LT250Racer609
01-08-2006, 03:42 PM
i have a 87 race motor that was built by GT Thunder. The cylinder is a 265 and is ported and polished for MX. It has a boyseen Rad valve with carbon fiber reeds. Hinson billit clutch basket along with Hinson High friction race clutch plates. The engine has a new tranny in it and the oil was changed after every race....only 4 races on the cylinder since rebuild.
I have a Chrome LRD pipe that was cut and welded by Gt thunder to match the porting of the motor.
i also have a Air stryker 38 MM carb. that only has 3/4 rides on it and also have the stock 34 mm carb.
i will be getting rid of the spark plug coil too.....open to all money offers on these items
I have a Chrome LRD pipe that was cut and welded by Gt thunder to match the porting of the motor.
i also have a Air stryker 38 MM carb. that only has 3/4 rides on it and also have the stock 34 mm carb.
i will be getting rid of the spark plug coil too.....open to all money offers on these items