300ex clutch lever

[drifterx]

Well, i rolled my damn 300 yesterday on a country road me and my friends were on. Sliding around 3rd gear, and slid out on a really loose patch, hit the grater ditch sideways, and flipped into a field. At least i got off, a little scraped up and bruised, but ok... I tweaked my MSR handlebars, broke off my clutch lever, and bent the crap out of my brake lever, and grab bar. I need new levers asap, and was wondering if i have to get them directly from Honda to still have the reverse button. I was looking at some motion pro replacements, but the picture doesn't show anything for the reverse button, and i was wondering if its suppose to, or what. Thanks!

[drifterx]

Anyone?

[RRP]

i bought the MSR's from rocky mountain for my 300 it comes with everything but the red plastic button(cap)but will work fine without it.I got both levers for less than you will probably pay for just the clutch lever from honda.

[TarheelRedRider]

Little mod for you. I used a 450r lever and bracket and housing. Got rid of the parking brake. The 450r clutch housing has only two locations for cables, the hot start and the clutch. Lose the hot start and run your reverse cable there and use the 300ex reverse plate in the 450r clutch housing. It is a lot easier to use when engaging the reverse cable. You can get the 450r clutch assembly off ebay for around 20bucks. All the racers lose the stock setup for the 450r so there should be plenty forsell.

[Sjorge450R]

im extreamly happy with my ASV setup but they are a little pricey, thats why you got to thank the sponsers.lol

[KEVIN132]

SOMONE PUT UP A PIC OF THERE SETUP PLEASE!!!!!
lookin for this for my kids bike.

[hardkoratvmxr]

Here is my setup but I have to go pick up my kx style killswitch and it should be close to finished on the bars

http://www.imagestation.com/picture/sraid191/p04f4e74882619952d55e9b868e2c250c/f1d3b771.jpg

http://www.imagestation.com/picture/sraid191/pf435169ca7de15ce323e80c06da073e6/f1d3b718.jpg

the handlebar switch thing is mounted there until i get my kx killswitch but that is my setup

[drifterx]

Dude, this is my thread! :huh j/k, i'm going with the MSR's i think.

[exrider008]

what is the difrence for the stock 300ex to a 450r clutch lever because i hate my stock clutch.
thanks.