new hipers.

[rookiex]

its a lil dark. but I got some new hipers on the front end.One question too.

Does my ride height in the rear look too high?

[rookiex]

front

[Phills450r]

must be nice :(

[450r51]

nice bike, one question, do u know if legacy still sells those graphics

[the predator]

just make sure the fron tand back are level with you on the bike, oyu set your own desired ride height, but from 7" - 8.5" is a good starting area...then ride it to make sure you're not pushing in the corners if you are try tire pressure if that dont work try raising the rear end 1/8" at a time untill it goes away...

let us know how it works out

[KEVIN132]

got new hipers also. when you tighten the 3/8 12 point bolts, how tight are you all making them (tourqe)?should the rings meet the rims??

[01blaster5415]

very very nice

Originally posted by KEVIN132
got new hipers also. when you tighten the 3/8 12 point bolts, how tight are you all making them (tourqe)?should the rings meet the rims??

they should be around 11-12 pounds on each 1, but there shouldnt be any like huge gap or anything, it should be small if any gap, if there is a gap check the tire and check and see if you have maybe a small pebal or something logged up in there

[Bigun55]

Nice 450

[trx400exxracer]

Originally posted by 450r51
nice bike, one question, do u know if legacy still sells those graphics

I dont think they do all they have on their website is new ones with women on them but I like the other ones with the Joker, dice, and tnt.

You could probably e-mail them and see if they have any more from the last year

they are one of my previous sponsors but they didn't show much support and they don't have much stuff for the 400ex

[rookiex]

i tighten them down to 10lb's each with a digi tourqe wrench I made it so there was a very small gap.I was thinking about fillin the bead with the bead lock tar stuff.but didnt