what are everyones plans for there winter or summer build

[MX300ex]

what are everyones plans

mine are

GDH LT Aarms
Axis LT shocks
Axis rear shock(on the way)
Razr Mx tires all around
Burgard +1 stem
Burgard +1.25 swinger
330 kit
rtc levers
east coast atv graphics kit..
omf beads

probably more

[Sjorge450R]

450r stock heat shield Powdercoated stealth black thanks to pappy

Wiseco High Comp Piston

PRM summit bumper

EBC clutch kit with HD springs

KTM starter switch to replace the stock black starter switch.

and hopefully some new XCR's :D

[BadManOnA400]

total engine rebuild and .450 cam with HD springs and new plastics and tires on the warrior.

[ZeroLogic]

A 3 grand 250r at the end of summer.:ermm:

[reconmaster]

well you see my plans on my project thread

[Tri-valleyracin]

high comp piston, cam, fmf power core 4 full system. shock relocation and works shocks 350x swingarm and shock and go through everything to get it ready for next season. for the z400 laeger a-arms, elka shocks and gusset kit more that i cant think of right now.

[priebo15]

to start financing on a black '06 300ex.. heh heh

[blasteracer24]

Im picking up my motor from having a little work doen to it, a bigger carb, projectblaster airbox, chains and sprockets, mxr4's, mx fronts, i painted my frame and asr a-arms, did the electrical and plastics.

[Honda TRX250ex]

get the rest of my quad done than save up some money and start on a 426ex for next winter:macho

[Ineedaex00]

Where can i purchase some GDH lt a-arms? And who else makes lt. a-arms for a 250x or 300 ex?

[Sjorge450R]

Originally posted by Ineedaex00
Where can i purchase some GDH lt a-arms? And who else makes lt. a-arms for a 250x or 300 ex?

Burgard, American Star Racing.

[ZeroLogic]

Originally posted by Sjorge300EX
Burgard, American Star Racing.

I thought those companies don't make LT a amrs...

[Sjorge450R]

Originally posted by ZeroLogic
I thought those companies don't make LT a amrs...

i didnt know he was talking LT but American Star Racing does make LT arms for the 300ex.

www.thequadpartsguy.com

[Cody_300ex]

You can contact the owner of GDH Racing at THSFGA on Aim.

My motors getting a little go-go juice, and possibly new plastics.

[drifterx]

Planning on Burguard +2's, but probably +3's, tusk +4 axle, works triples fronts, and works dual rear. Plus maybe a cam, hardened rockers, stiffer valve springs, and a higher comp piston.

[MX300ex]

Originally posted by ZeroLogic
I thought those companies don't make LT a amrs...

burgard makes Lts

[kyleschonert]

250R hood
revalve shocks and convert to zps
T-9 Baja rims for the front
fat bars
handguards
powder coat frame
cam, stiffer valve springs, valves, diff. carb
Maier low profile rear fenders
new front bumper

[fastex91]

300cc hi comp. piston, cam, crank, ported head, new fullbore front plastic, yfz front shocks, '05 raptor rear shock, G force extended axle, OMF rear beadlocks, new powder coat swinger, powder coated side case covers, a arms, tie rods and other misc parts.
The boy should have a rip snortin' scoot in about a month. I'm having all of the reverse gears and all assorted junk taken out of the motor also.

[Mud Goat]

Mine involve a truck. I plan on rebuilding the hole motor, with a
cam, flat-top pistons, holley 4 barrel, and headers.
The only plans for my quad are to put a cam in it some day, but im kinda broke from building this truck.

[300ex73]

Well, here's a few plans of mine.

New parts-
chassis
a-arms
swingarm
axle
steering stem
handlebars
As well as some custom pieces I'm working on fabricating.

Also gonna do some color changes, and hopefully have my graphics kit ready for printing pretty soon.

But, as for the new parts I'll be getting, it means that the current parts I have will be up for sale.

Burgards +5 Long Travel front end (extra balljoints and bushings)
Lonestar steering stem (stock height, zero offset)
Pro Taper Taperwall handlebars, Pastrana FMX bend (works great with the aftermarket stem)
Lonestar axle, axle carrier, and anti-fade brake hub with Moose Racing brake rotor

[300ex_#387]

Most of this is what I have already done this winter...but there are a few things im still working on:

Durablue axle, lonestar carrier, get my swingarm and a arms painted, ITP baja rims, raptor rear shock, Magura fat bars.

Hopefully pretty soon ill get some of these parts:

New tamers, new razr mx fonts, maybe a new bumper, 400ex carb. and 400ex spindles.

[250rider1]

uh for the 250r maybe get it runnin first and then after that paint the nerfs becuz the mounts are startin to rust and thats the only part that isnt painted. maybe new a arms and shocks. for the 250ex, get it painted up and cleaned up a little so i can sell it and get a cr125. and for the truck, some tires and get the rest of the sound system installed. maybe off road lights and a bull bar.

[300ex mxracer]

in the process of putting it all back together-

PC'ed frame-black
PC'ed swinger-black
400ex ASR +2 mx a arms
new chain and sprockets
400ex works triple rate w/o rezzies
11.1 piston
bore out to .040
twist throttle
some other little stuff im forgeting

[hard one]

I have just got this really nice paying job and have alot of money to throw into some thing.


I am going to take the engine out of my 02' 300ex and swap it with a cr 250r cr 500 or a xr 650 engine. wich ever i can get the most power out of or will fit in with out puting to much into engine mounts. then do a custom front end with z 400 or predator shocks.
then i am going to go by a 06 suzuki 450r and use that to race with and keep the ex as a practice bike.

Does anybody know if the races at st. joe state park are any good:D

Hard one

trx 300ex
RM 125 ,reeds and bars

[300ex_#387]

Originally posted by hard one
I have just got this really nice paying job and have alot of money to throw into some thing.


I am going to take the engine out of my 02' 300ex and swap it with a cr 250r cr 500 or a xr 650 engine. wich ever i can get the most power out of or will fit in with out puting to much into engine mounts. then do a custom front end with z 400 or predator shocks.
then i am going to go by a 06 suzuki 450r and use that to race with and keep the ex as a practice bike.

Does anybody know if the races at st. joe state park are any good:D

Hard one

trx 300ex
RM 125 ,reeds and bars

I didnt know they had races at St. Joe State Park.....Instead of swapping engines in your 300 your prolly better off just putting money into suspension and motor work, or just put it into the Lt 450.

[hard one]

the races are mainly for dirt bikes but they have a few classes in the summer for quads (four stroke stock, moddified, two stroke ). I read about it on the missouri state parks web page. I have a friend that raced the dirt bike hair scramble a long time ago and he said it was difficult.

[bustedknuckle]

Hey does anyone no if 250r hood scoops fits on a 300ex

[300ex mxracer]

maier, featherlite, other brands im forgetting. most 250r hoods will work with a little trimming

[300ex mxracer]

http://www.exriders.com/vbb/showthread.php?s=&threadid=201447&highlight=250r+hood+on+300ex

[TarheelRedRider]

Im in the middle of a 390 bigbore. I cant wait till I have it all back together.