Tag x5's

[WheelieMan4]

Ok i was told that Atv low bend and CR high bend are the same height...well my friend got pro taper-atv low bend and i got the x5-cr high bend and mine are very short compared to his. i was hoping that mine would be higher than stock, just like his...but mine are shorter than stock and i dont know y they are so short...is it something with the clamp, or the fact that he has a 450r and i have 400ex?? thanks...

[NacsMXer]

CR Highs are so low because they are intended for the CR dirtbike. Completely different positioning.

[WheelieMan4]

oic, well what bend would u recomend then? thanks

[Ridered416ex]

i got T2's wit CR double high bend thats wat i suggest

[NacsMXer]

Originally posted by Ridered416ex
i got T2's wit CR double high bend thats wat i suggest

I agree, WheelieMan4, you would be more happy with CR Double High's. That, or a Mini bend like what I have now. Pretty much the same height as a CR Double High, but less wide. After using adapter clamps for the larger 1 1/8" fat bars, you get another 3/4" of overall height added on. So I would say with the mini bend, and the clamps, I am a good 1" over stock height. Very comfortable and easy on the lower back.

http://www.imagestation.com/picture/sraid174/pe20e2f01315975fd8e7e13b2d6eb650a/f38ff994.jpg
http://www.imagestation.com/picture/sraid174/p78235a2d3a20aa59a62cca50bb3571a4/f38ff99e.jpg

[WheelieMan4]

im not sure what the bend is called, but its 145mm...its basically like stock, but they feel alot better....