my project

[rider250ex]

hey i took some pictures of my project tonight. not much to look at but i ordered some houser +3+1 arms, nacs graphics will be on silver laker customs, it will have full motowoz suspension, no link rear end, and a few other goodies

[TheFontMaster]

Sounds like your off to a good start. It should look sick when it's done.:cool:

[Eddiesanders250]

thats going to be a good looking R. What are your ideas for the engine? stock R motor?

That looks to be close to the same color as my cousins frame that just got powdercoated.

[rider250ex]

yea pretty much stock, it cracked a case but i got a new one and its being rebuilt from the ground up with all oem bearings, billet cb bearing holder, billet clutch basket, ported and polished, and bored over. thats the extent of engine mods. im really focusing on suspension right now.

[xrxmxcx]

are you racing neatv for the 06' season


lookin good so far btw..

[rider250ex]

yup. 4-stroke C and most likely open C

[LT250Racer609]

not bad...thats the same color frame mine is

[JDiablo]

Nice,you have to start somewhere bro.

But 4-stroke C?Isn't a R engine going in there?

[LT250Racer609]

you can still run a 2 stroke in the 4 stroke C class

[rider250ex]

thanks for the comments. since the pictures i added ac propeg nerfs with heelguards. also on the way are the houser +3 a-arms, nacs graphics/seat cover/number plate background/and parking brake block off. i am planning on doing it with the blue frame/steering stem, chrome upper a-arms and maybe swing arm, orange lower a-arms/hubs/misc. small things, silver bottom end/levers/and some other things. and silver laker custom plastics with silver nacs graphics and blue nacs seat cover. so basically a blue, silver, orange color scheme.

[xrxmxcx]

Originally posted by LT250Racer609
you can still run a 2 stroke in the 4 stroke C class

nooo you cant

you can run open c, 4 STR0KE c is for 4 STR0KES

:devil:

im bieng serious though..

good luck with her

[rider250ex]

i had all different color trucks in my drive way this week, brown, yellow, white...this week was good. i got my nacs graphics, seat cover, number plate backgrounds, pb block off, billet gas cap, kenda klaws, houser +3+1's, custom Ac propeg with heelguards, and a Paul Turner race pipe. the bottom a-arms are hammertone gray right now but will be pced orange.

http://i17.photobucket.com/albums/b75/dracutrider/6224bdda.jpg

[trx450Rrider]

siiiiiiiiiiiiick niiiiiiiiiiiick

[Tri-valleyracin]

u can race 2 strokes in for stroke c up to 265 and a 4 stroke to 450. its a combinded class so they just called it four stroke c instead of having two differnt classes like 265 c and 450 c.

that r is goin to be nice. 06 neatv is goin to be a sick race year.

[stoled_400_:(]

sexy. :D

[xrxmxcx]

Originally posted by Tri-valleyracin
u can race 2 strokes in for stroke c up to 265 and a 4 stroke to 450. its a combinded class so they just called it four stroke c instead of having two differnt classes like 265 c and 450 c.

that r is goin to be nice. 06 neatv is goin to be a sick race year.

well i didnt know that one:devil: :eek:

[rider250ex]

well i decided to keep the white plastics so i put my graphics on them. didnt put the seat cover on yet but you get the idea. i also have a quad tech naca duct hood coming this week

http://i17.photobucket.com/albums/b75/dracutrider/alphasnow032.jpg

[rider250ex]

dont mind the idiot in the background...he rides a blaster :p

http://i17.photobucket.com/albums/b75/dracutrider/alphasnow031.jpg

[rider250ex]

this is the reason the quad became a project

http://i17.photobucket.com/albums/b75/dracutrider/riden-hy2005136.jpg

[rider250ex]

http://i17.photobucket.com/albums/b75/dracutrider/riden-hy2005137.jpg

[trx250rkid]

:eek:!!!

[xBlaster696]

:( I don't ride a blaster, I own a blaster.

and I won't have it anymore soon, hopefully, maybe..

[dsaint77]

what type of pro pegs are those? I am looking to get some nerfs with heel guards.



Adam

[rider250ex]

dont know what kinda bike they are for. i got them with custom mounts.

[rider250ex]

not much progress, but i took some new pics. im ordering my MOTOWOZ this week.

http://i17.photobucket.com/albums/b75/dracutrider/alphasnow033.jpg

[Lonestar_R]

I had that happen to my counterbalancer.....I din't crack the case that bad but.....it spun the outer race in the case

[Cr85rRida]

get a better pic with the hood on!!!

[rider250ex]

http://i17.photobucket.com/albums/b75/dracutrider/alphasnow034.jpg


dont mind the mess, im building it in my basement

[Cr85rRida]

looks good what hood is that??

[rider250ex]

quadtech naca duct

[trx450Rrider]

so sick nick

[koh0001]

Looks sweet so far. :D

[rider250ex]

so i ordered my full Motowoz suspension. also got in my ESR billet counterbalance holder and billet exhaust flange. also tried my hand at powdercoating. i think it looks pretty decent.

http://i17.photobucket.com/albums/b75/dracutrider/alphasnow035.jpg

[MX300ex]

looks sick man

[trx250rkid]

yeeeaaaah boi

[250-R-250]

Hey check your pm.

I got a ask you about that CB HOLDER

[250-R-250]

I pm'd you back

[Nick110]

Motowoz... I like your style:D

[hondaboy400ex55]

thats goin be a real sick BIKE!

[stoled_400_:(]

your gonna let me ride this ugly piece of junk, right? :D

[rider250ex]

i just got a few more things in, i dont have pics of them yet though because i lost my cable. anyways i got an RPM dominator axle, LSR carrier, LSR antifade, Nacs billet brake stay, 89 clutch update, IMS classic bumper, Nacs water pump cover, my shocks are going to be here before friday, New to me motor (ported by Gt thunder), and hopefully tomorrow my gibson rebuildable stabilizer. now all i need is a grabbar, finish pcing a few parts, and get this thing together for next sunday.

[250r4life]

how did you get those AC pro pegs with the heal guards with custom mounts? i'd really like to have some propegs with heal guards, but not too sure how to swing it as nobody makes 'em that i know of... how'd you end up swinging it?

[rider250ex]

i bought them used how they are...sorry i will try and find the name of the person i bought them from and ask him about them.

[beerock]

those are trx450 nerfs

nice job.

i just hope that frame holds up with +3's on the front...

[250r4life]

how hard is it to get the trx450r nerfs to work on the 250r? you know Bee?

[rider250ex]

i brought my bike to my friends house and started to build it. so far i have the front end on, motor in, and a few other small stuff. the shocks are in and look awsome. i should have it done by thursday or friday depending on when my carb comes in.

http://i17.photobucket.com/albums/b75/dracutrider/alphasnow039.jpg

[stoled_400_:(]

soop ah doop ah. so is the motor in yet?? get more pics, don't taunt me with a pic of a few parts... :-( haha

[stoled_400_:(]

r

[stoled_400_:(]

ugly piece of _ _ _ _ ;-)

[stoled_400_:(]

ouuuuuuuuu what asick quad. :D

[stoled_400_:(]

oooooh yeah. 49.5 inches :devil:

[stoled_400_:(]

hood less.

[stoled_400_:(]

<object width="425" height="350"><param name="movie" value="http://www.youtube.com/v/6lzZ66o2ZIs"></param><embed src="http://www.youtube.com/v/6lzZ66o2ZIs" type="application/x-shockwave-flash" width="600" height="350"></embed></object>

[beerock]

boy you need to get that stamina up!!! nice vid though.

you should try railing those berms with the throttle WOT and let them turn you:D

nice vid though engine sounds good up top

[atvrider696]

I never thought I'd see the day when Nick's bike was done. Looks sick man. Rides even sicker.

Yea, that's me at the end of that vid saying "Hi"

:p nice photos Travis

[rider250ex]

yea i do need to get my stamina up. feels good to be riding though. that was my first time riding in 8 months. the bike is so much better than i expected it would be. i will get some better pics as soon as i put my hood on and clean it up.

[trx250rkid]

nick ur quad came out so sick. it mostly because half of my quad is on there but its all good.

[Eddiesanders250]

nice, nice im lovin the colors

[stoled_400_:(]

better pics?? **** off :blah: lol

[atvrider696]

You need Kizzle to take the pics, he's nasty.

Or if Travis just kept his chin thing... He'd be sicker at photos :D

[250r4life]

so is anybody gunna hook it up and tell me whatcha gotta do to get those 450r nerfs to mount up on the 250r?

[stoled_400_:(]

haha. yea or i could just practice a bit more... lol. and i think the nerfs have different mounting brackets?? nick can tell you probably...

[stoled_400_:(]

see, it looks like theres like a different mounting bracket or somethin........i dunno. nick!! explain for this kid! :)

[atvrider696]

Nick told me back in january. There's custom mounts welded on to fit the 250R frame. He bought them with the mounts off some guy, I think it was on here.

[rider250ex]

they are 450r nerfs, with the mounts cut then rewelded about 1 1/2 inchs foreward so the nerfs would fit through the frame up front. i have a 1 inch foreward stem so it feels really comfortable.

[stoled_400_:(]

this help any more maybe?

[440racer66]

dang that makes me want to build a r

[rider250ex]

all done for now

http://i17.photobucket.com/albums/b75/dracutrider/post-261-1147314033.jpg

[rider250ex]

another

http://i17.photobucket.com/albums/b75/dracutrider/post-261-1147314079.jpg

[rider250ex]

my bike and my friend ronnies 450 after some riding

http://i17.photobucket.com/albums/b75/dracutrider/post-261-1147314140.jpg

[rider250ex]

it was fun but i need a 14t front sproket

http://i17.photobucket.com/albums/b75/dracutrider/post-261-1147312998.jpg

[rider250ex]

last one for now

http://i17.photobucket.com/albums/b75/dracutrider/post-261-1147313305.jpg

[atvrider696]

Looks good Nick, but now you gota make way for my bike.... :blah:

[Mxjunkie]

250rs sound sooo god damn good.....





thats it I'm building one next haha

[Eric_Winkworth]

Congrats on the R, she is a thing of beauty!

Sounds nice!

I always did love two strokes

[rider250ex]

here are 3 good pics of me riding it the other day. im sooo happy i decided to build it up instead of going to a 4-stroke

http://i17.photobucket.com/albums/b75/dracutrider/methuenwithmylove5-27097.jpg

http://i17.photobucket.com/albums/b75/dracutrider/methuenwithmylove5-27157.jpg

http://i17.photobucket.com/albums/b75/dracutrider/methuenwithmylove5-27161.jpg

[koh0001]

Looks sweet!!

[more tea vicar]

Looks good, going so fast ya sleaves blew off.

[spanky101]

looks good man.... i am in a bind... 4 stroke or 2... so hard... but where did u get those shocks? thanks

[rider250ex]

thanks for the comments. ride both and see which you like better. sometimes when we are out riding and i watch my friends on their 450's i sorta want a 4 stroke, but then i start my bike up and realize why i am riding a 2 stroke. as for the shocks they are Motowoz. check them out at motowoz.com. if you talk to jim tell him nick reynolds sent you. hes a real good guy and very nice. he just talks a little fast (if you call him you will understand). i am very pleased with thier quality and performance. plus they are much easier to adjust than companys like axis with the circlips. these have a threaded preload adjuster.

[Mean250r]

i think a saw a vid on youtube of it?

[rider250ex]

yea probably. the first day i had it done my friend too a video of it and put it up there. its in a lil sand pit?

[Mean250r]

Originally posted by rider250ex
yea probably. the first day i had it done my friend too a video of it and put it up there. its in a lil sand pit?

yep, it was haulin *** and throwin some good roost

[stoled_400_:(]

.........here to accept the video credits......... :D lol

[spanky101]

since you have had a couple rides on the shocks.... how do u like em ? thanks

[rider250ex]

I LOVE THEM. i couldnt be happy with them. they are so adjustable. every little adjustment is felt. they came set up almost perfect for me. i can hit whoops in 4th and 5th gear that i could only hit in 3rd before and i can keep on the throttle the whole time with no bucking. the bike will keep a straight line through just about anything. the best way to tell you how i feel about them is that i am 100% sure i will run them on all of my bikes for as long as jim is making them.

[spanky101]

hummmm i am liking the looks and sounds of the performance of these shocks and i am really tempted to get a 250r and whoop some 4 strokes.... it would just take a little getting used to