FMF pipe troubles Please Help

[slamdak8782]

who has had a fmf pipe that has mounts by the motor mount on the 250r. Also I need spings for it and dont know where to get them. Can I order from FMF or use the stock ones from honda please someone help.

[wilkin250r]

For the most part, pipe springs are pipe springs. You can use FMF springs, or stock honda springs, or whatever.

If your springs are kinda worn out, you might want to get new ones. You local dealership or race shop should have them in stock, and they aren't that expensive.

[jas250r]

Wilkin is right about the springs, you can buy moose springs but kind of need to know the length or someone else might know on here. I have a fmf rev pipe and it has a mount down by the front motor mount, and for me it didn't line up at all when mounted with the fmf silencer, so took a piece of 3/16 aluminum and bolted to one of the motor mount bracket bolts (had to use a longer one) and lined it up with the pipe mount, marked and drilled a hole, and bolted it that way

[slamdak8782]

well mine is an sst and it doesnt want to line up and it is leaking. I had a lrd adjustable before and the springs are too short for the fmf.

[Eddiesanders250]

so your switching from a lrd adj. pipe to a fmf?

[slamdak8782]

thats the switch Im doing. eddiesanders

[velocityatv]

The ESR springs are nice. They have a swivel hook in them. One hook is larger than the other too. They seem to be heaver than than others I've used