nates raptor project

[killen them all]

hey guys i bought this raptor stock and over the summer i bought a full ti yoshi and nerf stage 1 cam k&N and more little stuf but when i started draging i loved i built it in to a drag bike here is the project starting with it when i got it my dad bought the bumper the day we picked it up so we put it on there

[killen them all]

more pic

[killen them all]

now i have more pic of the hole rebuilding of it but its on my other cumputer the swing arm is in tn getting chromed

[killen them all]

sold the stock and bout this huge 73hp 690cc i have to go get some mothers and all that polished stuff will be blinging and that 73hp is with out spray im going to spray 12hp

[killen them all]

polished my sop a arm i know the lower arm is dented i ored a new and its a lighter a arm

[killen them all]

one more

ps i have so mutch parts getting chromed i forgot what all i sent out and i am painting the frame a candy apple red and the graphics kit is coming off and buy a casecade seat to match

[homer]

That is one sweet ride.

[killen them all]

thanks i got the motor in today in spring the frames getting painted cand apple red

[killen them all]

motor in

[killen them all]

pic2
ps swing arm is getting sent off to get chromed next weeks :D and some smal parts and mtor parts

[Racing Rice]

Nice progress! It's looking great.

[wolffie]

that thing is gorgeous man! im 16 and bought a TLD preddy. all my other buddies had 660's, but i got a sweet deal on this. i plan on doing a carburetor mod www.nicholascycle.com you oughta call them up and see if you can do the same mod for yours. i dont know the specifics, but in an essence, they "bore" the carb out, and really tweek the **** out of it!

i am plannin on decking my quad out as well. i had a thread up on the site earlier, i am going to air brush my quads rear fenders (eventually, lol)

do you drag race in some kind of circuit, or just do recreational stuff? the quad looks mad nice, but i am willing to bet you spent alot of time and money into getting it that way:D looks great though man, keep up the good work!!!

lookin good keep us updated;)

[killen them all]

new carb

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1,1&item=4608837004&sspagename=STRK%3AMEWA%3AIT

[killen them all]

new paddles


http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&viewitem=&rd=1,1&item=4605974965&sspagename=STRK%3AMEWA%3AIT

[killen them all]

i have still alot to do but its getting there i hope ill be done inthe next 2 mounths

[killen them all]

here new paddles and handle bars

[killen them all]

pic still haveabout a grand left to do it here be4 i can ride it

[sixsixzero]

perfectly good raptor has been ruined.

[Evana13]

^^^^ wat in the hell is your problem. that raptor would own what ever the hell you ride. And stfu about 2 strokes nobody likes a punk like you who thinks just cause you think you are all that gives you the right to bash other ppls quads. I am sick and tired of seeing good posts get closed cause of jerkoffs like sixsixzero. If you don't have any thing nice to say don't say anything at all period.

by the way if you entered I would vote for you that rappy owns.

[Mean250r]

Originally posted by sixsixzero
perfectly good raptor has been ruined.

yeah wtf is your prob. and whats that about 2 strokes? i bet you any amount of money a 250r or banshee would make your raptor look like a toy

BTW sick raptor man, i would deff. vote for that. keep it up!

[killen them all]

pic

[killen them all]

here is more

[killen them all]

those vice grips work god in last pic

[killen them all]

:p i am doing my other side of my motor like this to

[killen them all]

last1

[450r51]

Originally posted by Mean250r
yeah wtf is your prob. and whats that about 2 strokes? i bet you any amount of money a 250r or banshee would make your raptor look like a toy

BTW sick raptor man, i would deff. vote for that. keep it up!


if any of you knew this kids past on this website you would not be backing him up. this kid is a loser and has no life. search his other names

whitelakemotors and a bunch of other names.

[Evana13]

^^^^ UMMMMMMMMMM I DON'T GET IT. THIS GUY MAY BE A LOSER BUT HE STILL HAS A PRETTY NICE RAPTOR AND THAT GUY DIDN'T HAVE ANY RIGHT TO DIS IT LIKE THAT.

[Evana13]

nvm this guy is a total jerkoff I read some of his posts under whitelakemotors and he loves to hate on 400exs but most of his posts are under the 400ex board wierd. And why dose he think he can beat a fully modded 250r in a drag race with his craptor lol I take back wat I sead earlier and you are right this kid needs to get a life :mad:

[killen them all]

Originally posted by Evana13
nvm this guy is a total jerkoff I read some of his posts under whitelakemotors and he loves to hate on 400exs but most of his posts are under the 400ex board wierd. And why dose he think he can beat a fully modded 250r in a drag race with his craptor lol I take back wat I sead earlier and you are right this kid needs to get a life :mad:

lol i hate on the honda cuz the honda guys hate on yamaha guys even thow i am trying to find a cheap 250r to build up to trail ride

[Evana13]

instead of hating on each other don't you think it would be smarter to not pay them any attention at all so the stop bashing yamaha's. You should be the bigger person. And get a life

[bradrychlik]

SWEET RAPTOR MAN!!! I JUST BOUGHT ONE, I LOVE THESE THINGS

[killen them all]

just bought a could air intake for it

[wolffie]

join the club:D

[killen them all]

i just hope my carb is not to big cuz the preds carbs ar 42mm and mine is a 48 but i think i cant stratch it out to fit

i think this will help my raptor out a lot cuz the have a real bad air flow with the stock set up and the carbs are to small for the power so i think with the 48mm carb and the intagra cord air intake with the K&N air filter should be a big gain

intake

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=8047225675&rd=1&sspagename=STRK%3AMEWA%3AIT&rd=1

[wolffie]

sounds good! now you're rockin the Lectron carb right? jetting for the intake on a regular carb is a pain in the butt:blah:

you will accelerate much quicker with this setup, but the throttle response is the big benefit!

[killen them all]

Originally posted by wolffie
sounds good! now you're rockin the Lectron carb right? jetting for the intake on a regular carb is a pain in the butt:blah:

you will accelerate much quicker with this setup, but the throttle response is the big benefit!

yep rockin the bigest carb made for the raptor 660 the nice thing is that i can jet the carb by a twist of a screw cuz the lectrons use rods not jets
the only bad thing is that i have to use a twist throttle cuz a thum throttle want open the carb up all the way

[killen them all]

carb (dp 48mm lectron)

[killen them all]

carb

[killen them all]

i cut the fenders sunday

[killen them all]

front

[killen them all]

on it ill get better pic later today

[killen them all]

last 1 till i get more when i take it out side

[killen them all]

pic out side

[killen them all]

more pic out side

[killen them all]

more !!!!!

[killen them all]

:blah:

[killen them all]

:macho

[killen them all]

:devil:

[killen them all]

:mad: needs to get warm out so i can paint the frmae and swing arm

[BigBoreDinosaur]

73hp and still running a single exhaust? Somebody better call Barkers, Craycraft and Kenz and let 'em know to come to this kid for answers...

[killen them all]

Originally posted by BigBoreDinosaur
73hp and still running a single exhaust? Somebody better call Barkers, Craycraft and Kenz and let 'em know to come to this kid for answers... yeah i know i really want a set of barkers but i want to wait for when he come out with his new ones

[Mxjunkie]

ditch them bars :scary:

[killen them all]

lol yeah the bars do look pretty nasty but there the only bars that allow be to turn all the way full bore has this bump on the gas tank that get in the way of the bars when tryin to turn all theway

josh how is your build going you still maken your shee a cheetah

[killen them all]

cold air intake

[killen them all]

more

[killen them all]

last1

[Robin Hood]

Sexy drag beast. :devil:

[killen them all]

this what it will look like when it is painted maybe a lilttle darker thow

[MadDog56]

How many paddles are you running? 10? Single buff or triple? Haulers, extremes or rippers?

Where do you ride at? I'm a MI guy as well and I'd love to see your bike in action.

[killen them all]

Originally posted by MadDog56
How many paddles are you running? 10? Single buff or triple? Haulers, extremes or rippers?

Where do you ride at? I'm a MI guy as well and I'd love to see your bike in action.
i runat silver lake sand dunes and the sand drags and theyare 10 padle extreams triple buff

[Mxjunkie]

Why did you put the filter in path of the tire, its going to get sand in it and go into your motor.....

[killen them all]

Originally posted by Mxjunkie
Why did you put the filter in path of the tire, its going to get sand in it and go into your motor.....

lol yeah its not like that any more i had to cut the pipe down but i wanted to see if it would work be4 i cut it

[z400guy21]

updates?

[killen them all]

ill get some updates but right now its geting painted

[450Rchaser]

I live in TN. We have no dunes. I really wish we did though. I would like to ride them. Nice quad. Looks very strong.

[killen them all]

oil tank

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&ih=008&item=180002695952&rd=1&sspagename=STRK%3AMEWN%3AIT&rd=1

clutch lever

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&ih=013&item=230002342517&rd=1&sspagename=STRK%3AMEWN%3AIT&rd=1

the quad is done now just waiting for ups man and a chain how many leaks do you think i will need

[killen them all]

pic of about 2 mounths ago

[killen them all]

1

[killen them all]

when she is all done i think i am going to sell her but what do you think i could get

[250r4life]

why would you go and do all that just to sell it?

[killen them all]

to buy parts for my car or get a crotch rocket

[250r4life]

lol

[killen them all]

updates have a new exhaust 2

[killen them all]

new exhaust


http://www.planetsand.com/ubbthreads/showflat.php/Cat/0/Number/500720/page/0/fpart/1/vc/1

[killen them all]

updates

[killen them all]

iuhg

[killen them all]

ewr

[killen them all]

dsadare

[killen them all]

plastic in the sun

[killen them all]

rappy and the yz426f

[theTman]

:scary:

[killen them all]

Originally posted by theTman
:scary:

dang thats an old pic but dont junk up my thread just cuz u feel like starting something if you want to insalt me pm me

[theTman]

Originally posted by killen them all
dang thats an old pic but dont junk up my thread just cuz u feel like starting something if you want to insalt me pm me

dont wanna start anything...i found it and thought it was funny so i posted it for other members enjoyment

[killen them all]

w/e keep the thread clean i want to keep it open

[tp300ex]

man ur bike looks awsome! keep up the work i hope to sale my ex for one one day!

[killen them all]

updates

[killen them all]

1

[killen them all]

3

[killen them all]

oh if any of you didnt know what the update is its the brand new mavin shaw hill shooter rear shock i hope to get fronts next mounth

[bigblock10]

how do you like theat pipe at the dunes? you live in MI what part are you from, i am also from MI

[killen them all]

they dont let it in the dunes i have to have it brought up in a truck and im in whitehall