PDA

View Full Version : 426 kits


Honda TRX250ex
12-16-2005, 05:52 PM
who make 426 kits?
Honda TRX250ex
12-16-2005, 06:43 PM
anyone?
underpowered
12-16-2005, 06:44 PM
it is not really a Kit persay. to make a 426 all you need is a top end gasket set with an 88mm piston. You can releeve with a larger sleeve but it is not needed. JE, Ross, and wiseco all make an 88mm piston and get Cometic flexsteel gaskets. i suggest JE, but that si just personal preference.
Honda TRX250ex
12-16-2005, 06:53 PM
ohh ok because i though that with the 440 kits you need to resleve it and the same with a 426
thanks
prepracing
12-16-2005, 07:36 PM
you can buy a sleeve for the 426piston, or your stock sleeve will bore out to the size for the 426 but its the last bore on your stock sleeve. People do it both ways, but it will run a little cooler with the new sleeve
patches85
12-24-2005, 05:25 AM
Originally posted by prepracing
you can buy a sleeve for the 426piston, or your stock sleeve will bore out to the size for the 426 but its the last bore on your stock sleeve. People do it both ways, but it will run a little cooler with the new sleeve


Who sells a sleeve for the 426?
stc416rider
12-24-2005, 07:32 AM
call the guys at c and d racing