xtremetoyz
12-26-2005, 07:07 PM
COMPLETELY ALUMINUM RACE READY 250R...........
2003/4 LRD Aluminum frame{no cracks like new w/newwer peg mounts}
-Roll Design lobo 2 +3+1 long trave a-arms{chrome uppers}
-Roll Design lobo II long travel swing arm
-+4 RPM axle with spacers for +2 or +4
-Long travel zero preload custom axis shocks front and rear set for 190lbs
-Mayer silver plastic.race cut
-braded steel brake lines front and rear
-Roll design antivibe stering stem.w fat bar mounts
-Pro peg nerf bars
-Tag fat handlebars
-Moose aluminum thumb throtLe assambly
-lonestar aluminum rear hubs
-hose covers like braided steel
-lonestar sprocket hub
-lonestar billet carrier-
-lonestar brake block off
-full chassis skid-
-duncan front bumper
-ac grab bar
-nacs aluminum front hubs
-LSR aluminum rear hubs
-Custom one of a kind flame graphics
-carbon fiber hood with scoop
-carbon fiber tank cover
-carbon fiber shrouds
-gripper seat cover
-aluminum air box
-lsr stem mount {aluminum}
-aluminum rear brake res
-TETHER KILL SWITCH
-rtc folding clutch lever
-hand guards
-nacs aluminum seat bracket and knobs
-LSR anti fade brake hub with new rotor {not installed but included}
-aluminum magnetic drain plug
--wheels and tires-----
-----billet beadlock rear with turfs tammers- shamrock beadlocks with mxrs all CUSTOM POWDERCOATED WITH NO PLUGS AND ABOUT 90% TREAD-----
-----Motor....
-1988 solid bottom end with new gears for tighter 3 and up
-Stock cylender just got freshened up from La sleve miled and MX porting. 2 rides on it.
-ESR CR250 ignition with adj timing plate instaled
-CR250 intake and reed cage
-ESR TRX-5 3 piece pipe and silencer
-Billet alum ESR kick starter
-Billet case saver
-Cool head
-billet rear brake lever
-aluminum reed spacer
-polished covers
-keithin 39mm carb
-umi 2 stage filter
-aluminum radiator
-aluminum water pump impeller
-aluminum exhaust flange
-always run pure engine ice----
- RUNS AMAZING!-----
http://img.photobucket.com/albums/v493/x_tremetoyz/ebay3/lrd1.jpg
http://img.photobucket.com/albums/v493/x_tremetoyz/ebay3/lrd2.jpg
http://img.photobucket.com/albums/v493/x_tremetoyz/ebay3/lrd4.jpg
http://img.photobucket.com/albums/v493/x_tremetoyz/ebay3/lrd5.jpg
http://img.photobucket.com/albums/v493/x_tremetoyz/ebay3/lrd3.jpg
-----------------------------------------------------------------------------------------------------------------------------------------
2003 400ex with alot of goodies
chassis-
leager a arms {+2+1}
show polished swing arm{clear cloated}
lsr axle
lsr carrier
rtc shrouds
works stadium shocks {triple on front dual on rear with eboch springs}
ac nerfs
ac bumper
anti vibe stem
lots of billet flame on bar clamp and throttle etc
custom lights front
k&n filter
over sized oil tank
custom powder coated frame
custom carbon fiber hood with scoop
itp xcr {22 in front 20 in rear} 90% tread, on itp 190 wheels-NO PLUGS.
new silver race plastics {grey}
new bearings throughout
custom headlights {super white bright}
stainless brake lines
aluminum gas cap
custom seat cover w/tribal flames
aluminum shifter and brake
fat bars and mount
aluminum e brake block off
aluminum case saver
new chain and sprockets{ geared for the bigger tires}
ALUMINUM GAS on/off VALVE
polished front motor mounts
polished aluminum shock res holders
motor-
EDLEBROCK CARB
high comp stroked 416 kit
ported head {monster trinity stage 2 port work}
white bros exhaust
big gun cdi
hinson clutch basket
stainless valves and seats
stage 2 trinity cams
pics- {if they dont show cut and paste them}- quad is dirty from last trail ride is OKLAHOMA....
http://img.photobucket.com/albums/v493/x_tremetoyz/ebay3/400ex3.jpg
ttp://img.photobucket.com/albums/v493/x_tremetoyz/ebay3/400ex2.jpg
http://img.photobucket.com/albums/v493/x_tremetoyz/ebay3/400ex1.jpg
-------------------------------------------------------------------------------------------------------------------------------------------
20' HALMARK RACE TRAILER -
30AMP BREAK FOR THE AC/HEAT UNIT ON ROOF, SHELVES, STORAGE ON WALL FOR OILS AND SUCH, RACK FOR GAS CANS, FLOURESCENT LIGHTS, 12 VOLT LIGHTS WHILE HOOKED TO TTRUCK, VENT, CARGO DOORS, 2 5200LB AXLES BOTH WITH BRAKES---
http://img.photobucket.com/albums/v493/x_tremetoyz/ebay3/team.jpg
-------------------------------------------------------------------------------------------------------------------------------------------
SDG MINI RACE PIT BIKE-
SDG WITH 36MM RACE FORKS DIALED IN FOR 190LB RIDER , 4 SPEED MANUAL TRANS , PORTED AND POLISHED RACE MOTOR @112 CC WITH STROKER CRANK AND HUGE CARB AND UMI FILTER...CUSTOM REAR SHOCK ALSO REVALVED, ALUMINUM SWING ARM {BBR EXTENDED}- ONE IND GRAPHICS, PROCIRCUT CLUTCH LEVER AND MOUNT- STAR CROSS FRONT TIRE, IRC REAR TIRE- HEAVY DUTY TUBES FRONT AND REAR----.. THIS THING RUN 42 MPH WITH A 200 RIDER AND WHEELIED THE WHOLE TIME...
http://img.photobucket.com/albums/v493/x_tremetoyz/ebay3/sdg.jpg
2003/4 LRD Aluminum frame{no cracks like new w/newwer peg mounts}
-Roll Design lobo 2 +3+1 long trave a-arms{chrome uppers}
-Roll Design lobo II long travel swing arm
-+4 RPM axle with spacers for +2 or +4
-Long travel zero preload custom axis shocks front and rear set for 190lbs
-Mayer silver plastic.race cut
-braded steel brake lines front and rear
-Roll design antivibe stering stem.w fat bar mounts
-Pro peg nerf bars
-Tag fat handlebars
-Moose aluminum thumb throtLe assambly
-lonestar aluminum rear hubs
-hose covers like braided steel
-lonestar sprocket hub
-lonestar billet carrier-
-lonestar brake block off
-full chassis skid-
-duncan front bumper
-ac grab bar
-nacs aluminum front hubs
-LSR aluminum rear hubs
-Custom one of a kind flame graphics
-carbon fiber hood with scoop
-carbon fiber tank cover
-carbon fiber shrouds
-gripper seat cover
-aluminum air box
-lsr stem mount {aluminum}
-aluminum rear brake res
-TETHER KILL SWITCH
-rtc folding clutch lever
-hand guards
-nacs aluminum seat bracket and knobs
-LSR anti fade brake hub with new rotor {not installed but included}
-aluminum magnetic drain plug
--wheels and tires-----
-----billet beadlock rear with turfs tammers- shamrock beadlocks with mxrs all CUSTOM POWDERCOATED WITH NO PLUGS AND ABOUT 90% TREAD-----
-----Motor....
-1988 solid bottom end with new gears for tighter 3 and up
-Stock cylender just got freshened up from La sleve miled and MX porting. 2 rides on it.
-ESR CR250 ignition with adj timing plate instaled
-CR250 intake and reed cage
-ESR TRX-5 3 piece pipe and silencer
-Billet alum ESR kick starter
-Billet case saver
-Cool head
-billet rear brake lever
-aluminum reed spacer
-polished covers
-keithin 39mm carb
-umi 2 stage filter
-aluminum radiator
-aluminum water pump impeller
-aluminum exhaust flange
-always run pure engine ice----
- RUNS AMAZING!-----
http://img.photobucket.com/albums/v493/x_tremetoyz/ebay3/lrd1.jpg
http://img.photobucket.com/albums/v493/x_tremetoyz/ebay3/lrd2.jpg
http://img.photobucket.com/albums/v493/x_tremetoyz/ebay3/lrd4.jpg
http://img.photobucket.com/albums/v493/x_tremetoyz/ebay3/lrd5.jpg
http://img.photobucket.com/albums/v493/x_tremetoyz/ebay3/lrd3.jpg
-----------------------------------------------------------------------------------------------------------------------------------------
2003 400ex with alot of goodies
chassis-
leager a arms {+2+1}
show polished swing arm{clear cloated}
lsr axle
lsr carrier
rtc shrouds
works stadium shocks {triple on front dual on rear with eboch springs}
ac nerfs
ac bumper
anti vibe stem
lots of billet flame on bar clamp and throttle etc
custom lights front
k&n filter
over sized oil tank
custom powder coated frame
custom carbon fiber hood with scoop
itp xcr {22 in front 20 in rear} 90% tread, on itp 190 wheels-NO PLUGS.
new silver race plastics {grey}
new bearings throughout
custom headlights {super white bright}
stainless brake lines
aluminum gas cap
custom seat cover w/tribal flames
aluminum shifter and brake
fat bars and mount
aluminum e brake block off
aluminum case saver
new chain and sprockets{ geared for the bigger tires}
ALUMINUM GAS on/off VALVE
polished front motor mounts
polished aluminum shock res holders
motor-
EDLEBROCK CARB
high comp stroked 416 kit
ported head {monster trinity stage 2 port work}
white bros exhaust
big gun cdi
hinson clutch basket
stainless valves and seats
stage 2 trinity cams
pics- {if they dont show cut and paste them}- quad is dirty from last trail ride is OKLAHOMA....
http://img.photobucket.com/albums/v493/x_tremetoyz/ebay3/400ex3.jpg
ttp://img.photobucket.com/albums/v493/x_tremetoyz/ebay3/400ex2.jpg
http://img.photobucket.com/albums/v493/x_tremetoyz/ebay3/400ex1.jpg
-------------------------------------------------------------------------------------------------------------------------------------------
20' HALMARK RACE TRAILER -
30AMP BREAK FOR THE AC/HEAT UNIT ON ROOF, SHELVES, STORAGE ON WALL FOR OILS AND SUCH, RACK FOR GAS CANS, FLOURESCENT LIGHTS, 12 VOLT LIGHTS WHILE HOOKED TO TTRUCK, VENT, CARGO DOORS, 2 5200LB AXLES BOTH WITH BRAKES---
http://img.photobucket.com/albums/v493/x_tremetoyz/ebay3/team.jpg
-------------------------------------------------------------------------------------------------------------------------------------------
SDG MINI RACE PIT BIKE-
SDG WITH 36MM RACE FORKS DIALED IN FOR 190LB RIDER , 4 SPEED MANUAL TRANS , PORTED AND POLISHED RACE MOTOR @112 CC WITH STROKER CRANK AND HUGE CARB AND UMI FILTER...CUSTOM REAR SHOCK ALSO REVALVED, ALUMINUM SWING ARM {BBR EXTENDED}- ONE IND GRAPHICS, PROCIRCUT CLUTCH LEVER AND MOUNT- STAR CROSS FRONT TIRE, IRC REAR TIRE- HEAVY DUTY TUBES FRONT AND REAR----.. THIS THING RUN 42 MPH WITH A 200 RIDER AND WHEELIED THE WHOLE TIME...
http://img.photobucket.com/albums/v493/x_tremetoyz/ebay3/sdg.jpg