DANVAN
01-22-2006, 05:38 PM
Hello, this E-ton, yukon 150 has started to stall alot. Raising the idle doesnt help
I took the bowl off the bottom of the carb and remove 2 jets for cleaning. This has helped big time in the past with running problems but not this time. It gave it more full thottle power and better throttle response, but it still stalled
Then I replaced a split fuel line which helped a little bit with the stalling.
Doing those two things has it running without stalling but the idle fluctuates from high to low.
When it was stalling it would just cut out without warning.
Any ideas of what to check next. I was wondering about a coil? Is that a coil on the opposite end of the spark plug wire? I cleaned the connection there once and it made it run better.
I took the bowl off the bottom of the carb and remove 2 jets for cleaning. This has helped big time in the past with running problems but not this time. It gave it more full thottle power and better throttle response, but it still stalled
Then I replaced a split fuel line which helped a little bit with the stalling.
Doing those two things has it running without stalling but the idle fluctuates from high to low.
When it was stalling it would just cut out without warning.
Any ideas of what to check next. I was wondering about a coil? Is that a coil on the opposite end of the spark plug wire? I cleaned the connection there once and it made it run better.