PDA

View Full Version : Stock Rear Shock Adjustment



OTLEYEX
12-23-2005, 01:27 PM
I recently purchased a used 03 400EX. My friends tell me the rear end is to soft and too low. How do you adjust it to create a bigger space between the seat and tires? Note. This does not have a lowering kit on it. I checked. Thanks in advance for the advise you are sharing.

Wandell
12-23-2005, 09:32 PM
Just crank up the preload on the rear shock's spring. Look at the spring and you will see the threaded adjustment colar. They make a special wrench to fit it or you can just use a blunt punch and a hammer.

hondaboy400ex55
12-24-2005, 01:02 AM
hey the a good question ok to to the left side of ur bike and look at the back of the left side on the left side of ur shock ull see a almost like comprison box and turn it about 2 turn to the right with a flathead screw driver and it will stiffen ur back shock up quite a bit:D