shelbygt350
07-02-2002, 09:03 AM
I've had my 2002 400 for about 1 month now. I just finished the break in period (no 5th gear romps) I've changed the oil and oil filter, changed the air filter, checked the chain and all of the hoses and bolts. Is it neccesary to have my dealer check the valves for $160. I know that would be the final step in the break in but the quad runs pisser, and I feel that it might be a waiste of money. One other question, has anyone had problems with break pads sticking? The reason I ask is this weekend was the 2nd time I had my Finace on the back of the machine and 1/2 way through the ride, I could hear a squeaking when I turned HARD right after a few whooptdoos but no squeaks on left turns. It almost sounded like something was rubbing like when the stock skid plate wraps around the rear disk, but I have a DG Swing arm plate with 1" clearence. My buddy behind me heard it also but could not pin point it, could it be the chain guide? The only thing I could find different between my quad and my friends is that my front tires lean in at the top about an inch like allot of race quads do, should I adjust the shocks to 5 and stiffen the rear to (HARD). I'm looking for any ideas because this did not happen the 1st time I had her on the back. Thanks:huh