Modified '87 250R Frame

[yfz450inMI]

Have a 1987 Honda 250R frame that has been modified to accept a Yamaha YZ/WR 4-stroke motor. Had a 2000 WR400F motor bolted in place.

Frame has been gussetted in several areas, and some cracks have been rewelded.

Asking $100 plus shipping

Will post pics tonight.

Also have stock airbox, bearing carrier, swingarm pivot bolt, rear brake caliper mount, stock steering stem clamp - make offers.

[450r51]

is the frame modified or is it just the motor mounts that are changed.

[yfz450inMI]

Lower motor mounts and rails were cut out.

Headstay mount was fab'd and welded in place.

Could put a 250R motor back in this frame easily if you have some basic fab skills.

Outside of the lower motor mounts, frame hasn't been cut up. There were some cracks that were welded, and some of the factory welds were ground down and fixed.

There are some pics here, but I'll post some frame specific pics tonight.

http://photobucket.com/albums/y242/DAMaciag/Hybrid%2005/ (Pics Here)