PDA

View Full Version : This has probly been asked alot



MAD450r
01-10-2006, 12:27 PM
Will my 400ex's lonestar +2 arms and elka's fit a 250r and work properly?
Also will the rear shock work as well as the +4 lonestar axle. A guy wanted to trade for my 416ex, but his has stock suspension. i'd consider the trade if all my components will fit and work ok.

Dave83
01-10-2006, 07:28 PM
The a arms will work,but you need to put spacers on each side of the pivot bushings.The EX arm is about 1/4" narrower at the pivots.Shocks will work great,axle will work,but you would need the EX hubs to go with it.Ive seen R rear shocks on ex linkages with some mods to the linkage bushings.

MAD450r
01-11-2006, 05:26 AM
I'll have to talk to the guy again. Then get both atv's together and see if we can swap out my aftermarket setup, for his stock setup.

His motor rips its got alot into it. He just never did suspension.

MAD450r
01-12-2006, 05:34 AM
bump

Dave83
01-12-2006, 06:24 AM
To put the R arms on the EX youll have to trim the mounts on the arms to get them to fit the frame mounts on the 400.