new bars ?? (key)

[widesol]

Anyone have pictures of where you relocated the ignition after you put some bars on ?? and the light

i have a 2005 TRX450

Need ideas

THANKS

[Pvt. Maggot]

Just mount the key somewhere in your plastic that is reachable, use a hole saw and clean up the plastic after with a light flame, make sure not to melt your plastic, Try a search you might find some info. Goodluck :)

[wanta450]

mount it on the plastic below your gas tank that is part of the front fenders

[mike nash]

Zip ty under your hood so you can see light and just leave the key on.

[Sjorge450R]

this is where i put it on my 300ex and i havent had any problems.

[bwamos]

I rewired my ignition so that it uses the old thumb kill switch for an on/off switch. I use a tether kill.

I also have Trail-Tech lights, so I replaced the reg/green indicator bulbs with a red and green waterproof LED's mounted in 2 small holes I drilled in my bar clamp/light mount. ;)

[TRX23rider]

i got one of these for my 400 but it hasent come in yet so i dont have any pics. when i get on ill show you some pics of it.

http://www.trailtech.net/trx450.htm

[Sjorge450R]

Originally posted by bwamos
I rewired my ignition so that it uses the old thumb kill switch for an on/off switch. I use a tether kill.

I also have Trail-Tech lights, so I replaced the reg/green indicator bulbs with a red and green waterproof LED's mounted in 2 small holes I drilled in my bar clamp/light mount. ;)

i have a KTM kill switch that i am going to be using in place of my black starter box and i am just wondering how you worked the wiring. It would probaly better if you were to PM me. Thanks

[cb450r]

This is where i mounted mine. I have been running this in the woods for about a year with no problems....
http://i30.photobucket.com/albums/c306/cb450r/key.jpg

[jmarion]

I mounted mine on the other side and a little lower. It has worked well for the past 8 months and 9 hare scrambles. I mounted the temp light on the brake line with a zip tie. I first mounted it flush on the top of the stock hood but it was hard to see. This location seems to work better.

[jmarion]

Here is the temp light location.

[jmarion]

cb450r -- who did your graphics? Do you have a picture of the whole bike?

[Shawn H]

Looks like the Elsinore kit from Duncan racing

[cb450r]

One Industries "Elsinore" graphics kit..
I got mine through Golden West cycle.
They are classic looking and i love them. I won't be changing them any time soon.
http://i30.photobucket.com/albums/c306/cb450r/450fox.jpg

[Shawn H]

Thats right.

I guessed I knew it was 1 of them too lol.