PDA

View Full Version : tail light pigtail



beany
01-09-2006, 05:20 PM
I was wondering if anyone else has had this misfortune. I broke my taillight off and when this happened if wrecked the pigtail for the tailight. It looks like an automative three wire plug, but I'm not totally sure of that. I thiink there is a different way to get this other the a whole wiring harness through honda, or hardwiring the tail light in. If anyones knows of where else i might be able to find this pigtail please let me know. Thanks. BTW i think the '05's are the same with the LED tail light???

beany
01-11-2006, 02:15 PM
Well since I don't seem to be getting anywhere with the pigtail question. Can someone take a look at thier tail light and tell me where the wires go? Color and position center,left, right and which way your looking at it so i know which is your left,right?? Thanks alot

eastside 400
01-11-2006, 02:57 PM
im not totally sure about your question, but i have a 450r tail light on ebay right now check it out, sorry i couldnt answer your question tho

http://cgi.ebay.com/ebaymotors/Honda-450R-tail-light-take-off-from-2005_W0QQcmdZViewItemQQcategoryZ43980QQitemZ460337 7455QQrdZ1QQsspagenameZWDVW

beany
01-11-2006, 09:53 PM
What I really would like is the pigtail into the tail light!!!!! There are three wires i need to know which wire goes to which pin on th tail light. I need orientation of how your looking at the plug when you tell me which color wire goes where. Example when looking from the back side of the bike, red on the left, green center, and blue on the right. Don't remeber the colors of the wires just using that to make my question more clear. Thanks all

01-12-2006, 08:13 AM
someone help the guy out. i would but my bike is back at college right now in another state

pudamac12
01-12-2006, 12:49 PM
it is only three wires just try a few different combos with someone stepping on the brakes to make sure everything lights up like it should. Not that many combos to try. I had to do it this way and it worked really well.

beany
01-13-2006, 10:41 AM
I know that would be a possibility. This method won't burn out the led lights?? Just dont want to have to buy another tail light.

450rrider69
01-13-2006, 11:24 AM
of if ur looking at the side with the snap on it, it goes a like this. from left to right
dark green, brown, light green with a yellow line through it.

pudamac12
01-13-2006, 12:09 PM
no mine worked just fine and never burnt out the led