ramp rida 55
01-02-2006, 05:31 PM
a friend of mine had his bike for sale it is 100%mx ready and is very competitive in all four-stroke and open classes and has taken numerous 1st places. it is the 2004 2nd place fourstroke C machine as well. the motor is fresh and runs like a gem
Chassis | Suspension | Controls:
Frame: Gusseted and powdercoated
A Arms: Gibson +3 longtravel
Swingarm: Lonestar +1.25
Subframe: RPM
Steering Stem: Lonestar + 1
Stbilizer: Gibson
Axle: Lonestar
Carrier: Lonestar
Locknut: Lonestar
Hubs F|R: stock/lonestar
Bars: Protaper pastrana fmx
Throttle/Clutch Lever: stock/rtc
Grips: Tag
Nerfs: Gibson standard
Bumper: Blingstar powdercoated
Grab Bar: Homemade black
Front Shocks: Axis LT dual adjust triple rate
Rear Shock: Axis single adjust single rate
Brake Lines: steel braided
Rotors F|R: stock/wave
Rims F|R: douglass rolled edge 4:1/omf 9" scalloped beadlock
Tires F|R: Grooved radials(not pictured)
Body:
Plastic: Stock shaved
Graphics|Seat Cover:none/blue K&K (not pictured)
Number Backgrounds: K&K
Handguards: none
Bar Pad: Tag
Fuel Tank: stock
Engine|Drive System:
Cylinder|Head: ported/polished, oversize valves, webcams. 13:1 compression
Bore & Stroke: 94mm x stock
Displacement: 435cc
Carburetor: Edelbrock
Air Filter|Box: Prodesign dual stage foam
Pipe|Silencer: Curtis Sparks
Clutch|Plates: Barnett
Gearing F|R: stock gearing sidewinder sprockets and chain
CDI|Killswitch: Yoshimura
Cooling: Fluidyne radiator
Other:shaved seat foam (not pictured),
http://tinypic.com/dwa0jc.jpg
http://tinypic.com/dwa05t.jpg
http://tinypic.com/dwa0s8.jpg
he is looking to get $3500
it also comes with an extra engine it is a built 450 that needs a new piston and sleeve.
e-mail: mkdmiked@aol.com
Chassis | Suspension | Controls:
Frame: Gusseted and powdercoated
A Arms: Gibson +3 longtravel
Swingarm: Lonestar +1.25
Subframe: RPM
Steering Stem: Lonestar + 1
Stbilizer: Gibson
Axle: Lonestar
Carrier: Lonestar
Locknut: Lonestar
Hubs F|R: stock/lonestar
Bars: Protaper pastrana fmx
Throttle/Clutch Lever: stock/rtc
Grips: Tag
Nerfs: Gibson standard
Bumper: Blingstar powdercoated
Grab Bar: Homemade black
Front Shocks: Axis LT dual adjust triple rate
Rear Shock: Axis single adjust single rate
Brake Lines: steel braided
Rotors F|R: stock/wave
Rims F|R: douglass rolled edge 4:1/omf 9" scalloped beadlock
Tires F|R: Grooved radials(not pictured)
Body:
Plastic: Stock shaved
Graphics|Seat Cover:none/blue K&K (not pictured)
Number Backgrounds: K&K
Handguards: none
Bar Pad: Tag
Fuel Tank: stock
Engine|Drive System:
Cylinder|Head: ported/polished, oversize valves, webcams. 13:1 compression
Bore & Stroke: 94mm x stock
Displacement: 435cc
Carburetor: Edelbrock
Air Filter|Box: Prodesign dual stage foam
Pipe|Silencer: Curtis Sparks
Clutch|Plates: Barnett
Gearing F|R: stock gearing sidewinder sprockets and chain
CDI|Killswitch: Yoshimura
Cooling: Fluidyne radiator
Other:shaved seat foam (not pictured),
http://tinypic.com/dwa0jc.jpg
http://tinypic.com/dwa05t.jpg
http://tinypic.com/dwa0s8.jpg
he is looking to get $3500
it also comes with an extra engine it is a built 450 that needs a new piston and sleeve.
e-mail: mkdmiked@aol.com