KBR HillShooter/Drag Bike

[kgbg]

I know there is not too much love for this type of quad with the MX guys, but here goes.
Its 99% complete and the last 1% will be decided on the dyno.
Thanks to Venom Powersports

[kgbg]

One more

[chad502ex]

wow, that monster looks real mean and real lite for fsw.

good luck! let's see the dyno! wahoooooo!

[Jersey450R]

pretty bada$z quad there. cant wait to see some numbers on that.

[depotman19]

Great Job Kam! Looks great! Why so many paddles. I thought less was better, Say a 6 paddle or so?

[R3Concepts]

Kam looks great..Where did you get the header wrap that lays over well like that? All the stuff we have is for asphalt drag stuff and is super hard to bend.

[kgbg]

Look closeley at the paddles, they are not haulers.
I am not sure that they are the ones to run, they just looked the best.
Header tape takes lots of patience, time, and superhuman strength to make look good.
Its nothing special, your average wrap.

[chad502ex]

Originally posted by kgbg
Look closeley at the paddles, they are not haulers.
I am not sure that they are the ones to run, they just looked the best.
Header tape takes lots of patience, time, and superhuman strength to make look good.
Its nothing special, your average wrap.

I like the roll-out that your paddles seem to have. Isn't your paddles larger in diameter than typical?

you'll cross the line first if your engine can muscle larger "roll-out" than the others that line up against you with relatively similiar power.

Looks like you've done real good thinking with all the details on winning.

[iceracer65]

static rollout is far different than dynamic rollout...imagine those at their centrifugal limit!!

[kgbg]

It all comes down to getting it in the right RPM range that makes the engine happy, coupled with the ability to launch hard.

[chad502ex]

Originally posted by iceracer65
static rollout is far different than dynamic rollout...imagine those at their centrifugal limit!!

true. either way those Kam's roll-out appears bigger than standard...

:confused:

[chad502ex]

Originally posted by kgbg
It all comes down to getting it in the right RPM range that makes the engine happy, coupled with the ability to launch hard.

Kam,

are you going to be the rider? just wondering if you were going to get some 50 lb kid or if you were going to do the steering of that monster,...

[iceracer65]

just set it up to be radio controlled! just point and shoot!

no one would touch it:devil:

[chad502ex]

Originally posted by iceracer65
just set it up to be radio controlled! just point and shoot!

no one would touch it:devil:

LOL good one and very possible!! heh-heh.

[kgbg]

6' 4" 235 does not fare well for hillshooting.
My brother/partner is 170 and will ride it.

[chad502ex]

Well, I'm going to be sure I buy the FSW DVD from ATVFANACTICS.com again this year to see your R on the starting line.

Hope things go good for all and no tires get tangled like last year when that rider got flipped near the starting line,...

doh!

[iceracer65]

im 180, pay 1/2 my plane ticket and ill swing a leg over that female dog!!


oh and i guarantee i wont flip it:devil: o/k

[iceracer65]

BUMP!!

well howd it do??

i dont see your name in any of the official finishes.

[R3Concepts]

I think they got 4th..

Rumor has it that they ran out of gas.:ermm:

I weigh 130 lbs and could get down to 120 if i ran my fat off..

I would be more than glad to climb some hills for u! :devil:

[iceracer65]

Originally posted by R3Concepts
I think they got 4th..

Rumor has it that they ran out of gas.:ermm:


...according to the dyno they should have won:p :devil:

[TURBO-530R]

what did the dyno say??

[TrX450rKiD]

Originally posted by iceracer65
...according to the dyno they should have won:p :devil:
With a last-second back up engine?

[kgbg]

We did not take 4th, we lost in the qualifiers.
I know for a fact we could beat two of the bike in the final be many lengths, in fact we beat one in the one qualifer we won.
We had an issue with pistons and valves kissing, and ruined our big number head 3 days before we left (not to mention we ruined our good piston and had to run an old piston we retired a while back).
We left quite a few hp and ft lbs at home, and were still within 1-2 bike lenghts of the winner.
Our bike ran consistently in the 55-56 mph range on the big end of the hill.
We had a good time and met some good freinds.
As much as you would like to try to take away from that Iceracer, you can't.

[chad502ex]

Good to hear you had fun. That's what its all about-fun.

Many of us heard of your stock valve spring float probally before you did on your cruise. That suks.

Better luck next year.

[kgbg]

We will be back with a bigger better stock bore, and we will have it at Dumont for Banshee wars on Feb 11th.

[Bigun55]

Dang that is nice.. .Id say she will run 2

[BOONE450R]

Kam, you guys going to run Pismo 4SW this summer if they have one?

[iceracer65]

only kidding kam;) sorry you had bad luck, hope its better next year.

have you seen this pic? i think that is your bike right??
http://www.glamisdunes.com/photopost/watermark.php?file=500/59start6-med.JPG

they are gonna have to start making a multicylinder class if stuff like this keeps showing up:eek2: :eek2: :eek2:

click me (http://www.planetsand.com/memberphotos/406416-Default_16.mpg)

[kgbg]

Thats my bike, good jump we got huh?
Thats the race we won, then had to line up again and suffered a problem.

[2MuchChi450R]

looks pretty kickass, I like the black cylinder and head cover. I dunno, I'm a fan of blacked out engines for some reason. Old school racer fan. :D