took the lights back and im debating on whether to get another set or just stick my big rectangle light back on there.
Figure somebody ran in this issue of popping fuses on this. Maybe im grounding the lights by how im mounting them on the metal bracket .. could that be it? cause i have no idea. sure could appreciate the help
i dont know if i'd gotten a bad set of lights or if im doing a wiring problem. so i took the lights back and im debating on whether to get another set or just stick my big rectangle light back on there.
Figure somebody ran in this issue of popping fuses on this. Maybe im grounding the lights by how im mounting them on the metal bracket .. could that be it? cause i have no idea. sure could appreciate the help