Lt80 advice, and need parts

[skippy1999]

What plug is best to use? I'm rebuilding one.. has aftermarket reeds, over bore, fmf pipe, but stock air cage.. w a uni..

Also have any parts?> I need an sprocket hub, a right side vent pipe from the right cover to the airbox, wheel spacers, a new plug cap, aftermarket bumper, and a bolt that mounts the rear center hub to the plates on either side...

skippy3@erols.com

[maggiesboy]

here is a bumper flea-bay (http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1,1&item=4599300660&sspagename=STRK%3AMEWA%3AIT)

[maggiesboy]

I'll check and see if I have the sprocket hub and vent pipe too. Tell me more about the bolts for the rear center hub, you got me lost on that.

[skippy1999]

the bolt is very narrow and long.. there are approx 4 of them that hold the rear end together.. bolt and nut assembly..

[maggiesboy]

which number? :D

[maggiesboy]

DOn't need anything now?

[LT80]

1,3,and 4 are simple 8mx125x25 (25 is a lil longer than the stock ones). No nuts on those
2 is the carrier mounting bolt. It's indeed long and uses a nut.