PDA

View Full Version : Parting my 250r out!



kyex40047
12-16-2005, 09:46 PM
Checking interest in these parts. It will be a few days before i can tear it down and take pictures of everything. Let me know what you guys are interested in so i can get it done first.

I might be willing to negociate some of the prices.

Honda 89 250r parts
89 frame, gusseted and pc’ed silvervien looks brand new……. $500

Laegers +1 std travel arms. Comes with laegers +1 tie rods, new tie rod ends and ball joints,89 and 88 spindles……SOLD

Laegers 89 length swingarm, 6 races old, comes with stock linkage and pivot bolt/nut…… 400

Rpm -2 - + 1 Xc axle with lifetime warranty………. $225

Lsr twin row bearing carrier, with new bearings…… $75

89 motor, this was just rebuilt completely September 04’. It had new: cases, bottom end bearings, complete counter balance, head, and Hinson clutch basket as of then. This motor was in a crate until 03 so the trans and crankshaft don’t have much more hours on them. The top end was rebuilt back in March but the bike has not been ran since April so it has like 10 hours on it. It is bored .75 over stock and has a new exhaust pipe flange too. $SOLD

Elka triple rate front shocks, piggy back, compression adjustable, valved for 190lbs rider…...SOLD

Elka dual rate completely adjustable rear shock, for stock linkage valved for a 190 lbs xc racer……SOLD

Stock white fenders with seat and gripper seat cover, look real good… SOLD

Magura Hydrolic clutch with ss line….. Sold

Houser +1 +1 chrome steering stem and antivibe clamp for big bars…. Sold

Tag t2 7/8 bars, cr high bend handle bars….. $35

Front brakes, SS lines, master cylinder with lever…..$150

Rear brake, brand new master cylinder, SS line, caliper mount….$150

IMS 4.0 gallon gas tank, natural….Sold

Radiator, lines, OMF scoops PCed candy apple red….$75

X-factor pro peg nerfs with red nets and all mounts….$125

Klein 39mm flat slide carb, almost brand new….Sold

Stock air box with hinson support ring….$35

Stock front hubs….$50

Stock Rear hubs….$45

PRM belly skid, used……SOLD

PRM swingarm skid,used…SOLD

PRM desert grab bar….$35

Delta v-force carbon fiber reed valves….$75

Stock reed valves….Sold

Stock gas tank…..Sold

Terry cable thumb throttle….$80

Motion Pro twist throttle with cable…..$50

Stock tierods….$20

Leager +1 tierods with heim joint ends that need replaced……$30

Lrd Silencer……SOLD

Duncan trx6 pipe…..$65

White Brothers power filter….$10

http://www.kyirc.com/gallery/album16/summers_001
http://www.kyirc.com/gallery/album16/summers_002
http://www.kyirc.com/gallery/album16/450r_026

efi2stroke
12-16-2005, 10:31 PM
I is your houser stem + 1 height & +1 forward over stock spec. ? and does price include shipping

kyex40047
12-16-2005, 10:37 PM
Originally posted by efi2stroke
I is your houser stem + 1 height & +1 forward over stock spec. ? and does price include shipping
yes, does not include shipping. it shouldnt be that much.

charlie99
12-16-2005, 10:55 PM
What is the lowest you will take for the lsr carrier shipped to 25801. what is the condition and how old are the bearings and seals. Which carrier is this. The make 2 versions.

kyex40047
12-16-2005, 11:01 PM
70 plus shipping is the lowest i can go. It is a billet aluminum and the bearing and seals are all brand new.

schiavo250r
12-17-2005, 03:23 PM
Send Pics of motor Please to schiavo250r@aol.com

250Renvy
12-17-2005, 10:07 PM
Sent you a pm.

Also wondering how much for the whole quad?

robyone
12-18-2005, 06:05 AM
I'll take the thumb throttle, LMK the total to 26508
are the front fenders stock, and are they for sale?

250R-Dee
12-18-2005, 08:45 AM
Does the stock tank come with the mounting hardware and petcock?

slamdak8782
12-18-2005, 05:08 PM
I want the hydraulic clutch and the carb if it is a 39 pwk thanks. Send a pm your money is waiting

kyex40047
12-18-2005, 08:21 PM
Originally posted by TRX250RJapan
Does the stock tank come with the mounting hardware and petcock?
No it is just the shell. All of that other stuff is in my ims tank

WhiteZee
12-19-2005, 09:46 PM
bump!

kyex40047
12-21-2005, 06:38 PM
I have lowered the price pn somethings. and there are a few things I forgot to put in the list. If there is nything you need for a 250r let me know and I might have it.

12-21-2005, 06:56 PM
Do you have any spare clutch covers in good condition?

Thanks

WhiteZee
12-21-2005, 10:03 PM
Originally posted by CT_330R
Do you have any spare clutch covers in good condition?

Thanks
no he does not.

250Renvy
12-22-2005, 02:54 PM
I thought I'd let everyone know, I bought parts from Michael and everything is in great shape and he's an honest seller.
I'm very pleased.

albi0609
01-16-2006, 09:57 AM
50$for the reeds

kyex40047
01-16-2006, 08:28 PM
you have a pm

kyleschonert
01-17-2006, 08:19 AM
pictures of the tags please. and which one are they, the 7/8 X-5's or the 1 1/8 t2's?

cmb19
01-18-2006, 12:39 PM
can you send me pictures of the frame thanks kenny ebonite1966@yahoo.com

WALLACE84
01-19-2006, 07:43 AM
Im intersted in the stock airbox.

efi2stroke
01-20-2006, 09:00 PM
WHERE MY STEM &CLAMP I PAID FOR 12-25-2005

WhiteZee
01-21-2006, 12:41 AM
Originally posted by efi2stroke
WHERE MY STEM &CLAMP I PAID FOR 12-25-2005
he sent that out a while ago, i know for sure. i gave him the box he shipped it in.

martell06
01-23-2006, 07:28 PM
still got those bars for sale? what color? got any pics? also looking for stock 250r rear shocks.