For those with 1 1/8 handle bars...

[kx515]

I have a set of flexx bars and I need a bar clamp. I have seen that alot of people run the moose clamp. What did you do with your key and temp light?? I was thinking about getting the trail
tech clamp but the moose is alot cheaper..

[Rich250RRacer]

Originally posted by kx515
I have a set of flexx bars and I need a bar clamp. I have seen that alot of people run the moose clamp. What did you do with your key and temp light?? I was thinking about getting the trail
tech clamp but the moose is alot cheaper..

I took my temp light and taped it to my coolant overflow tube which just comes straight up now, or you could go to one of the cables. As for the key switch, I got a rubber coated cable clamp that fit tight around the switch and mounted it under the hood to one of the brackets. My quad's an '04, so I just leave the key in the on position, but if you've got an '06 with electric start, you'll have to find a place with easy access to the key.

[bpimpdaddy21]

Where can you get the Moose clamps? I only found them directly from Moose. Thanks!

[KRMit]

You can keep everything in the stock location with the Trail Tech clamp. I highly recommend it.
www.trailtech.net

[wanta450]

if u want low cost get the tusks mount light to one of the cables and put key on right side be low tank behind the rad in that pice of your plastic works great

[kx515]

Wanta 450, do you have any pic's of this set up?

[XCRACER26]

I made my own plate for the switch and the light in about 30 mins. works and looks great.