PDA

View Full Version : Will trade a 300EX for ? ASK! Will consider



hondapro300EX
12-27-2005, 09:51 PM
Have a 1995 300EX. With Brand new orange Meir plastic(never rode with) Front and rear. 400EX bend renthals, Brand new richochet chasis skid plate(never rode on), Brand new hot start asr mx clutch perch(meaning no more of that stupid looking clutch perch and easier to put in reverse), K&N air filter, Brand new white brothers head pipe( Never rode on), Black HMF pipe(never rode on), Brand new oury grips(never rode on), crome oil cap, new front brakes, Brand new Slasher front tire(never rode on), Brand new 400EX pro plate moose front bumper fitted on it(Never rode on it.), Aftermarket bearing carrier. Brand new chain and seals, Acrebis pro rally hand gaurds, moose brake lever(have clutch lever to), moose easy pull clutch system(easier clutch pull)

Also have a lonestar 86-89 250r swingarm. Needs new paint but other than that in good shape.

Will have pictures as soon as i go pick up the bumper, pipe, clutch.
Thx

300ex_#387
12-27-2005, 10:10 PM
If you ever interested in parting out, I am very interested in a couple of those parts.

426WARRIORMAN
12-27-2005, 10:31 PM
I have a newly done 2001 Blaster with a newly rebuilt from top to bottom Tri-Z 250R motor in it.
Mods:
Tri-Z 250R
Gusseted frame
4" Jawz Swingarm
4" Lonestar Axle
Rm250 Expansion chamber
Cobra Silencer
Pivot Works Bearings
Motion Pro brake cable
Twist throttle
Clear Braided Radiator Hoses
Hasnt Been Ridden Yet Either!
Charcoal Gray frame
Silver A-arms
Silver swingarm
Red roundhouse (carrier)
New red shocks
New Brakes
Rear brake caliper is silver and red
Black shaved plastics (No Longer White)
The quad looks like new and has always been in my climate controled garage so you know it hasnt set and collected rust in some moist area.
It needs graphics put on and a airfilter.

ThorRacing37
12-28-2005, 08:49 AM
do u got pics? where r u located?

hondapro300EX
12-28-2005, 09:45 AM
I got to wait until those parts to come in at my shop.
Until then i have to wait. Bumper, clutch, hmf pipe. Will post pictures as soon as they come in.

I live next to Winston Salem. Get there and will give you the directions. or call (336)983-8171.

Thx

426WARRIORMAN
12-28-2005, 10:12 AM
Are you talking to me?
Are you interested in trading for my quad?

hondapro300EX
12-28-2005, 03:01 PM
I like that 250r/blaster. Not only will consider it i will do it!

We can meet up and trade as soon as you want to.

Phone #number is (336)983-8171. Ask for Jeremy. I should get those parts monday. Cause they are closed for christmas vacation.

Is there anything i should know about the quad that you know i don't know. But anyway just tell me when and well make it happen.

426WARRIORMAN
12-28-2005, 04:01 PM
It leaks alittle oil from the drain plug, It needs a new plug. Also needs a good clutch cable, The one thats on it is sticky.
Thats about it that I know of.
Can I see the 300ex? pics?

426WARRIORMAN
12-28-2005, 04:07 PM
Originally posted by hondapro300EX
I like that 250r/blaster. Not only will consider it i will do it!

We can meet up and trade as soon as you want to.

Phone #number is (336)983-8171. Ask for Jeremy. I should get those parts monday. Cause they are closed for christmas vacation.

Is there anything i should know about the quad that you know i don't know. But anyway just tell me when and well make it happen.
Just gave ya a call and no answer.
I left my # so call if you like.
Thanks

hondapro300EX
12-28-2005, 08:36 PM
Will be monday until I can send pics. Because the shop I got the parts are closed on vacation. Will send pictures first thing monday morning.

426WARRIORMAN
12-28-2005, 09:23 PM
Are you willing to drive?
I cant drive any further than 100 miles or so.
Hopefully you are.
Let me know

hondapro300EX
12-29-2005, 09:06 AM
I am willing to do the same.

I saw a site one day that you tell them where you live and it tells you the distance. Gonna look for and find the distance.
Hopefully it want be alot.

Received your phone call but was at work. Sorry bout that. I am still very interest. I already looking for stuff for that engine.

Talk to you soon.
Jeremy

hondapro300EX
12-29-2005, 09:17 AM
Where do you live at in Indiana. What i am thinking we can do is each drive halfway. Which is the easiset way. Got to know your zip and county to find out how many miles it is thought.

Thx

426WARRIORMAN
12-29-2005, 05:19 PM
Its about a 4hr drive for each of us. roughly 500miles
Go to mapquest.com.
My zip is 47331.
I could probably meet you in Grayson, Ky. at the college there.
Let me know
And by the way...
Before you start looking for hop-ups for this motor....You might want to ride it first, lol. After doing so you will probably see hop-ups arent needed.

hondapro300EX
12-30-2005, 06:00 PM
Hey man,

When do you want to meet this month next month?
Job is cutting my hours and might be 2 or 4 weeks. PLuse I have to give my job two week notice before i can take day off. And got to save up around $150 for gas(estimate to get that far)(added it up if my truck gets 25 mpg.) Or I thought about taking a trip to West Virginia and could meet there. And both could ride. Just a thought.(Camping) But if don't want to sounds fine. That Grayson area sounds fine to.

Just tell what you want to do. It will be the middle of January before I can do anything. Just put around $900 on that 300EX. And that broke me. Got bills.

talk to you soon. Will give you call tommorow.

426WARRIORMAN
12-30-2005, 08:14 PM
Ok thats cool.
I wont be able to do the camping thing but I could meet you at the Cabelas store at wheeling west virgina. And if not... Grayson Ky will work too. Im not going to be riding this now since were doing this so you will get a fresh bike. I dont have time to ride now anyways working on my nova and working at my job. It would be nice if we could do this sooner though.
I still would like to see pics though before we carve this deal in stone. Those parts your waiting on doesnt have to be on for me to see pics anyways, So if you can get some pics tomorrow I would apreciate it, cause I may have another deal going, But I want to give you the oppritunity to get this quad first since I was talking with you first.
So let me know man.
THanks

426WARRIORMAN
12-30-2005, 08:16 PM
Bumpin

hondapro300EX
12-30-2005, 11:33 PM
I Will have pics today

hondapro300EX
12-31-2005, 12:57 PM
Will have pics at 10:30 tonight. Brother is being a ***. Have to wait till i get out of work to get friends. I promise they will be on this site 10:30-11:15!!

Talk to you soon. Remember thought parts havent came in yet thought!

Cya

hondapro300EX
12-31-2005, 12:58 PM
Thank you for being so patient

hondapro300EX
12-31-2005, 01:02 PM
Oh yea having new clutch cable put on it and having starter rebuilt. Because it want start right now. So having shop either rebuild it or new one. Both cost money. I don't know why the starter is messed up. Oh well it will be fixed.

426WARRIORMAN
01-01-2006, 01:13 PM
Wheres the pics at?
Please put them on here today. ok?

hondapro300EX
01-01-2006, 02:06 PM
these are the pics of the 300ex that i am wanting to trade...

426WARRIORMAN
01-01-2006, 02:33 PM
hey were both online right now, There still not showing up.
Try again or email them to me.
Woodro350@yahoo.com
Thanks!

426WARRIORMAN
01-02-2006, 06:18 PM
Hey man..I was wondering if you was going to post these pictures or email them to me.
Thanks!