does anyone have a pic of how there fmf pipe mounted by the frame mount

[slamdak8782]

I cant figure out how to mount this thing

[slamdak8782]

someone please post a pic of this
\

[1stR]

On the right side of the bike there is a lower motor mount which is shaped like a triangle. On that mount there are two bolt holes which connect the mount to the frame. The hole towards the rear of the bike is the hole you use to bolt the pipe to. You will need the little black mounts that look something like the mounts on that are connected to the silencer. What you do is get alonger bolt and slide it through the pipe, the black mount and then through the hole in the motor mount, then put the nut on the bolt and tighten it down. If you don't have that black pipe mount you will probably have to get it from Honda.

[slamdak8782]

ok thats what I did I wasnt sure if it was right or not.

[1stR]

Yes that is how its done boss!:D