Truck Exhaust?

[Ridin' Jesse]

Ok. For a while now I've been trying to find dual exhaust for a 2001 Ford F-150 4.6L. I don't want the dual exhaust out the sides though, i want the dual exhaust out the back of the truck. If anyone could help me this please reply. Thanks.

[EX400rider]

dont get them out the back get flowmasters dumped off. im gettin some monday

[Ridin' Jesse]

Why not out the back? IMO Out the back looks n sounds the best of the ones if heard n seen. And what do you mean by "dumped off?" Like stopped after the cab under the truck or?

[EX400rider]

ya like dump off at the back tire it looks and sounds the best. just go to flowmasters.com and look at the dumped off kind ur like it

[EX400rider]

i mean you will like it

[ZBlaster]

IMO opinion id go true duals, with Flowmaster 10 series and run turndowns over the axle hump, the turndown gets the echo off the ground and makes it louder, and i think sound better... if your goin out the back go to your local custom exhaust shop and have them do 2 1/2-3" piping with Flowmaster 10 series or 40 series (your choice) with high flow cats, and have them run them out the back and have a nice set of tips welded on...

[Hondadudeehhhh]

get some gibson, i know a guy that owns a pretty big company here in michigan (sport truck) and he said gibson makes the best exhaust for price

[4TraxRider]

Gibson makes some awsome exhausts. I've got a supertruck exhaust(to much resonation to have windows closed all winter) for the summer and a dual rear for the winter for less resonation. Love them both.

[Moto92]

Ive got a 2000 F150 4.6 with flowmaster 40 series. Just buy the 1 in 2 out muffler and then take it to a shop that will bend the pipes and install. I paid $80 for the 40 series and $200 for the pipes and stainless steel tips. I get compliments from people i dont know all the time on how good it sounds.

[NacsMXer]

Buy an IMCO single chamber muffler, single in dual out. Same EXACT muffler as a Flowmaster 10 series but with a mere $30 price tag. This is BY FAR the best sounding muffler on the market for the 4.6 or 5.4 F-150's. Then go to a muffler shop and get your pipes custom bent the way you want them. This is the most cost-effective way to do it. You choose your muffler and you choose how the pipes are setup ;)

[LTZ400rider]

flowmaster doesnt flow good
gibson flows even less and is too quiet
borla sounds good and flows good
magnaflow is similar

[watts16]

go w/ some glass packs



























just kidding my friend had a flow master dual in dual out and it sounds awesome:devil:

[duke416ex]

Go to an exhaust shop and they can run the pipes however you want them. Unless you want a loud exhaust, I wouldn't dump them in front of the tires. They sound good, but it will rattle the back glass and probably annoy you, I do most of mine like this, but most people that ride with me don't like it.

[coolex]

id get the flowmaster super 40

u can get the 1 in 2 out but id stick with the supper 40

[MX_Racer_20]

i've got a 2000 f-150 with 4.6 and i have a 2 1/2 inch cat back system with no muffler into a 3 inch chrome tip straight out the back and i think it sounds awesome. Its not real loud but its loud enough u hear it. Everyone keeps asking me what kind of exhaust i have on it :D

[Yee-Haw_400EX]

Here is what I've got on my two trucks:

1977 F-150 w/466ci V8
Hedman Elite Hedders (ceramic coated)
2.5" aluminumized pipe
(2) Flowmaster Super 40s w/o turndowns


1993 Ford Ranger 4.0L
(1) 2.5" Magnaflow circular muffler
2.25" single tailpipe
60º turnout chrome tip (passenger side)

[underpowered]

i love my tundowns. sounds much better than with tailpipes. had a camaro like sound with the tails, but now has a more powerful sound. it is a 1992 GMC with a flow 40 dumped before teh axle.

[ilpadrino113]

screw that cut out the mufflers alltogether with a true duel and X pipe pipe. Put em out the back or it'll be too loud for you in the cab.