PDA

View Full Version : Shocks for a KFX/LTZ 400



dodgeram14jr
12-15-2005, 06:29 PM
I have a front set of Penske Racing Shocks for a KFX/LTZ 400. The shocks are red with blue suspension spring specialist springs(150 lb). The shock bodies are aluminum. They do have a couple nicks from normal wear. Nothing bad. The shocks end caps(on the one end of the body) and eyelets(on the ends of the shafts) are all aluminum. They are setup for a 150-175lb rider according to the guy that built them (which I used to work with). They are setup for xc and woods riding. I believe they have 125lbs of nitrogen in them. The shafts are in good shape. The springs have a couple dings. The ride height are aluminum and are in good shape. And the spring retainers are also aluminum and are in good condition and the clips for the spring retainers are in good condition. I have all the proper bushings so their is no slop between the shock itself and the mounts. All the mono balls(heim bearings) in the ends of the shocks are all in good condition and move freely. The shocks also have bump rubbers. Which are for if you bottom the shock out it hits the rubber instead of metal hitting metal and damaging the shock. All the stickers on the shocks are in good condition. Make me an offer. Or will except trades. If you would like anymore information feel free to contact me at racerdean14@yahoo.com Thanks

Lolli2
12-28-2005, 06:46 AM
Any pictures? Price?

fast_enough
01-14-2006, 02:14 PM
Any pics? I'll trade you this full DMC exhaust for them

dodgeram14jr
01-18-2006, 04:34 PM
if anyone wants pics pm me your email address. Thanks

fast_enough
01-18-2006, 07:24 PM
Sorry man, I decided a while back to keep my pipe, I like it alot