raptor wheel spacers

[tintman]

anyone know the bolt pattern for the 700 raptor?
need to order wheel spacers for the beast.
any suggestions who to buy from?

thanks!

[tater_kamik]

4/110, are you going to be using front and rear spacers? if you havent used them before, you may want to do a search on using them, there are a lot of write ups in the suspension forum for them

[tintman]

rear only.
thanks for the info!

[MadDog56]

Originally posted by tater_kamik
4/110, are you going to be using front and rear spacers? if you havent used them before, you may want to do a search on using them, there are a lot of write ups in the suspension forum for them

The rear bolt pattern is 4/115, the same as the raptor 660, yfz, and most banshees and warriors.

[tintman]

i'm guessing the fronts are 4/115 and rears are 4/110
correct me if i'm wrong

[MadDog56]

Originally posted by tintman
i'm guessing the fronts are 4/115 and rears are 4/110
correct me if i'm wrong

No, the front is 4/156 and the rear is 4/115

[tintman]

cool thanks for the info

[tater_kamik]

sorry, i looked up an grizzly 660
http://www.mud-throwers.com/atv_wheel_chart

[MadDog56]

Originally posted by tater_kamik
sorry, i looked up an grizzly 660
http://www.mud-throwers.com/atv_wheel_chart

I used that chart quite a while ago, until I looked closer and found that it had quite a few errors in it. And as you'll notice it hasnt been updated to include the new bikes, like the raptor 700. A lot of the data is collected from emails from riders which isnt the most reliable source.

[tintman]

thanks for the chart!
answered my questions!
on all 4 quads.

[tater_kamik]

no prob, sorry i didnt look up the right one the first time, i was a little tired... hopefully it has the right info, i have noticed a few mistakes on there so you may want to measure yourself or try to find the info elsewhere in order to see if the info matches up!