ultimate 300ex suspention

[elementryder]

i am going to get a tc racing engine 297cc/well i wanted to get some long travle +3 a arms and some shocks to go with that what is a good set up /also thinking about +2 swinger and rear shock / im running on a budget and going to start racing (13-15) mx seires i weigh anny whare from 192-199lbs

[elementryder]

sorry i wanted after market shocks and a wider axle/i heard that the ghd lt a arms are good how do you get a hold of them/or are they

[hondardr4life]

WELLL, if you wanna get crazy with the 300ex suspension. Forget the GHD a arms or w/e because they only accept 16 inch shocks. Buy some +1 or +2 long travel 400ex a arm, get the shock relocator bracket, and get 19 inch quadrate PEP 400ex big can 8 click shocks. 400 a arms do not mess up your geometry to the point that its noticible, even though everyone says it does. That would be the ultimate MX front end. Now about the rear end, I would just find a +2 swinger. I dont think they make LT rear end for a 300ex, so just get that and an elka rear shock, because PEP doesnt make 300 shocks, lol.

[hardkoratvmxr]

Get the GDH front and soon to be rear end. way better setup than the 400ex front end. The 16" length shock would probably be better than the 19" peps on a 300 I mean come on.

[elementryder]

how do i get a hold of ghd for the a arms/ would works shocks work because i cant afford peps where do i get these i see them on web sites like rockymoutain but i dont know if they personally set up/also should i get a +4 axle and where can i get a cheap +2 swinger

[bradley300]

Originally posted by hondardr4life
PEP doesnt make 300 shocks, lol.

yes they do, tracci cecco ran PEP on her lonestar/TC 300ex at the gncc's

[kyleschonert]

Thats why ive got a PEP shock on my 330ex:confused:

[elementryder]

all right dont care about peps what about my last question lol.

[holister]

i'v got burgard +2 standard travel a arms and a +2 burgard swingarm with a works pro series with an eibach spring

[elementryder]

i wanna get the ghd's/////are works shocks anny good if so where do i get the cheapest new ones and what are they 400ex standered travle what set up should i get (rezzi comp adj exc.) ///////what about the cheapest +2 swinger and +4 axle and where do i get them

[300ex mxracer]

well i use works 400ex standard length triple rate w/ rezzies with a relocator bracket and some 400ex asr +2 mx a arms on my 300ex. works great!

[bwamos]

I've been using Works Steeler AT dual w/ res & preload adjust on the front with Works UltraCross fully adjustable on the rear.

I've been using them for 6 years. They work great.

They are not as good as a set of high end Elka's, but they are more than enough for what I need them for. MHSC, Dunes, Agressive Trail, and Play MX.

However, I did but them when the only options were PEP and Works. PEP's at the time were like $3k. So I went with the Works route. I would have gone with Elkas if they were around.

I reccomend Elka's, but if you can find a set of Works cheap, go for it. ;)

[Cody_300ex]

Originally posted by elementryder
i wanna get the ghd's/////are works shocks anny good if so where do i get the cheapest new ones and what are they 400ex standered travle what set up should i get (rezzi comp adj exc.) ///////what about the cheapest +2 swinger and +4 axle and where do i get them

I suggest GDH's and YFZ stockers, heres my experince with works..... http://www.exriders.com/vbb/showthread.php?s=&threadid=188242&highlight=Lil300exkid

[elementryder]

i am going to see if my dad will get me elkas what is the cheapest +4 axle and what about the +2 swinger and where do i get them

[400exMO]

For the cheapest axle look into gforce. They're on rockmountainatv.com, but I'm not sure if they make them for the 300ex. As far as swingarm is concerned, I would reccommend the same brand aarms. Burgard makes excellent inexpensive products, burgardcycle.com

[awsomeaussies]

Ya, look into the g-force axle. There only 200 bucks and work awesome! Checkout some used shocks. Try the forsale section and ebay;)