crf cam

[goldrims04]

does anyone run the crf 2002 cam if so some details thanks and how was it putting in. will it work in the 04 trx

[shamisc]

I do, and I love it. The only other cam I would consider is the HotCam stg II or the '05 CRF. It has tons of bottom end torque and pulls hard in the mid-range, but it don't fall off on top. Installation is easy with a service manual!:cool:

[chad502ex]

hasn't someone already posted part number for the HRC cam, crf 05 cam?

[MAD450r]

They may have chad. I never wrote them down to tell him. So I figured what better place to ask then here.
You guys always have answers for guys like us who dont dig into our motor's like other's do :)

[chad502ex]

Originally posted by MAD450r
They may have chad. I never wrote them down to tell him. So I figured what better place to ask then here.
You guys always have answers for guys like us who dont dig into our motor's like other's do :)

we try to help when we can.

Maybe you misunderstood a bit, I was asking because I need the p/n info too. I'm just to lazy to do the search. I know the p/n are out there- I was hoping someone else could help me.

thanks.




chad

[MAD450r]

I've been trying to search them out, but the server keeps erroring today. No luck at all on searching.

Originally posted by shamisc
I do, and I love it. The only other cam I would consider is the HotCam stg II or the '05 CRF. It has tons of bottom end torque and pulls hard in the mid-range, but it don't fall off on top. Installation is easy with a service manual!:cool:

im stuck on wether i want the 2002 crf or the 2005 crf :confused:

[goldrims04]

Originally posted by Yurik Norton
im stuck on wether i want the 2002 crf or the 2005 crf :confused: whats the diff between 02 and 05

Originally posted by goldrims04
whats the diff between 02 and 05

the 02 has more mid-top end pull, and the 05 is more all around power

[goldrims04]

Originally posted by Yurik Norton
the 02 has more mid-top end pull, and the 05 is more all around power with this cam and this might be a dum question but i am new to this stuff any other stuff i need to do or buy

Originally posted by goldrims04
with this cam and this might be a dum question but i am new to this stuff any other stuff i need to do or buy

all you need is the cam and a gasket and your good to go :macho

[Ex_Rider43]

I have tghe CRF 02 cam in my 2005 TRX , I will never change it I love it compared to the HRC and I race MX all summer long. Ill try a pretty big piston this year with valves and everything with it.

[MAD450r]

Im even looking to get a second R, it will have the hrc in it already if I get the one I want.

then i'll have both 04 and 05's
The 05 I will leave with just the stock pipe for trail riding. I love my sparks on my 04, but its so loud to ride just anywhere is asking for trouble.

[HP1]

Originally posted by chad502ex
hasn't someone already posted part number for the HRC cam, crf 05 cam?

Here ya go:

14110-NLZ-650 2004 TRX450R HRC Cam
14110-MEB-670 2002 CRF450R Cam
14110-MEB-770 2003 CRF450R Cam
14110-MEN-670 2004-2005 CRF450R Cam


The CRF cams are all $167 or so from Service Honda. The '04 TRX HRC cam is about $215.

[chad502ex]

Originally posted by HP1
Here ya go:

14110-NLZ-650 2004 TRX450R HRC Cam
14110-MEB-670 2002 CRF450R Cam
14110-MEB-770 2003 CRF450R Cam
14110-MEN-670 2004-2005 CRF450R Cam


The CRF cams are all $167 or so from Service Honda. The '04 TRX HRC cam is about $215.

Thank you SIR!!

I knew someone as knowledgeable as you would come around and answer. I've seen and followed your posting and I really appreciate your input. Thanks.

[MAD450r]

Thanks been hoping someone would post that info again.

[shamisc]

Originally posted by Yurik Norton
all you need is the cam and a gasket and your good to go :macho

You won't need a gasket, just the cam. The valve cover has a rubber o-ring type seal. ;) Make sure you check your valve clearances after installing the cam. It may need re-shimming.

[goldrims04]

Originally posted by shamisc
You won't need a gasket, just the cam. The valve cover has a rubber o-ring type seal. ;) Make sure you check your valve clearances after installing the cam. It may need re-shimming. thanks for your help

[goldrims04]

Originally posted by MAD450r
Im even looking to get a second R, it will have the hrc in it already if I get the one I want.

then i'll have both 04 and 05's
The 05 I will leave with just the stock pipe for trail riding. I love my sparks on my 04, but its so loud to ride just anywhere is asking for trouble. what the 04 isnt good enough for u oh i see how it is.j/k hey by the way happy new year spring is going to be hear someday:D

Originally posted by shamisc
You won't need a gasket, just the cam. The valve cover has a rubber o-ring type seal. ;) Make sure you check your valve clearances after installing the cam. It may need re-shimming.

well thats nice of honda to do for us :macho

[MAD450r]

I almost never ride my 416 now that I got my suspension dialed in so I might as well sell now while I can still get a decent amount back for it. I have just about 13,000$ in that thing, and I let everyone else ride it since im usually on my R.

Figure if I have 2 R's it'll be one for trails and one for over on are track/field.

Happy new year right back at ya. Yeah I hate this damn snow up here in new england. My vision makes it too hard to ride when everythings bright white. :(

[goldrims04]

Originally posted by MAD450r
I almost never ride my 416 now that I got my suspension dialed in so I might as well sell now while I can still get a decent amount back for it. I have just about 13,000$ in that thing, and I let everyone else ride it since im usually on my R.

Figure if I have 2 R's it'll be one for trails and one for over on are track/field.

Happy new year right back at ya. Yeah I hate this damn snow up here in new england. My vision makes it too hard to ride when everythings bright white. :( thats cool i wouldnt sell the 416 but if u do put it out at dennis house it will sell fast

[XCRACER26]

what kind of power can I expect out of a 03 crf cam?