PDA

View Full Version : 400ex cases



Craig02
12-19-2005, 06:40 PM
These cases have 3 coats of primer, 3 coats of engine paint, and 3 coats of clear coat. Look good, only problem is where the bottom bolt for the case saver is broke out on the inside from someone using too long of a bolt. Should not leak once a case saver is installed. They have all bearings except for one crank bearing that usually stays on the crank. $90 shipped
I also have an oil pump, timing chain, and most all engine bolts.

Craig02
12-19-2005, 06:41 PM
2

Craig02
12-23-2005, 08:28 AM
3