can you put a new grab bar on a 400ex

[Hondaexboy]

Hey,
I was wondering if you can put a new grab bar on a 400ex

i have a 02' and it is buit into the subframe

I would like to get a larger grab bar though

Thanks

[atvracer980]

yes you can but the factory one needs to be cut off and new holes need to be drilled and possibly welded for a new grab bar- all info should be contained w/ a new grab bar purchase

[ImWhite]

ive seen em different ways,maily cut the stock 1 off then weld a whole new back piece to the subframe....if u cant weld go to a car shop,they should b able to do it there just tell them how u want it....

[400EXtreme]

you can get ones that just mount on to it ive seen them.

[JOEX]

Some are cut then weld on tabs and some are bolt ons.

The older PRM bumpers were cut and weld but I belive they only manufacture bolt-ons now.

[400EXtreme]

Originally posted by JOEX
Some are cut then weld on tabs and some are bolt ons.

The older PRM bumpers were cut and weld but I belive they only manufacture bolt-ons now. Ya i saw some that were bolt ons im pretty sure it was PRM

[400EXtreme]

i found 1 for ya http://prm-atv.com/MN.asp?pg=products&specific=282&from=47&mfr=2

[trx400exxracer]

yeah the ones at prm use U bolts which allows you to leave the sub-frame alone

I have been thinkin about getting it

[ImWhite]

didnt some1 on here make a new 1?i forget who it was but it was badass.....i want 1 that looks stock not the desert 1...has any1 seen those?

[hondajoe05]

you can get a aftermarket subframe... and then use 250r grab bars