holeshot tire pressure

[400exrider0004]

hey guys I have the holeshot tires with burgard wheels. I was wondering what the most common tire pressure you guys run both front and back and what works best!!:D

Thanks

[400exrider99]

i have 4psi all around and i like it i an get traction when needed and i can slide them when needed

[goldrims04]

i run 6lb psi all around i feel it helps with cornering when the tires are harder and if u r trail riding and there is lots of rocks with a softer tire u might get a puncture this my opion hope it helps

[Sleeper]

Hate to say it but the higher the pressure the more likely you are to get a puncture. Just try it with a balloon. I do have to agree with you about the cornering though (at least with stock a arms) I like to know chances are better I will slide than flip, I think you can safely go down to 4 psi and still be very slidable though.
I run between 4 and 4.5 psi my self.


Sleeper

[goldrims04]

Originally posted by Sleeper
Hate to say it but the higher the pressure the more likely you are to get a puncture. Just try it with a balloon. I do have to agree with you about the cornering though (at least with stock a arms) I like to know chances are better I will slide than flip, I think you can safely go down to 4 psi and still be very slidable though.
I run between 4 and 4.5 psi my self.


Sleeper i run very agressive tires they have 6 plys and with that i feel more pressure doent matter and if ur trail riding stock arms are the way to go

[balls2da-wall]

5psi front- 4psi rear

Ran 4 in the front for about 2 races this season and then one track had a pretty good sized log in it...went to jump it and had a rude awakening when my front tires flattened and I got jarred around pretty good. Thank God for Hipers:p . Since then ive been running 5 in the front and it seems to be the magic number.

what about for stock tires

[balls2da-wall]

same