crack body

[casper17]

whats a good way 2 fix a crack in the body with out buying a new one

[ZeroLogic]

Drill a few holes on each side of the crack. Then put a few zip ties in the holes and strap them up.

[crewworrior]

go buy a fiberglass repair kit it works great just put it on the bottom so noone can see it

get a plastic weld kit

[Rip_Tear]

Depending on how bad the crack is you will have to decide for yourself what to do, I have been stiching my fender here for a while, but the mounts are pretty much torn off now so I have to buy new plastics...

Originally posted by Rip_Tear
Depending on how bad the crack is you will have to decide for yourself what to do, I have been stiching my fender here for a while, but the mounts are pretty much torn off now so I have to buy new plastics...

i sold a whole set of yellow plastic for $60 shipped:eek2:

[TheFontMaster]

Originally posted by crewworrior
go buy a fiberglass repair kit it works great just put it on the bottom so noone can see it

I have never tryed this, but I wouldn't want to fiberglass plastic, because the plastic will flex, and fiberglas is reletiviley stiff, and won't slex like the plastic would, and it would just crack again.

The best way would be to plastic weld it. Or if you don't have acces to a plastic welder then you will have to stich it like Rip_Tear said, You can use zip ties, thin wire, whatever works.

[wboy62417]

depends on where it is my back ones crack so i bolted a small metal plate to the underneath side of them works great hasnt cracked anymore since

[Fenix169motox]

i just used a really really hot soldering iron and used a weld pattern to fix em, it worked pretty good