May part out Houser YZ426 hybrid. Checking interest.

[WKY400EX]

Here is an updated list of parts I still have.

*All prices are OBO, and I can take Paypal.

*RPM Dominator 250R/400EX +4 axle (very good shape) -$250
*Turf Tamer 18x9.5x8 rear tires on 8" Douglas dual reinforcing ring race wheels -$200
*MX grooved front radials on Douglas 10" beadlock fronts -$200
*400EX front & rear hubs- $100
*Renthal 400EX bend bars w/Renthal grips -$25
*Maier 250R silver race cut fenders w/black smoothie hood & tank cover -$200
*250R seat pan w/new foam, new CEET gripper seat cover & new PRP seat latch -$125
*DG 400EX alloy front bumper -$45
*AC mx grab bar -$30
*250R OEM gas tank w/petcock & hardware -$35
*D.I.D. o-ring chain -$40
*Plus many other small parts. If you need it, ask me and I may have it.

Everything has been garage kept and is in very good condition. If you have any questions, please feel free to PM me, or email me at: wc426mx@hotmail.com and ask.

Thanks,
Bryan

[MX300ex]

post pics

[300ex_#387]

I might be interested in the rear rims and turf tamers. I need to see pics though.

[WKY400EX]

I've been a little busy lately, but I'll get some pictures and post them in the next day or so. Like I said earlier, I'll post prices if there is a lot of interest. Thanks!

[Brewer48]

How much for the motor, carb, exhaust, radiator, and wiring??

[hontrx265r]

Interested in the frame, and swingarm, please email me at mgsytsma@gmail.com

[WKY400EX]

I believe I've replied to everyone's PM's. If I missed someone, please let me know. BTW, I didn't know my inbox was full earlier. If you tried to contact me, try again, because my inbox is empty now. Thanks.

[ONEBAD400]

sent you a pm
pics?

[WKY400EX]

I've posted some prices for the parts now. I'll get some new pics of the quad this afternoon and post them later tonight. Thanks.

[Quadrcr716]

send me pics of the 400ex spindles, rotors, calipers and the silver race cut plastic to FatLr9@aol.com are these prices shipped

[WKY400EX]

Didn't have my digital camera last night, so I wasn't able to get pics. I will tonight, and I'll post them as soon as I get back from the garage. Thanks for the patience.

[WKY400EX]

Here are some pics I took this afternoon. Quad is still assembled. I'll sell the entire quad or part out.
http://www.imagestation.com/picture/sraid200/p4d31fa751f4bf9474796bfbf7cd661f4/f083cef4.jpg http://www.imagestation.com/picture/sraid200/p1f54b300148c986705446a8181431a74/f083cee7.jpg http://www.imagestation.com/picture/sraid200/p7a195c260776a8449d2d70f0e2155bb9/f083cee1.jpg http://www.imagestation.com/picture/sraid200/p738adc4fd201d6e079c05fc711dc998d/f083ced7.jpg http://www.imagestation.com/picture/sraid200/p2724a5b9d146b7f862784243069cf5b0/f083ceca.jpg http://www.imagestation.com/picture/sraid200/p9f8d1a59f55377819d92f653145cd230/f083cebf.jpg http://www.imagestation.com/picture/sraid200/p3c02d75904c3409d2f31f407e52da9df/f083ceba.jpg http://www.imagestation.com/picture/sraid200/p8e0c851fc33acfa76b5166fbcc58fd19/f083ceb1.jpg http://www.imagestation.com/picture/sraid200/pc54ed6a595be014190c3bc1a2ef657c0/f083cea6.jpg http://www.imagestation.com/picture/sraid200/p5bfb89ae9eaf03de92e211fac439d3ec/f083ce9d.jpg http://www.imagestation.com/picture/sraid200/p8bdbd18532e2fdea65b69275ae94eee2/f083ce94.jpg http://www.imagestation.com/picture/sraid200/p705fd91ffaa6f965012700ab86ee9923/f083ce8b.jpg http://www.imagestation.com/picture/sraid200/pefbdc5def343e7b5c7bf9875780cb522/f083ce83.jpg http://www.imagestation.com/picture/sraid200/p63a5501515a57ad5f6dccf8cb2f6b7ca/f083ce7c.jpg http://www.imagestation.com/picture/sraid200/p3b70771a5a24cb2a4c0d3ed0c32276dc/f083ce75.jpg

[kicker696]

how much for the frame, subframe, swing arm, rear shock, propegs, engine, all electronics, exaust, and carb?

[WKY400EX]

kicker696, you have a PM.

[ja426ex19]

hey man i really need the exhaust ill give you 200 for all of it cash in hand i am in tn so it would be a quick 200!!! will it fit an ex frame ?

[WKY400EX]

Originally posted by ja426ex19
hey man i really need the exhaust ill give you 200 for all of it cash in hand i am in tn so it would be a quick 200!!! will it fit an ex frame ? Not sure if it would fit an EX frame. It would probably be close, but some modifications may need to be made.

[set2crash67]

sent u a pm

[Ripitupfilms]

ill buy the uni filter right now

[elbine69]

Can you get some better pics of those air scoops? thanks

[xrxmxcx]

i might buy the exhaust, i have the exact same frame, and motor, so itd mount up mint

pm me a price shipped to 01001

[400exmkt]

Pics of the houser stem and clamp, Price with shipping to 75860

[WKY400EX]

I've been away from the computer the past couple of days, so I apologize for any late replies. I believe I have PM'd and emailed everyone back. If I have missed someone by accident, please let me know. I will work on getting more pics for those who asked. BTW, at the moment, everything is still up for sale.

hey,

how much for your carb? it has hot start right?

Thanks,
Cam #21

p.s. your pm box is full, but give me a pm back

[Ripitupfilms]

i want the filter i dont think you pmed me

[WKY400EX]

ttt

Updated parts list. Still have many things for sale.

carb?

[wicked265R]

I've got a freshly rebuilt set of PEP tripple rate Long Travel front shocks and a custom axis rear shock I'd trade you for the motor

[WKY400EX]

ttt

bodia21 & wicked265R have PM's.

[jrlj]

you have a PM

[gump]

your inbox is full again.. i really need a stem if you still have it

[crombie6guy]

wicked I want those shocks pics to crombie6guy@yahoo.com plus give me weight and stuff for them and cost with shipping to 18969

[WKY400EX]

ttt

[G Impala 63n70]

I PMEd you

[jrlj]

you have a pm

[WKY400EX]

PM's sent. bump

[MX300ex]

seperate radials?

[WKY400EX]

MX300ex, you have a PM.

[WKY400EX]

ttt

[jrspawn]

Hey, please give me a call at 1-302-750-0039, im interested in the motor setup.

thank you
jusitn

[WKY400EX]

BUMP

jrspawn, you have a PM.

[WKY400EX]

bump

Parts still for sale.

[jrspawn]

PLEASE CALL ME AT 1-302-750-0039!!!! I NEED AN ENGINE AND A TC PIPE SETUP, I NEED AT LEAST THE TC MIDPIPE ASAP!!!!!!!

JUSTIN

[camsdad]

if anyone is considering purchasing any of these parts.......i purchased a-arms,shocks,steering stem,radiator,rotors..all items were shipped promptly and better than described...i highly rceommend and would do business again...thanks

[jrspawn]

How did you get a hold of him? Im in need of a good bit of stuff from him, but cant get a hold of him. PM me if you might have his number or something like that.

thank you
justin
jrspawn@aol.com

[WKY400EX]

jrspawn, I've been away from the computer for a couple of days, but I did get your messages. You also have a PM.

camsdad, thank you for the positive feedback. I'm glad you are happy with the parts. I'll get back to you on the package deal you asked about.

[sampson47]

Do you still have the oil tank?? Do you have any pictures?? Thanks.

[WKY400EX]

sampson47, I do still have the oil tank. I can get pics of it if you're interested. Let me have your email address, and I'll send them to you. Thanks.

[sampson47]

Thanks for the reply. My email is chadparis22@hotmail.com. For some reason I cant receive pm's, so the best way is to communicate through email. Thanks.:)

[jrspawn]

Hey, ive managed to loos your number. Please give me a call at 1-302-750-0039, id like to buy the engine setup and exhaust.

Thank you
justin
jrspawn@aol.com

[times2]

i'm interested in wheels, tires, exhaust, caliper, brake lines, airbox(Maybe), wet sump kit (maybe)

I am located near bowling green, do you go to WKU? I just traded for a hybrid today. I would be intersted in the chassis and engine and everything you have left if you would trade it to a little truck.

[WKY400EX]

jrspawn, I'm not able to call you at the moment, but I emailed you my telephone number. Call whenever you'd like.

times2, you've got a PM.

UPDATED PARTS LIST

[wicked265R]

still have the frame? let me know on a price

[EX_Junkie]

If no one else has got the exhaust i'll take it as soon as i get your paypal if u will do 200 shipped. Let me know been looking for one since november. Crushed mine and i'm not paying the crook at tc 525.00 for something i have to make fit.

Thanks
Justin

would that tc pipe fit on a 450r motor

would that tc pipe fit on a 450r motor

would that tc pipe fit on a 450r motor

[wicked265R]

the header wont fit on a 450r motor but the silencer might with some fab.

how much for the tc silencer

[wicked265R]

If fireworks doesnt take the pipe, shoot me a price.

And would you take 25$shipped for the oil tank? Also, were you running just the oil tank with no oil cooler? I just want to get this right the first time.

how much for the silencer?

[EX_Junkie]

Still want the exhaust. Let me know. I really need to get my quad going.

Thanks
Justin

[WKY400EX]

Hey everyone, I haven't had a chance to get on EXriders.com until now. I have an update list of parts on the front page. Anyone interested in any of the parts I have left, please feel free to PM me, or email me at: bcstine@bellsouth.net.

Thanks!

[redrider311]

hey man my clutch cable just snapped today.. i was wondering if you still had yours around? ill send ya a pm...

thanks,
mark

[WKY400EX]

ttt

[87250rxrider]

still have the oil tank?? does it come with all needed lines, etc. i also have a yz426 hybrid and i need to install an extermal oil tank, so i'm wondering if this tank includes lines, etc to just connect everything and be ready to go.
thanks,
-Ryan

[bruce486]

Do you still have the front tires and rims? Pm me.

[OUEL#41]

Do you still have a lsr 400ex axle?

[WKY400EX]

87250rxrider, bruce486, and OUEL#41, you have PMs.

you have a pm

[WKY400EX]

TTT. Several parts are still for sale, and they really need to go. Make me an offer if you're interested in anything. Thanks.

[xrxmxcx]

still have any tires and wheels left?

[WKY400EX]

Yes. Everything listed on the first page of the thread is still for sale.

[hontrx265r]

Where is the tracking number/or email or something about the wetsump I purchased two weeks ago?

[sprtrx300ex]

interested in axle, you have a PM

hey dudes. i have a check already out for the motor so its like sold. this is that getdrunk1990@yahoo.com person

gess who it blue450yo

[hontrx265r]

Does anyone have this guys phone number, I purchased a wetsump kit over two weeks ago. paypal'd he said he would get it out and I have heard absolutely nothing since. Only lives three states away. I've emailed pm'd etc... and nothing! Anyone?

[WKY400EX]

Originally posted by hontrx265r
Where is the tracking number/or email or something about the wetsump I purchased two weeks ago? I emailed you about the kit. With school and work, everyday is covered uip. I haven't had the time to get it shipped out. I apologize.

[WKY400EX]

Originally posted by LCD
hey dudes. i have a check already out for the motor so its like sold. this is that getdrunk1990@yahoo.com person

gess who it blue450yo I recieved the check for the engine today. It is sold. Thanks.

[WKY400EX]

ttt

[DanTheMan]

front shocks for sale?

[YZ400EX]

what about the frame and swinger?? Still for sale??

[WKY400EX]

Front shocks are sold. Frame/subframe/swingarm are still for sale. Thanks.

[YZ400EX]

send me some pics of the frame and swinger to woodcand@gmail.com I am VERY interested..Thanks

[WKY400EX]

YZ400EX, you have a PM.

[jrspawn]

hey, give me a call sometime about your stuff for sale, i might be interested in buying all of it.

Thank you
Justin
jrspawn@aol.com

[elementryder]

do you still have the frame if so pm atvracer9m with a price

[WKY400EX]

ttt

I think I've emailed or PM'd everyone that asked me to. If not, please let me know. I've been out of town, and away from my computer for a while. Thanks!

[atownswhizkid]

What parts do you have left from your hybrid.

[jrspawn]

Hey, price on the whole package? Also are you sure thats a houser chasis? Ive been looking at the pics, and at pics of my old houser 426, and the frame and subframe look nothing alike, they are totally different. Kinda wierd? Do you know what year the frame is or if its a conversion?

[BuiltBlaster88]

Got a radiator for sale? Looks like a pwr in the pics...I need it.

[WKY400EX]

Originally posted by atownswhizkid
What parts do you have left from your hybrid. Everything I have left is listed in my first post on the first page.

[WKY400EX]

Originally posted by jrspawn
Hey, price on the whole package? Also are you sure thats a houser chasis? Ive been looking at the pics, and at pics of my old houser 426, and the frame and subframe look nothing alike, they are totally different. Kinda wierd? Do you know what year the frame is or if its a conversion? It's a Houser frame. I'm not sure on the date the frame was made. I do know that a few things were changed on the later hybrid frames.

[WKY400EX]

TTT

Updated parts list on Page 1.

[WKY400EX]

ttt

[pamelor]

I know this thread is old, but I was just wondering if you still had the frame.
Thanks

Got that Air box still?

[WKY400EX]

Sorry, the frame and the airbox are sold.

Here is an updated list of parts:

*RPM Dominator 250R/400EX +4 axle (very good shape) -$250
*Turf Tamer 18x9.5x8 rear tires on 8" Douglas dual reinforcing ring race wheels -$200
*MX grooved front radials on Douglas 10" beadlock fronts -$200
*400EX front & rear hubs- $100
*Renthal 400EX bend bars w/Renthal grips -$25
*Maier 250R silver race cut fenders w/black smoothie hood & tank cover -$200
*250R seat pan w/new foam, new CEET gripper seat cover & new PRP seat latch -$125
*DG 400EX alloy front bumper -$45
*AC mx grab bar -$30
*250R OEM gas tank w/petcock & hardware -$35
*D.I.D. o-ring chain -$40
*Plus many other small parts. If you need it, ask me and I may have it.

**All prices are OBO! These parts are in good shape, and need to go!

If you have any questions, please feel free to email me at: wc426mx@hotmail.com. Thanks.

[joallen001]

Do you have the airbox setup? Also what about the radiator?

[WKY400EX]

Airbox and radiator are sold. Thanks.