a few questions...

[hondajoe05]

when i getthe new hotcams stage 2 do you have to rejet? and will it come with info on what the valves are suppose to be adjusted to

and will renthal rc high bars fit on stock mounts? haha ya i don't remember if i read somewhere 1/8 and 7/8 fits on but i dunno

[400exMO]

Yes, you will need to rejet with the new cam.

As long as the bars are 7/8" they will bolt onto the stock clamp.

[hondajoe05]

ya this is probably another stupid question but i don't know so much about jetting/carbs

http://www.jetsrus.com/a_jet_kit_atv/honda_TRX400ex.htm

thats a jet kit for the 400ex if i buy the kit will i have to buy pilot
jets to? or do they come with it cuz i don't think it saysi know that it comes with all the main jets

or should i jus go with the dyno jet kit

[hondajoe05]

bump....

[zrpilot]

I have that kit and it does not include the pilot jet. If I had to do it again I'd go to the Honda dealer or www.servicehonda.com and just buy the jets I need.

Good luck

Max

[hondajoe05]

ya well i would buy seperate jets to jus the ones i need but i need the instructions cuz i woudln't no what i am doing ne ways

if i got that kit what size pilot jets would i need for hotcams stage 2... for about a mont till i get more money to get a hmf slip on since i have to wait im gonna go ahead and buy 2 different size's i guess

or should i jus go with the dyno jet kit? does it come with the right pilot jets?

[zrpilot]

No the Dynojet kit does not come with a pilot jet. Buy them seperate. There is a very nice how-to jet somewhere on this forum, just do a search. It will "instruct" you. I would go with a 42 size pilot jet. It will help idle and cold starting.

Good luck

MAx

[hondajoe05]

ty for the quick replys

[hondajoe05]

bump

[400exrider26]

zrpilot- i looked at that jet kit and someone told me that it has jets sized to the same size as Keihin jets... is that true? Also, how good do those stainless steel allen head bolts work? Can u just replace the bolts for the carb bowl or are there more bolts you could replace? Because the screws on the stock carb strip so easily.

[zrpilot]

It depends on which jet kit your talking about. The Jets-R-US kit is the same as stock Keihin jets. However the dynojet kits use a different numbering system for the same sized jet.

The screws are meant for the carb bowl only and solves the problem you mentioned, stripping out. They work good by the way!

Good Luck

Zrpilot

[hondajoe05]

ya i am very confussed now does no one offer a kit for retards? that inculdes everything you need cuz thats what i need